عنوان

Field-assisted sintering :

شابک

3319760327

شابک

3319760335

شابک

9783319760322

شابک

9783319760339

شابک اشتباه

3319760319

شابک اشتباه

9783319760315

عنوان اصلي

Field-assisted sintering :

نام عام مواد

[Book]

ساير اطلاعات عنواني

science and applications /

نام نخستين پديدآور

Eugene A. Olevsky, Dina V. Dudina.

محل نشرو پخش و غیره

Cham, Switzerland :

نام ناشر، پخش کننده و غيره

Springer,

تاریخ نشرو بخش و غیره

[2018]

نام خاص و کميت اثر

1 online resource

متن يادداشت

Includes bibliographical references.

متن يادداشت

Intro; Preface; Acknowledgments; Contents; About the Authors; Chapter 1: Introduction; 1.1 A Brief Historical Overview; 1.2 Thermal and Nonthermal Effects in Field-Assisted Sintering; 1.2.1 Thermal Effects in Field-Assisted Sintering; 1.2.2 Nonthermal Effects in Field-Assisted Sintering; References; Chapter 2: Resistance Sintering; 2.1 Principle and Physical Mechanisms of Resistance Sintering; 2.2 Resistance Sintering Equipment; 2.3 Properties of Specimens Processed by Resistance Sintering; 2.4 Summary; References; Chapter 3: Sintering by High-Voltage Electric Pulses.

متن يادداشت

3.1 Principle and Physical Mechanisms of High-Voltage Consolidation3.2 Stages of High-Voltage Consolidation; 3.3 Processes at Inter-particle Contacts During High-Voltage Consolidation; 3.4 High-Voltage Electric Discharge Consolidation (HVEDC) Apparatus; 3.5 High-Energy High-Rate (HEHR) Consolidation Setup; 3.6 Capacitor Discharge Sintering (CDS) Setup; 3.7 Pulse Plasma Sintering (PPS) Setup; 3.8 Briquetting by Electric Pulse Sintering; 3.9 Pulsed Current-Assisted Shock Consolidation; 3.10 Densification Kinetics Imposed by HVEDC.

متن يادداشت

3.11 Selected Examples of Materials Processed by High-Voltage Electric Pulse Consolidation3.12 Summary; References; Chapter 4: Sintering by Low-Voltage Electric Pulses (Including Spark Plasma Sintering (SPS)); 4.1 Principle and Physical Mechanisms of Low-Voltage Electric Pulse Sintering; 4.2 Low-Voltage Electric Pulse Sintering Equipment; 4.3 Macroscopic Temperature Gradients in SPS; 4.4 Temperature Measurements and Heat Dissipation in SPS/FAST Facilities; 4.5 Proportional-Integral-Derivative (PID) Control of Temperature During SPS and Regulation Quality Improvement.

متن يادداشت

4.6 ``Plasma ́́Issue in SPS4.7 Processes at the Inter-particle Contacts in SPS; 4.8 The Effect of High Heating Rates: Experimental Studies; 4.9 Modeling of the SPS Processes; 4.9.1 Macroscopic Level of Analysis; 4.9.2 Microscopic Level of Analysis: Grain-Boundary Diffusion Driven by Externally Applied Load and Surface Tension; 4.9.3 Microscopic Level of Analysis: Power-Law Creep Driven by Externally Applied Load and Surface Tension; 4.9.4 Theoretical Analysis of the Effect of High Heating Rates in the SPS; 4.9.5 Influence of Thermal Diffusion; 4.9.6 Contribution of Electromigration.

متن يادداشت

4.9.7 Constitutive Equation of SPS Taking into Account the Enhanced Dislocation Motion by Local Resistive Heating4.10 Selected Examples of Processes and Materials Developed Using SPS; 4.10.1 Processing and Testing Methods Developed Using SPS Equipment; 4.10.2 Joining of Materials by SPS; 4.10.3 Surface Engineering by SPS; 4.10.4 Dense Materials with Improved Properties Obtained by SPS; 4.10.5 Porous Materials by SPS; 4.11 Summary; References; Chapter 5: Flash Sintering; 5.1 Principle of Flash Sintering; 5.2 Mechanisms of Flash Sintering; 5.3 Materials Densified by Flash Sintering; 5.4 Summary.

بدون عنوان

0

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

متن يادداشت

This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.

منبع سفارش / آدرس اشتراک

Springer Nature

شماره انبار

com.springer.onix.9783319760322

عنوان

Field-assisted sintering.

شماره استاندارد بين المللي کتاب و موسيقي

9783319760315

موضوع مستند نشده

Sintering.

موضوع مستند نشده

Materials science.

موضوع مستند نشده

Metals technology-- metallurgy.

موضوع مستند نشده

Sintering.

موضوع مستند نشده

TECHNOLOGY & ENGINEERING-- Technical & Manufacturing Industries & Trades.

موضوع مستند نشده

Welding.

موضوع مستند نشده

TEC-- 040000

موضوع مستند نشده

TGM

موضوع مستند نشده

TGM

موضوع مستند نشده

TNC

موضوع مستند نشده

TNC

شماره

ويراست

شماره رده

مستند نام اشخاص تاييد نشده

Olevsky, Eugene A.

مستند نام اشخاص تاييد نشده

Dudina, Dina V.

تاريخ عمليات

20200823110542.0

قواعد فهرست نويسي ( بخش توصيفي )

pn

نام الکترونيکي

نوع ماده

[Book]

تكميل شده

Y