بررسی تاثیر متغیر های فرآیند نقطه جوش اصطکاکی،اغتشاشی بر خواص مکانیکی ومیکروسکوپی آلیاژ آلومینیوم سری۵۷۵۴
/مسعود انصاری لاله
: پردیس
، ۱۳۹۶
، افشاری
چاپی
کارشناسی ارشد
مکانیک گرایش ساخت وتولید
۱۳۹۶/۱۱/۲۴
تبریز
نقطهجوش اصطکاکی، اغتشاشی FSSW جزو روش جوشکاری حالتجامد میباشد و بهعنوان مهمترین پیشرفت در اتصال فلزات در دهه اخیر مطرحشده است. در این تحقیق به بررسی و مقایسه تأثیر زمان مماس ابزار با قطعه کار و دور ابزار بر خواص میکروسکوپی ،میزان میکرو سختی و میزان نیروی برشی نقطهجوش ایجادشده به روش اصطکاکی اغتشاشی FSSW بر روی آلیاژ آلومینیوم سری ۵۷۵۴ پرداخته شد .نیروی فشاری ابزار،جنس، هندسه و اندازه ابزار، جهت دوران ابزار و میزان عمق نفوذ ثابت فرض شده است.قطعه کار با استفاده از فیکسچر مخصوص درروی دستگاه رادیال گیره بندی شد و توسط این دستگاه عملیات جوشکاری نقطهای اصطکاکی اغتشاشی انجام شد .پارامترهای ورودی دور و زمان مماس ابزار تحت روشهای استاندارد آماری مورد آزمایش قرار گرفت و پارامترهای خروجی شامل :تغییرخواص میکروسکوپی، میزان میکروسختی ونیروهای برشی در ناحیه جوش اندازهگیری شد .تاثیر مقدار دور و زمان مماس ابزار در خواص میکروسکوپی نقطهجوش و همچنین تاثیر آنها در مقدارمیکرو سختی ونیروی برشی منطقه نقطهجوش از یافتههای این تحقیق به شمار میرود .نتیجهگیری شد که با افزایش دور ابزار و یا زمان مماس ابزار دمای اصطکاکی افزایشیافته و این افزایش دما باعث رشد کریستالی ناحیه جوش گردیده، میزان سختی ونیروی برشی نیز در ناحیه HAZافزایشیافته و خواص میکروسکوپی نیز بصورت اختلاط یافته و ریزدانه مشاهده شد
The Friction stir spot welding FSSW is part of solid welding method and It has been mentioned as the most important advancement in the connection of metals in the last decade. In this study, the effect of tangential time of the tool with the workpiece and tool rotation speed on the microscopic structure, the micro hardness and the rate of shear force of the spot weld created by the friction stir metod FSSW on the aluminium alloy 5754 Series were investigated. The compressive force of the tool, material, geometry, and tool size, tool rotation direction and the depth of leading of the tool are must invariable considered.The workpiece was clamped using a special fixture on the radial machine and friction stir spot welding operation was performed by this machine. Input parameters of tool rotation and time by standard statistical methods were tested and The output parameters including microscopic properties, micro hardness and shear rates in welding region were measured. The effect of the amount of rotation and tangential time of the instrument on the microscopic properties of the spot welding as well as their effect on the micro hardness and shear force of the spot welding zone are the findings of this study. It was concluded because increase tool rotation speed or tangential time of the tool, the frictional temperatur increased and this increase caused the grain crystallined development of the weld region, the micro hardness and shear force increased in the HAZ region and the microscopic properties was also stired and fine grain observed