عنوان

Advances in Cryogenic Engineering

(Number (ISBN

9781475705379

(Number (ISBN

9781475705393

Number

b403754

Title Proper

Advances in Cryogenic Engineering

General Material Designation

[Book]

Other Title Information

Proceedings of the 1959 Cryogenic Engineering Conference University of California, Berkeley, California September 2-4, 1959 /

First Statement of Responsibility

edited by K. D. Timmerhaus.

Place of Publication, Distribution, etc.

Boston, MA :

Name of Publisher, Distributor, etc.

Imprint: Springer,

Date of Publication, Distribution, etc.

1960.

Series Title

Advances in Cryogenic Engineering,

Volume Designation

5

ISSN of Series

0065-2482 ;

Text of Note

Applications and Techniques -- A-0 Cryogenic Engineering Advances in the Space Age -- A-1 Air Core Cryogenic Magnet Coils for Fusion Research and High-Energy Nuclear Physics Applications -- A-2 Design of Large Cryogenic Magnet Coils -- A-3 Cryogenic Experience with the 72-Inch Bubble Chamber -- A-4 Large-Scale Production, Handling, and Storage of Liquid Hydrogen -- A-5 A Study of the Hazards in the Storage and Handling of Liquid Hydrogen -- A-6 Test Equipment and Procedures Used in the Development of Liquid Oxygen-Hydrogen Rocket Engines -- A-7 Practical Storage and Distribution of Liquid Hydrogen and Helium -- Missile Technology -- B-1 Handling Liquid Fluorine in Rocket Applications -- B-2 Handling Liquid Hydrogen on a Pilot-Plant Scale -- B-3 Cryogenic Tankage for Space Flight Applications -- B-4 Transfer of Liquid Hydrogen through Uninsulated Lines -- B-5 Flexibility Considerations for the Design of Cryogenic Transfer Lines -- B-6 Facilities for Testing Rocket Engine Components Using Cryogenic Fluids as Propellants -- Insulation -- C-1 Externally Bonded and Sealed Insulation for Liquid-Hydrogen-Fueled Rocket Tanks -- C-2 Flat Panel Vacuum Thermal Insulation and the Super-Dewar Flask -- C-3 Metal Powder Additives in Evacuated-Powder Insulation -- C-4 Effect of Condensation on Conventionally Insulated Cryogenic Tanks -- C-5 A Study of Condensing-Vacuum Insulation -- C-6 Low-Temperature Insulating Systems -- Superinsulation -- D-1 Development of High-Efficiency Insulation -- D-2 Multiple-Layer Insulation -- D-3 Engineering Aspects of Heat Transfer in Multilayer Reflective Insulation and Performance of NRC Insulation -- D-4 Characteristics and Applications of Some Superinsulations -- D-5 Cryogenic Insulation Development -- Heat Transfer -- E-1 Heat Transfer to Helium II for Big Differences of Temperature between Heated Wall and Superfluid Helium Bath -- E-2 Transient Phenomena Associated with the Pressurization of Liquid Nitrogen Boiling at Constant Heat Flux -- E-3 Recent Developments of the Reversing Exchanger -- E-4 Design, Construction, and Testing of a Helium-to-Hydrogen Heat Exchanger -- E-5 Boiling Heat Transfer to Liquid Hydrogen from Flat Surfaces -- E-6 Nucleate- and Film-Boiling Studies with Liquid Hydrogen -- Design and Application -- F-1 On the Evacuation of Plastic Foams to Reduce Their Thermal Conductivity -- F-2 The Venturi Tube as a Liquefied-Gas Flow Measuring Device -- F-3 High-Pressure Liquid-Hydrogen and -Helium Pumps -- F-4 A Volumetric Flowmeter for Liquid Oxygen -- F-5 Results of Flowmeter Calibration in Liquid Hydrogen -- F-6 Crew Compartment Environmental Control Utilizing Cryogenic Fluids -- Liquefaction and Refrigeration -- G-1 A Closed Infrared Detector Cooling System -- G-2 Miniature Joule-Thomson Refrigeration Systems -- G-3 Continuous Refrigeration between 4.2 and 1°K -- G-4 The Liquefaction of Natural Gas -- G-5 Design, Construction, and Performance of a Laboratory-Size Helium Liquefier -- G-6 A New Low-Temperature Gas Expansion Cycle: Part I -- G-6 A New Low-Temperature Gas Expansion Cycle: Part II -- Mechanical Properties -- H-1 The Strength of Ten Structural Adhesives at Temperatures Down to -424° F -- H-2 The Behavior of High-Magnesium-Content Aluminum Alloys at Room and Liquid-Nitrogen Temperatures -- H-3 Some Mechanical Properties of Magnesium Alloys at Low Temperatures -- H-4 Mechanical Properties of High-Strength 301 Stainless Steel Sheet at 70, -320, and -423° F in the Base Metal and Welded Joint Configurations -- H-5 The Low-Temperature Mechanical Properties of Some Selected Austenitic Manganese Steels -- H-6 The Tensile and Impact Properties of Plate and Welds of Aluminum Alloy 5083-H113 between 75 and -320°F -- Fluid Phenomena -- J-1 Single-Phase Flow Tests with Liquid Hydrogen -- J-2 Gas-Pressurized Transfer of Liquid Hydrogen -- J-3 A Survey of Stratification in a Cryogenic Liquid -- J-4 Transient Phenomena Associated with the Pressurized Discharge of a Cryogenic Liquid from a Closed Vessel -- J-5 Pressure-Temperature Histories of Liquid Hydrogen under Pressurization and Venting Conditions -- J-6 An Experimental Study Concerning the Pressurization and Stratification of Liquid Hydrogen -- J-7 Temperature Distribution in Liquid and Vapor Phases of Helium in Cylindrical Dewars -- J-8 Measuring Vapor-Liquid Ratios during Flow by a Capacitance Method -- Processes and Data -- K-1 A Kinetics Study of Ortho-Para Hydrogen Conversion -- K-2 Refrigeration Below -100° C -- K-3 Effective Density of Boiling Liquid Oxygen -- K-4 Maximum-Rate Theory of Impact Sensitivity -- K-5 Composition and Analysis of Commercial Liquid Oxygen -- K-6 Experimental Large-Scale Equipment for Low-Temperature Distillation Tray Studies -- K-7 A Compilation and Correlation of the P-V-T Data of Normal Hydrogen from Saturated Liquid to 80° K -- K-8 The Cryogenic Data Center -- Additional Papers -- L-1 An Improved dc Power Regulator -- L-2 Vacuum Gaskets for Use at 20° K -- Author Index.

0

International Standard Book Number

9781475705393

Title

Springer eBooks

Science (General).

Timmerhaus, K. D.

SpringerLink (Online service)

Date of Transaction

20190301073500.0

Electronic name

[Book]

Y