در این پایان نامه جریان سیال تراکم ناپذیر دو بعدی روی استوانه با صفحه جداگر زاویهدار بررسی میشود .این استوانه در داخل کانال و عمود بر جریان سیال قرار میگیرد و صفحه جداگر در قسمت پشت استوانه در یک نقطه به استوانه متصل میشود .برای بررسی تاثیرات صفحه جداگر بر میدان سرعت و دما، ابعاد هندسی مشخصی در نظر گرفته میشود .شبکه مناسب برای این بررسی در نرم افزار گمبیت تولید میشود و برای حل معادلات حاکم بر جریان پیوستگی، مومنتوم و انرژی از مناسبترین الگوریتم روش حجم محدود که در نرم افزار فلوئنت موجود است، استفاده میشود .در ابتدا نتایج بهدست آمده با نتایج موجود اعتبارسنجی میشود، سپس تاثیر پارامترهای مختلف مانند :عدد رینولدز، نسبت طول صفحه جداگر به قطر استوانه و همچنین تغییر زاویه صفحه جداگر روی ضریب پسا و عدد نوسلت، مورد بررسی قرار میگیرد .محدوده تغییر نسبت طول صفحه جداگر به قطر استوانه از ۵/۰ تا ۲ و محدوده تغییر زاویه صفحه جداگر از ۰ تا ۹۰ درجه میباشد .ضریب پسای استوانه با افزایش نسبت طول صفحه جداگر به قطر استوانه کاهش مییابد .همچنین با افزایش زاویه صفحه جداگر ضریب پسا کاهش پیدا میکند .عدد نوسلت استوانه نیز با افزایش نسبت طول به قطر استوانه کاهش مییابد، کاهش عدد نوسلت با افزایش زاویه صفحه جداگر با ثابت ماندن نسبت طول به قطر استوانه، ادامه مییابد
متن يادداشت
In this study the two-dimensional incompressible fluid flow over a cylinder with a rotated splitter plate is investigated. This configuration is located in cross flow inside the channel. To investigate the effects of the splitter plate on the velocity and temperature fields, specific geometric dimensions are considered. The governing equations of continuity, momentum and energy were be solved by FLUENT software. Control volume method with PISO algorithm is applied to solve the governing equations. First, the results are validated with the existing data in literature. Then the effects of different geometric parameters such as the length and angle of the splitter plate and Reynolds number on the flow field and heat transfer are investigated and interpreted. The splitter plate length varies from 0.5D to 2D and the degree of splitter plate angle varies from 0 to 90 with Reynolds numbers 1,10,100,200,500,1000,1200 and 1500. With increasing the splitter plate length Drag coefficient decreased continuously and the surface Nusselt number of cylinder is decreased. Also with increasing the angle of splitter plate Drag coefficient and the surface Nusselt number of cylinder are reduced
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )