بررسی ترمواکونومیکی و بهینه سازی سیکل تبرید جذبی دو اثره لیتیوم بروماید /آب با به کارگیری اجکتور
First Statement of Responsibility
/لیلی گروسی فرشی
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: دانشکده فنی مهندسی مکانیک
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۱۴۵ص
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی
INTERNAL BIBLIOGRAPHIES/INDEXES NOTE
Text of Note
بصورت زیرنویس
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
دکترا
Discipline of degree
رشته مهندسی مکانیک- تبدیل انرژی
Date of degree
۱۳۹۱/۱۱/۰۵
Body granting the degree
دانشگاه تبریز
SUMMARY OR ABSTRACT
Text of Note
در رساله حاضر سه آرایش مختلف سیکلهای تبرید جذبی دو اثره لیتیوم بروماید/آب تحلیل شده و عملکرد آنها از دیدگاه ترمودینامیکی و اقتصادی مقایسه شده است .این بررسی با مدلسازی سیکلها در نرمافزار EES انجام گرفته و خواص جدید و دقیقتر ترموفیزیکی محلول لیتیوم بروماید/آب به صورت توابع داخلی در نرمافزار تعریف شده است .نتایج حاصل نشانگر این مطلب است که آرایشهای موازی و موازی معکوس هم از دیدگاه قوانین اول و دوم ترمودینامیک و هم احتمال وقوع پدیده کریستالیزاسیون بر آرایش سری برتری دارند .تحلیل ترمواکونومیکی این آرایشها حاکی از این مطلب است که با تغییر شرایط عملکردی، هر کدام از انواع آرایشها میتواند دارای قیمت محصول پایینتر بوده و از لحاظ ترمواکونومیکی بر دیگری برتری یابد .در ادامه کار یک سیکل ترکیبی دواثره-اجکتور پیشنهاد شده و عملکرد آن با سیکل متداول تبرید جذبی دو اثره مقایسه شده است .از مهمترین نتایج حاصل میتوان به تأثیر به سزای استفاده از اجکتور در بهبود عملکرد سیکلهای تبرید جذبی دو اثره اشاره کرد .به عبارت دیگر بازهای از دماهای منابع گرمایی وجود دارد که برای استفاده در سیکل تک اثره بالا بوده ولی توانایی راهاندازی سیکل دو اثره را نداشته و یا سیکل دو اثره با استفاده از این منابع حرارتی ضریب عملکرد بسیار پایین دارد .سیکل ترکیبی در این بازه دمایی به طور چشمگیری بهتر از هر دو سیکل عمل میکند .بهینهسازی ترمواکونومیکی سیکلهای مورد بررسی با هدف کمینه کردن نرخ هزینه محصول انجام گرفته است و نشان میدهد که سیکل ترکیبی در شرایط عملکرد بهینه خود علاوه بر اینکه به خوبی توانایی استفاده از منابع گرمایی دما پایین را دارد، در این شرایط دارای نرخ هزینه محصول پایینتری نسبت به مقدار مربوط به شرایط بهینه سیکل دو اثره است
Text of Note
ejector cycle is proposed and its performance is compared with the conventional absorption refrigeration cycles. The comparison indicated the great impact of the ejector in improving the performance of double effect absorption cycle. It is shown that the combined cycle performs much better than the single effect and series double effect absorption cycles, from the view points of both thermodynamics and economics, in the range of heat source temperatures which is high for the single effect and low for the double effect configurations. Thermoeconomic optimization was carried out for each of the cycle configuration to minimize the product cost flow rate. The optimization results too showed the potential of the combined cycle to compete with the conventional absorption cycles -pends on the cycle working condition. A novel combined double effect-tion from the point of view of both the first and second laws of thermodynamics as well as of the possibility of crystallization. Thermoeconomic analysis of these three configurations showed that none of these configurations are superior to each other and that the cost of product unit de-veloped in the Engineering Equation Solver (EES) software for which more accurate lithium bromide property relations are introduced. It was revealed that the parallel and reverse parallel double effect absorption refrigeration cycles are superior to the series double effect configura-In the present thesis, three configuration of LiBr/water double effect absorption refrigeration cycles are analyzed in detail and their performance are compared from the view points of both thermodynamics and economics. The comparison is performed through computer programs de