عنوان

Advanced engineering for processes and technologies /

شابک

303005621X

شابک

3030056228

شابک

9783030056216

شابک

9783030056223

شابک اشتباه

3030056201

شابک اشتباه

9783030056209

عنوان اصلي

Advanced engineering for processes and technologies /

نام عام مواد

[Book]

نام نخستين پديدآور

Azman Ismail, Muhamad Husaini Abu Bakar, Andreas Öchsner, editors.

محل نشرو پخش و غیره

Cham :

نام ناشر، پخش کننده و غيره

Springer,

تاریخ نشرو بخش و غیره

2019.

نام خاص و کميت اثر

1 online resource (x, 337 pages)

عنوان فروست

Advanced structured materials,

مشخصه جلد

volume 102

شاپا ي ISSN فروست

1869-8433 ;

متن يادداشت

Intro; Preface; Contents; 1 Three Dimensional Simulation of Filling Process for Stacked-Chip Scale Packages; Abstract; 1 Introduction; 2 Numerical Model; 3 Simulation Setup; 4 Results and Discussion; 5 Conclusion; References; Conference Proceeding; Book Chapter; 2 Analysis of Temperature Distribution Behavior of Motorcycle Brake Pads; Abstract; 1 Introduction; 1.1 Problem Statement; 1.2 Objective; 1.3 Scope and Limitation; 2 Literature Review; 3 Methodology/Experimental Set-Up/Model Set-Up; 3.1 Modeling Software; 3.2 Solidworks (Part Modeling); 3.3 Material Properties; 3.4 Thermal Analysis

متن يادداشت

2.1.1 Processor in the Loop (PIL)2.1.2 Chopper Operation Controller; 2.1.3 Subsequent and Delay Controller (SAD); 2.1.4 IGBT Firing Controller (IFC); 2.1.5 Signal Conversion; 2.1.6 Signal Serial Transmission and Baud Rate; 2.1.7 Data String Protocol; 2.1.8 Hardware in the Loop Processing Time; 2.1.9 Processor in the Loop Test Experiment; 2.1.10 Accelerator and Brakes Signals; 3 Result; 4 Conclusion; References; 6 Comparative Study of Fuel Consumption, Acceleration and Emission for Road Vehicle Using LPG or Gasoline; Abstract; 1 Introduction; 1.1 Physical Properties and Characteristics for LPG

متن يادداشت

2.2.6 Target Output Signals for ANN Training2.3 Neural Network Training; 2.3.1 NN Training Results; 2.4 Testing the ANN; 3 Neural Network Controller Final Testing and Results; 3.1 Development of Complete Simulation Model; 3.2 Performance Index (PI); 3.3 Results; 4 Conclusion; References; 5 Processor in the Loop for Testing Series Motor Four Quadrants Drive Direct Current Chopper for Series Motor Driven Electric Car; Abstract; 1 Introduction and Review; 1.1 Proposed Four Quadrant DC Drive Chopper Design; 2 Simulation Model Established from Mathematics Equation; 2.1 Methodology

متن يادداشت

3.5 Mesh Generations3.6 Condition; 4 Results and Discussion; 5 Discussion; 6 Conclusion; Acknowledgements; References; 3 Application of a Portable Coordinate Measuring Machine onto Automotive Door Panel for Quality Inspection Activity; Abstract; 1 Introduction; 2 Problem Statement; 3 Frequent Inspection; 3.1 Coordinate Measuring Machine; 3.2 The Portable CMM; 4 Methodology; 5 Results and Discussion; 5.1 Inspection Time; 5.2 Data Reliability; 5.3 Cost Saving and Other Benefits; 6 Conclusion; References

متن يادداشت

4 Study on Implementation of Neural Network Controlling Four Quadrants Direct Current ChopperAbstract; 1 Introduction and Review; 1.1 Four Quadrants Drive DC Chopper and Chopper Operation Controller; 1.2 Chopper Operation Controller; 1.3 Neural Network as Chopper Operation Controller; 2 Methodology; 2.1 Proposed Control Strategy; 2.2 Neural Network Data Training Preparation Process; 2.2.1 Neural Network Data Preparation; 2.2.2 Accelerator and Brakes Signals; 2.2.3 Predetermined Chopper Operation; 2.2.4 Matlab/Simulink Simulation Model; 2.2.5 Gathering Data for NN Training

بدون عنوان

0

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

متن يادداشت

This volume contains many state-of-the-art applications for the development of new materials and technologies. It discusses computer-based engineering tools which are widely used and related to the simulation, evaluation of data and design processes. For example, modern joining technologies can be used to fabricate new compound or composite materials, even composed of dissimilar materials. Such materials are many times exposed to harsh environments and must reveal specific properties. Technologies in this context are mainly related to the transportation technologies in their wider sense. This means automotive and marine technology, i.e., ships, amphibious vehicles, docks, offshore structures, and even robots. Typically, finite element and finite volume methods are used in the context of engineering simulations and this volume highlights their importance.

منبع سفارش / آدرس اشتراک

Springer Nature

شماره انبار

com.springer.onix.9783030056216

عنوان

Advanced engineering for processes and technologies.

شماره استاندارد بين المللي کتاب و موسيقي

9783030056209

موضوع مستند نشده

Engineering.

موضوع مستند نشده

Materials.

موضوع مستند نشده

Engineering.

موضوع مستند نشده

Materials.

موضوع مستند نشده

SCI096000

موضوع مستند نشده

TGMD

موضوع مستند نشده

TGMD

شماره

ويراست

شماره رده

مستند نام اشخاص تاييد نشده

Abu Bakar, Muhamad Husaini

مستند نام اشخاص تاييد نشده

Ismail, Azman

مستند نام اشخاص تاييد نشده

Öchsner, Andreas

تاريخ عمليات

20200823081705.0

قواعد فهرست نويسي ( بخش توصيفي )

pn

نام الکترونيکي

نوع ماده

[Book]

تكميل شده

Y