بکارگیری بهینه سازی توپولوژی ساختاری برای باز شو دار کردن جان تیرهای فولادی
First Statement of Responsibility
/علی مقصودی اسبفروشانی
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: عمران
Date of Publication, Distribution, etc.
، ۱۳۹۵
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی عمران گرایش سازه
Date of degree
۱۳۹۵/۱۲/۲۲
Body granting the degree
تبریز
SUMMARY OR ABSTRACT
Text of Note
روش بهینه سازی تکاملی سازه ها (ESO) برای ایجاد طرح بهینه) وزن کم و سختی بیشتر(، به حذف تدریجی مصالح ناکارآمد از دامنه طراحی می پردازد .در این یایان نامه روی بکارگیری تکنیک بهینه سازی توپولوژی ساختاری برای سوراخدار کردن جان تیرهای فولادی دوسر گیردار با مقطع I شکل به عنوان گامی در جهت جایگزینی با تیرهای سوراخ دار سنتی و شناخت بهتر مکانیسم های تحت خمش و برش تمرکز می کنیم .پیکربندی بهینه ی سوراخ های جان براساس نتایج حاصل از تحقیقات پارامتری پیشنهاد شده است .مطالعه ی بهینه سازی توپولوژی روی جان تیر فولادی UB ۳۰۵ ۱۶۵ ۴۰ با مقطع I شکل با تیکه گاه های گیردار و دهانه ۵m انجام گرفت .تحلیل FE بکار رفته است تا عملکرد تیر بهینه سازی شده درمقایسه با تیر سوراخ دار متعارف که کاربرد گسترده ای نیز دارد، تعیین شود .جای دادن سوراخ درون جان تیرهای فولادی با مقطعI ، نسبت جرم به سختی مقطع را بهبود می بخشد .هدف اصلی از این تحقیق بررسی پتانسیل پیکربندی های مختلف سوراخ ها در تیرها با استفاده از تکنیک بهینه سازی توپولوی ساختاری می باشد .این نتیجه حاصل شد که تیر بهینه سازی شده از نظر ظرفیت تحمل بار، تغییر شکل، و شدت تنش، عملکرد بهتری دارد .تحلیل غیر خطی مصالح وغیر خطی هندسی برای تعیین بار کمانش انجام شد .تحلیل و مقایسه نتایج با استفاده از نرم افزار آباکوس انجام گرفت.
Text of Note
40 was selectedA materially and geometric nonlinear FE analysis approach was implemented to determine the buckling load of the beam web. The comparative nonlinear FE analysis studies were performed using ABAQUS v.6.14.2 165 evolutionary structural optimization (ESO) is based on the simple idea that the optimal structure (maximum stiffness, minimum weight) can be produced by gradually removing the ineffectively used material from the design domain. This Thesis focuses on the application of structural topology optimisation technique to design steel fixed beams perforated I-sections as a first attempt to replace the traditional cellular beams and better understand the mechanisms involved when subjected to bending and shear actions. An optimum web opening configuration is suggested based on the results of parametric studies. A FE analysis is further employed to determine the performance of the optimised beam in comparison to the conventional widely used cellular type beam. The placement of openings within the web of steel I-section beams improves the mass-to-stiffness ratio of the section. Initially, a topology optimisation study was performed on the web of a fixed supported steel I-section beam of a 5 m span. A typical UB 305