عنوان

Thermal system design and simulation /

(Number (ISBN

0128094303

(Number (ISBN

9780128094303

Erroneous ISBN

0128094494

Erroneous ISBN

9780128094495

Title Proper

Thermal system design and simulation /

General Material Designation

[Book]

First Statement of Responsibility

P.L. Dhar.

Place of Publication, Distribution, etc.

Cambridge, MA :

Name of Publisher, Distributor, etc.

Academic Press is an imprint of Elsevier,

Date of Publication, Distribution, etc.

[2017]

Specific Material Designation and Extent of Item

1 online resource (viii, 608 pages .)

Text of Note

Front Cover; Thermal System Design and Simulation; Copyright; Contents; Preface; Chapter 1: Introduction; 1.1 Outline of the Book; Reference; Chapter 2: Mathematical Background; 2.1 Linear Algebraic Equations; 2.1.1 Difficulties Encountered in Gaussian Elimination; 2.2 Nonlinear Algebraic Equations; 2.2.1 Warner's Method; 2.3 Equation Fitting; 2.3.1 Generalized Linear Regression; 2.3.2 Nonlinear Regression; 2.4 Differential Equations; 2.4.1 Single-Step Methods; 2.4.2 Multistep Methods; Adams-Bashforth Method; Adams-Moulton Method; 2.4.3 Systems of Equations; 2.4.4 Boundary Value Problems.

Text of Note

2.5 Laplace Transformation2.5.1 Transfer Function; 2.6 Analysis of Uncertainty; 2.7 Engineering Economics; 2.7.1 Time Value of Money; 2.7.2 Present Worth Analysis; 2.7.3 Rate of Return Analysis; 2.7.4 Life Cycle Costing; Reference; Chapter 3: Review of Fundamentals; 3.1 Thermodynamics; 3.1.1 Thermodynamics of Multicomponent Systems; 3.1.2 Thermodynamics of Reactive Mixtures; 3.2 Fluid Flow; 3.2.1 Compressible Flow; 3.2.2 Two-Phase Flow; 3.3 Heat Transfer; Conduction; Fourier's Law of Heat Conduction; Radiation; Stefan-Boltzmann Law; Convection; Newton's Law of Cooling.

Text of Note

3.3.1 Conductive Heat Transfer3.3.2 Radiative Heat Transfer; 3.3.3 Convective Heat Transfer; Forced Convection; External Flow; Isothermal Flat Plate; Cross Flow Over a Long Isothermal Cylinder for ReD Pr> 0.2; Cross Flow Across a Bank of Isothermal Cylinders; Internal Flow; Fully Developed Laminar Flow; Fully Developed Turbulent Flow; Vertical Flat Surfaces; Churchill and Chu Correlation [22]; Simplified Correlations; Horizontal Surfaces; Heat Transfer With Phase Change; Heat Transfer in Condensation; Heat Transfer in Boiling; 3.4 Mass Transfer; 3.4.1 Simultaneous Heat and Mass Transfer.

Text of Note

4.1.6 Microchannel Heat ExchangersFlow Through Microchannels; 4.2 Heat and Mass Exchangers; 4.2.1 Cooling and Dehumidifying Coils; 4.2.2 Cooling Towers and Spray Washers; 4.2.3 Heat and Mass Exchangers Using Desiccants; Liquid Desiccant Dehumidifier/Regenerator; Mass Balance of Moisture Content; Air; Desiccant Solution; Energy Balance; Sensible Heat Transfer From Air; Desiccant; Water; Solid Desiccant Dehumidifier; 4.3 Reciprocating Devices; 4.3.1 Reciprocating Compressor; Kinematic Equation; Thermodynamic Equation; Equation of Motion for the Valves; Equation for Flow Through the Valves.

Text of Note

ReferenceChapter 4: Modeling of Thermal Equipment; 4.1 Heat Exchangers; 4.1.1 Single-Pass Parallel and Counter-Flow Heat Exchangers; 4.1.2 Single-Pass Cross-Flow Heat Exchanger; 4.1.3 Multipass Heat Exchangers; 4.1.4 Heat Exchangers With Varying Heat-Transfer Coefficients; (a) Shell and Tube Heat Exchanger With Phase Change in the Tube-Side Fluid; (b) Shell and Tube Heat Exchanger With Phase Change in the Shell-Side Fluid; 4.1.5 Pressure Drop; (a) Plate-Fin Heat Exchangers; (b) Tube Fin Heat Exchangers; (c) Shell and Tube Heat Exchangers; (d) Plate Heat Exchangers.

0

8

8

8

8

Text of Note

Thermal System Design and Simulation covers the fundamental analyses of thermal energy systems that enable users to effectively formulate their own simulation and optimal design procedures. This reference provides thorough guidance on how to formulate optimal design constraints and develop strategies to solve them with minimal computational effort. The book uniquely illustrates the methodology of combining information flow diagrams to simplify system simulation procedures needed in optimal design. It also includes a comprehensive presentation on dynamics of thermal systems and the control systems needed to ensure safe operation at varying loads. Designed to give readers the skills to develop their own customized software for simulating and designing thermal systems, this book is relevant for anyone interested in obtaining an advanced knowledge of thermal system analysis and design.

Source for Acquisition/Subscription Address

MIL

Stock Number

965986

Title

Thermal system design and simulation.

International Standard Book Number

0128094494

Engineering design.

Engineering design.

TECHNOLOGY & ENGINEERING-- Mechanical.

TEC-- 009070

Number

Edition

Class number

Book number

Dhar, P. L.

Date of Transaction

20200822084843.0

Cataloguing Rules (Descriptive Conventions))

pn

Electronic name

[Book]

Y