Intro; Preface; Contents; About the Editors; Application of Response Surface Methodology to Optimize the Reaction Parameters for Grafting of Cellulosic Fiber; 1 Introduction; 2 Methodology; 2.1 Materials; 2.2 Methods; 2.3 Statistical Analysis; 2.4 Characterization; 3 Results and Discussion; 3.1 Statistical Study via Response Surface Methodology (RSM); 3.2 Characterization; 4 Conclusions; References; Bioregeneration of Granular Activated Carbon Adsorbed with Analytical-Grade Hydroquinone Compound Using Mixed Bacterial Culture; 1 Introduction; 2 Methodology; 2.1 Adsorption Study
متن يادداشت
2 Development of Rain Garden3 Research on Rain Garden's Performance; 3.1 Hydrologic Impact; 4 Water Quality Improvement; 4.1 Nitrogen and Phosphorus Removal; 4.2 Removal of BOD and Pathogens; 5 Implementation Issues; 6 Bioretention Modelling Research; 7 Summary and Conclusion; References; Al-Fe and Al-Ti Pillared Saponite Clay Catalysts: Preparation and Characterization; 1 Introduction; 2 Materials and Method; 2.1 Materials; 2.2 Catalyst Preparation; 2.3 Characterization Techniques; 3 Results and Discussion; 3.1 Fourier Transform Infrared Spectroscopy (FTIR) Analysis
متن يادداشت
2.2 Microorganism and Culture Conditions2.3 Bioregeneration; 3 Results and Discussion; 3.1 Adsorption of Hydroquinone on Granular Activated Carbon; 3.2 Bioregeneration; 4 Conclusions; References; Bearing Capacity Improvement of Sand Bed Reinforced with 3D Geogrids of Rectangular Pattern; 1 Introduction; 2 Materials; 3 Experimental Setup; 4 Results and Discussion; 4.1 Effect of Depth to First Layer of 3D Geogrid; 4.2 Effect of Spacing Between Two Layers; 4.3 Effect of Number of Layers; 5 Conclusions; References; Rain Garden-A Solution to Urban Flooding: A Review; 1 Introduction
متن يادداشت
3.2 X-Ray Diffraction (XRD) Analysis3.3 Surface Area (BET) Analysis; 3.4 Scanning Electron Microscope (SEM); 3.5 Wavelength Dispersive X-Ray Fluorescence (WD-XRF); 3.6 Thermogravimetric/Derivative Thermogravimetric (TG/DTG) Analysis; 4 Conclusions; References; Performance-Based Seismic Evaluation of Multi-storey R.C.C. Building with Addition of Shear Wall; 1 Introduction; 2 Methodology; 2.1 Description of Analysed Buildings; 2.2 Loads Considered; 3 Results and Discussion; 3.1 Capacity Curve; 3.2 Status of Hinges at Ultimate Stage; 3.3 Capacity Demand Spectrum; 3.4 Storey Drift; 4 Conclusions
بدون عنوان
0
بدون عنوان
8
بدون عنوان
8
بدون عنوان
8
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
This volume contains selected papers presented during the International Conference on Environmental Geotechnology, Recycled Waste Material and Sustainable Engineering (EGRWSE-2018). The multidisciplinary articles in this volume discuss environment-friendly technologies and the application of 'smart' solutions and initiatives to improve infrastructure and services, with a strong emphasis on sustainability and conservation of resources. This volume will be of interest to engineers, professionals, and researchers working on improving urban infrastructure and strengthen civic amenities in a sustainable manner.
یادداشتهای مربوط به سفارشات
منبع سفارش / آدرس اشتراک
Springer Nature
شماره انبار
com.springer.onix.9789811367175
ویراست دیگر از اثر در قالب دیگر رسانه
عنوان
Sustainable engineering.
شماره استاندارد بين المللي کتاب و موسيقي
9789811367168
موضوع (اسم عام یاعبارت اسمی عام)
موضوع مستند نشده
Sustainable engineering, Congresses.
موضوع مستند نشده
Sustainable engineering.
موضوع مستند نشده
TECHNOLOGY & ENGINEERING-- Engineering (General)
موضوع مستند نشده
TECHNOLOGY & ENGINEERING-- Reference.
مقوله موضوعی
موضوع مستند نشده
RBGK
موضوع مستند نشده
RBP
موضوع مستند نشده
RBP
موضوع مستند نشده
TEC-- 009000
موضوع مستند نشده
TEC-- 035000
رده بندی ديویی
شماره
620
.
8
ويراست
23
رده بندی کنگره
شماره رده
TA170
نشانه اثر
.
S87
2018
نام شخص - (مسئولیت معنوی برابر )
مستند نام اشخاص تاييد نشده
Agnihotri, Arvind Kumar
مستند نام اشخاص تاييد نشده
Bansal, Ajay
مستند نام اشخاص تاييد نشده
Reddy, Krishna
نام تنالگان به منزله سر شناسه - (مسئولیت معنوی درجه اول )
مستند نام تنالگان تاييد نشده
International Conference on Environmental Geotechnology, Recycled Waste Material and Sustainable Energy, (2018)