عنوان

Castings practice

(Number (ISBN

0080476414

(Number (ISBN

0080476414

(Number (ISBN

1417537000

(Number (ISBN

1592782787

(Number (ISBN

6611008942

(Number (ISBN

9780080476414

(Number (ISBN

9781417537006

(Number (ISBN

9781592782789

(Number (ISBN

9786611008949

Erroneous ISBN

0750647914

Number

b402172

Title Proper

Castings practice

General Material Designation

[Book]

Other Title Information

the 10 rules of castings /

First Statement of Responsibility

John Campbell.

Place of Publication, Distribution, etc.

Boston :

Name of Publisher, Distributor, etc.

Elsevier/Butterworth-Heinemann,

Date of Publication, Distribution, etc.

2004.

Specific Material Designation and Extent of Item

1 online resource (xii, 205 p.) :

Other Physical Details

ill.

Text of Note

Rev. ed. of: Castings. Oxford : Butterworth-Heinemann, 1991.

Text of Note

Includes bibliographical references (p. [195]-198) and index.

Text of Note

Cover -- Contents -- Dedication -- Preface -- Summary -- Rule 1. Achieve a good quality melt -- 1.1 Background -- 1.2 Melting -- 1.3 Holding -- 1.4 Pouring -- 1.5 Melt treatments -- 1.5.1 Degassing -- 1.5.2 Additions -- 1.6 Filtration -- 1.6.1 Packed beds -- 1.6.2 Alternative varieties of filters -- 1.6.3 Practical aspects -- Rule 2. Avoid turbulent entrainment (the critical velocity requirement) -- 2.1 Maximum velocity requirement -- 2.2 The ǹo fall' requirement -- 2.3 Filling system design -- 2.3.1 Gravity pouring of open-top moulds -- 2.3.2 Gravity pouring of closed moulds -- 2.3.3 Horizontal transfer casting -- 2.3.4 Counter-gravity -- 2.3.5 Surface tension controlled filling -- 2.3.6 Inclusion control: filters and traps -- 2.3.7 Practical calculation of the filling system -- Rule 3. Avoid laminar entrainment of the surface film (the non-stopping, non-reversing condition) -- 3.1 Continuous expansion of the meniscus -- 3.2 Arrest of vertical progress -- 3.3 Waterfall flow -- 3.4 Horizontal stream flow -- 3.5 Hesitation and reversal -- Rule 4. Avoid bubble damage -- 4.1 Gravity-filled running systems -- 4.2 Pumped and low-pressure filling systems -- Rule 5. Avoid core blows -- 5.1 Background -- 5.2 Prevention -- Rule 6. Avoid shrinkage damage -- 6.1 Feeding systems design background -- 6.1.1 Gravity feeding -- 6.1.2 Computer modelling of feeding -- 6.1.3 Random perturbations to feeding patterns -- 6.1.4 Dangers of solid feeding -- 6.1.5 The non-feeding roles of feeders -- 6.2 The seven feeding rules -- Rule 1: Do not feed -- Rule 2: Heat-transfer requirement -- Rule 3: Mass-transfer requirement -- Rule 4: Junction requirement -- Rule 5: Feed path requirement -- Rule 6: Pressure gradient requirement -- Rule 7: Pressure requirement -- 6.3 The new feeding logic -- 6.3.1 Background -- 6.3.2 The new approach -- 6.4 Active feeding -- 6.5 Freezing systems design -- 6.5.1 External chills -- 6.5.2 Internal chills -- 6.5.3 Fins -- Rule 7. Avoid convection damage -- 7.1 Convection: the academic background -- 7.2 Convection: the engineering imperatives -- 7.3 Convection damage and casting section thickness -- 7.4 Countering convection -- Rule 8. Reduce segregation damage -- Rule 9. Reduce residual stress (the ǹo water quench' requirement) -- 9.1 Introduction -- 9.2 Residual stress from casting -- 9.3 Residual stress from quenching Running system calculation record 191 -- 9.4 Distortion -- 9.5 Heat treatment developments -- 9.6 Epilogue -- Rule 10. Provide location points -- 10.1 Datums -- 10.2 Location points -- 10.2.1 Rectilinear systems -- 10.2.2 Cylindrical systems -- 10.2.3 Trigonal systems -- 10.2.4 Thin-walled boxes -- 10.3 Location jigs -- 10.4 Clamping points -- 10.

0

Text of Note

Each chapter of Professor Cambell's new book Castings Practice will take a look at one of his 10 rules. It is to be expected that the Rules wil one day be taken as an outline or blueprint for an international specification on the methods for making reliable castings. John Cambell has over two decades of experience in the casting industry and is the author of over 40 technical papers and patents. He has become well-known in the foundry industry as the originator of the Cosworth casting process, which is becoming accepted throughout the world as a new production process for the casting of cylin.

Title

Castings practice.

International Standard Book Number

9780750647915

Founding.

Metal castings.

Fonderie.

Pièces moulées.

Fundição.

TECHNOLOGY & ENGINEERING-- Technical & Manufacturing Industries & Trades.

Campbell, John,1938-

Campbell, John,1938-

Knovel (Firm)

Date of Transaction

20120619085816.0

Electronic name

[Book]

Y