سنتز الاستومرهای پلییورتانی فاقد بلورینگی بخش نرم و بررسی خواص فیزیکی-مکانیکی آن
نام عام مواد
[پایان نامه]
نام نخستين پديدآور
حسین علیزاده
وضعیت نشر و پخش و غیره
نام ناشر، پخش کننده و غيره
صنعتی سهند
تاریخ نشرو بخش و غیره
۱۴۰۲
مشخصات ظاهری
نام خاص و کميت اثر
۶۳ص.
ساير جزييات
مصور، جدول، نمودار
مواد همراه اثر
CD
یادداشتهای مربوط به پایان نامه ها
جزئيات پايان نامه و نوع درجه آن
کارشناسی ارشد
نظم درجات
مهندسی پلیمر- فراورش
زمان اعطا مدرک
۱۴۰۲/۰۶/۰۱
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
پلی یورتان¬ها دسته¬ای مهم از پلیمرها هستند که از واکنش بین پلی ال¬ها و ایزوسیات¬ها سنتز می¬شوند. این پلیمر¬ها دارای ساختار دوفازی می¬باشند که در مقیاس میکرو دارای جدایش فازی هستند. خواص فیزیکی و مکانیکی پلی¬یورتان¬ها متأثر از نوع و میزان بخش¬سخت و نرم، و همچنین برهمکنش بین این دو فاز است و با تغییر وزن مولکولی و نسبت بخش¬نرم به سخت، الاستیسیته، استحکام کششی و کرنش در نقطه شکست تغییر می¬یابد. با افزایش میزان بخش¬سخت، پیوندهای هیدروژنی، استحکام نهایی، مدول یانگ و دمای فرآیندپذیری نیز افزایش می¬یابد. یکی از مهم¬ترین پارامترها در بررسی رفتار پلی¬یورتان¬ها، بلورینگی بخش¬نرم است که با افزایش بلورینگی بخش¬نرم، خاصیت الاستومری کاهش می¬یابد به عبارت دیگر تشکیل بلور در بخش¬نرم، تاثیر منفی بر روی الاستیسیته¬ی رابری دارد. نامتقارن یا شبه¬متقارن بودن ایزوسیانات به دلیل ایجاد ممانعت فضایی، از تشکیل بلور در بخش¬نرم جلوگیری می¬کند. به منظور سنتز پلی¬یورتان¬های الاستومری فاقد بلورینگی، در این پژوهش از پلی ال با بلورینگی کم و از ایزوسیانات¬های نامتقارن که با ایجاد ممانعت فضایی، از تشکیل بلور در بخش¬نرم جلوگیری می¬کند، استفاده می¬شود. ساختار شیمیایی مواد اولیه و پلی یورتان-های سنتز شده، توسط آزمون طیف سنجی مادون قرمز تبدیل فوریه(FTIR) مورد بررسی قرار گرفت که سنتز موفقیت آمیز پلی¬یورتان¬ها تایید شده و میزان پیوندهای هیدروژنی گروه¬های کربونیل و N-H پلی یورتان¬های سنتز شده به کمک طیف¬های FTIR مربوطه محاسبه گردید و تغییرات مورفولوژی فازی مشخص گردید. برای بررسی خواص حرارتی، مورفولوژی فازی و بلورینگی نمونه¬ها از آزمون گرماسنج پویشی تفاضلی(DSC) استفاده شد. برای بررسی خواص فیزیکی و محاسبه میزان بلورینگی از الگوی پراش اشعه ایکس (XRD) استفاده گردید که نتایج این آزمون¬ها نشان¬دهنده¬ی سنتز موفقیت آمیز پلی¬یورتان دارای خاصیت الاستومری فاقد بلورینگی بخش¬نرم تا دمای 0C90- می¬باشد. برای بررسی میزان جدایش فازی از آنالیز میکروسکوپ نیروی اتمی (AFM) استفاده شد که تأییدی برای نتایج میزان جدایش فازی به دست آمده از آزمون FTIR می باشد.
متن يادداشت
Polyurethanes are one of the important class of polymers that are synthesized from the reaction between polyols and isocyanates. These polymers includes two-phase structure which are separated in micro scale. The physical and mechanical properties of polyurethanes are affected by the type and amount of hard and soft segments, as well as the interaction between these two segments, and by changing the molecular weight and the ratio of soft to hard segments, elasticity, tensile strength and elongation at break change. Also, by increasing the amount of hard segment, hydrogen bondings, ultimate strength, Young's modulus and processability temperature also increase. One of the most important parameters in the investigation of the behavior of polyurethanes is the crystallinity of the soft segment. As the crystallinity of the soft segment increases, the elastomeric property decreases. Or the pseudo-symmetry of isocyanate prevents crystal formation in the soft segment due to steric hindrance. Therefore, to increase the elasticity of polyurethane elastomers, the soft segment must be free of crystallinity. In this study, polyols with low crystallinity and asymmetric isocyanates will be used, which prevent the formation of crystals in the soft segment by creating spatial hindrance. The chemical structure of all the synthesized polyols, isocyanates and polyurethanes were examined by Fourier transform infrared spectroscopy (FTIR) test, which confirmed the successful synthesis of the samples and also the amount of Carbonyl and N-H hydrogen bondings for synthesised polyurethane samples were calculated with FTIR , which determined the phase morphology changes. Differential scanning calorimetry (DSC) was used to study the thermal properties, phase morphology and crystallinity of the samples. X-ray diffraction pattern (XRD) was used to study the physical proprties of the samples and calculate the degree of crystallinity. Atomic force microscope (AFM) was used to study phase separation of samples, And that was confirmation on FTIR's data . the results of the tests illustrate that our synthesis was successful and synthetic polymer includes elastomeric properties without crystal formation up to 90 0C.
عنوانهای گونه گون دیگر
عنوان گونه گون
Synthesis of polyurethane elastomers with non crystalline soft segment and investigation of its physical-mechanical properties
موضوع (اسم عام یاعبارت اسمی عام)
موضوع مستند نشده
الاستومر
موضوع مستند نشده
پلی یورتان
موضوع مستند نشده
بلورینگی
اصطلاحهای موضوعی کنترل نشده
اصطلاح موضوعی
الاستومر/ پلی یورتان/ بلورینگی
اصطلاح موضوعی
Elastomer/ Polyurethane/ Crystallinity
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )