طراحی و ساخت بریس خودکار پا) ران- زانو- مچ و انگشتان پا(
Leg automatic brace design and development
/یونس هوشمند
: فنی مهندسی مکانیک
، ۱۳۹۷
، افشاری
۶۱ص
چاپی - الکترونیکی
کارشناسی ارشد
ساخت و تولید
۱۳۹۷/۱۱/۳۰
تبریز
بریس به وسیلهای گفته میشود که به عملکرد اندام یا عضو کمک میکند .بریس ها میصتوانند ثابت یا متحرک باشند .بریس مورد مطالعه در این پایان نامه، بریس پا است که شامل ران، زانو، مچ و کف پا است و برعکس بریس های ثابت پا، به صورت متحرک میصباشد .مزیت مهم این بریس نسبت به بریس های دیگر این است که قفل مفصل زانو به کمک نیروی وزن بیمار و بدون دخالت دست انجام می شود و استفاده از فنر در مفصل زانو به ماهیچه های ضعیف شده زانو در هنگام راه رفتن کمک می کند .این مزیت بریس خودکار باعث افزایش طول گام و در نهایت باعث بهبود ماهیچه های ران و زانو می شود .در مرحله اول به طراحی بریس در برنامه سالیدورکز پرداخته شده است .همچنین با بررسی طرح های مختلف بریس و انتخاب بهترین نوع و رفع اشکال طرح های مختلف به ساخت بریس در درمانگاه جمعیت هلال احمر و کارگاه مجهز پرداخته شده است .در بریس ساخته شده از مکانیزم مکانیکی برای قفل کردن زانو در هنگام ایستادن و از مکانیزم الکتریکی برای گام برداری استفاده شده است .در قسمت الکتریکی از موتور الکتریکی دورانی برای کشش فنر، برای تعیین حد از لیمیت سوئیچ و از یک برد الکتریکی برای فرمان دادن استفاده شده است .بریس ساخته شده در این پایان نامه، روی افراد با مشکلات حرکتی امتحان شد و نتایج آزمایش نشان داد که استفاده از این وسیله باعث افزایش طول گام، افزایش مسافت طی شده توسط بیمار و درمان ماهیچه های آسیب دیده می شود
Brace is a device that helps organ or limb function. Braces can be fixed or vibrant. The brace examined in this thesis is a foot brace that includes the thighs, knees, ankles, and feet, and on the contrary to the fixed braces of the foot, it is movable. An important advantage of this brace compared to other braces is that the knee joint locks aided by the weight of the patient without using hands and the equipment of a spring helps the weakened muscles of the knee while walking. This automatic brace advantage increases stroke length and ultimately improves the thigh and knee muscles. In the first step, the studies were obtained theoretically and then on the design of the brace in the Solid works program. Also, by studying different brace designs and choosing the best types and fixing various designs for brace making in the Red Crescent Society Clinic and well equipped workshop. The brace consists of a mechanical mechanism for locking the knee while standing and an electric mechanism for stepping. In the electrical field of a rotary electric motor for pulling a spring, a Limit Switcher is used to determine the limit and an electric command line for steering. The brace made in this article is tested on subjects with motor problems and the results of the test indicate that using this device increases the length of the step, the distance traveled by the patient and treatment of the damaged muscles