طراحی یک موتور بدون جاروبک شار محوری با فناوری مدارات چاپی برای کاربردهای پزشکی
[پایان نامه]
مریم میرزالو
صنعتی سهند
۱۴۰۱
۶۲ص.
مصور، جدول، نمودار
CD
کارشناسی ارشد
مهندسی برق- الکترونیک
۱۴۰۱/۱۰/۰۱
امروزه با افزایش قابلیت کنترل و تحریک الکترونیکی، موتور¬های بدون جاروبک با آهنربای دائم (PM) کاربرد وسیعی در صنعت و پزشکی به دست آوردهاند. در این پایاننامه به طراحی، شبیه¬سازی و تحلیل عملکرد یک موتور الکتریکی سنکرون پرداخته میشود که کاربرد مهندسی پزشکی خواهد داشت. موتور موردنظر، یک ماشین جریان مستقیم ، بدون جاروبک و شار محوری هست. آهنرباهای دائم بر روی روتور و سیم¬پیچ¬های تحریک بر روی استاتور نصبشده¬اند. در این موتور از دو نوع سیمپیچ استفادهشده است؛ ابتدا سیم¬پیچی با استفاده از فناوری مدارات چاپی (PCB) موردمطالعه قرارگرفته و سپس از سیمپیچهای معمولی (قرقره¬ای) استفاده می¬گردد. با استفاده از روابط حاکم بر میدان الکترومغناطیس، میزان گشتاور موتور در موقعیت¬های مختلف زاویه آهنرباهای دائم روتور موردبررسی قرار می¬گیرند. از چالشهای مهم در طراحی این موتور می¬توان به کوچکسازی ابعاد با تمرکز بر روی هندسه آن اشاره نمود. همچنین در طول طراحی به امکان ساخت داخلی موتور و بومیسازی فناوری آن توجه خاصی شده است.
Today, with the increase in electronic control and excitation, permanent magnet (PM) brushless motors have gained wide application in industry and medicine. In this thesis, the design, simulation and performance analysis of a synchronous electric motor will be used in medical engineering. The motor in question is a direct current machine, without brushes and axial flux. Permanent magnets are installed on the rotor and excitation coils on the stator. Two types of coils are used in this engine; First, the winding is studied using printed circuit board (PCB) technology, and then ordinary windings are used. By using the relations governing the electromagnetic field, the amount of motor torque in different positions of the angle of the permanent magnets of the rotor are examined. One of the important challenges in the design of this engine can be mentioned the minimization of the dimensions by focusing on its geometry. Also, during the design, special attention has been paid to the possibility of internal manufacturing of the engine and localization of its technology.
Design of a Brushless Axial Flux Motor based on Printed Circuit Board Technology for Medical Application
موتور بدون جاروبک
موتور شار محوری
موتور با آهنربای دائم
موتور بدون جاروبک، موتور شار محوری، موتور با آهنربای دائم
brushless motor, axial flux motor, permanent magnet motor