بررسی تأثیر روش سنتز بر عملکرد نانوفتوکاتالیستهای CuO-ZnO/Clinoptilolite برای حذف آنتیبیوتیک از فاضلاب تحت نور مرئی
[پایاننامه]
Investigation of effect of synthesis method on performance of CuO-ZnO/Clinoptilolite composite nanophotocatalysts for degradation of antibiotics form wastewater under visible light
/سمیه ابراهیمزاده
: مهندسی شیمی
، ۱۳۹۸
۷۳ص.
:
زبان: فارسی
زبان چکیده: فارسی
چاپی - الکترونیکی
مصور، جدول، نمودار
کارشناسی ارشد
مهندسی شیمی- ترموسینتیک و کاتالیست
۱۳۹۸/۱۰/۰۱
صنعتی سهند
در این پایان نامه نانوفتوکاتالیستهای اکسید مس-اکسید روی-کلینوپتیلولیت با نسبت جرمی ۴:۱:۵ به روشهای هیدروترمال، رسوبی، تبادل یونی و تلقیح سنتز شدند .نانوفتوکاتالیستهای ذکر شده به کمک آنالیزهایXRD ،FESEM ،FTIR ،Vis DRS- UV، EDX و BET/BJH تعیین خصوصیات شدند .نتایج حاصل از خصوصیتسنجی نمونههای سنتز شده به روشهای مختلف نشان داد روش سنتز تأثیر بسیار زیادی بر خواص فتوکاتالیست چند جزئی دارد .در همه نانوفتوکاتالیستهای سنتز شده مس به صورت CuO وجود داشت اما در نانوفتوکاتالیست سنتزی به روش هیدروترمال علاوه بر نانو بلورهای مکعبیCuO ،Cu ۲ Oنیز مشاهده شد .جذب نور مرئی در این نمونه در مقایسه با دیگر نمونهها بیشتر و گاف انرژی آن ۲/۶ الکترون ولت بود .این نمونه سطح ویژه زیادی داشت، علاوه بر حفرات مزو، حفرات میکرو نیز در این نمونه وجود داشت، اجزاء به خوبی روی سطح کلینوپتیلولیت توزیع یافته بودند و تقابل خوبی بین اجزاء مشاهده میشد .حذف فتوکاتالیستی تتراسایکلین نشان داد بیشترین مقدار تخریب تتراسایکلین ( ۸۸) در فتوکاتالیست سنتز شده به روش هیدروترمال مشاهده شد .در نهایت تأثیر تغییر پارامترهای عملیاتی از جملهpH ، غلظت تتراسایکلین و مقدار فتوکاتالیست نیز بر روی عملکرد این نمونه بررسی شد و در نهایت تست پایداری نمونه منتخب مورد مطالعه قرار گرفت.
In this thesis, copper oxide-zinc oxide-clinoptilolite nanophotocatalysts were synthesized in 4:1:5 mass ratio by hydrothermal, percipitation, ion exchange and impregnation methods. The characterization of the synthesized photocatalysts was performed by XRD, FESEM, FTIR, UV-Vis DRS, EDX and BET/BJH analyzes. The results showed that synthesis method has a high impact on physiochemical properties of multi component photocatalyst. In all samples, copper exsited as CuO but in the hydrothermal synthesized sample, in addition to cubic nano cryastallites of CuO, Cu2O was present as well. Visible light absorption of this samle was the highest and the band gap was 2.6 eV. This photocatalyst had a high surface area, in addition to mesopores, had micropores. Copper oxide and zinc oxide were distributed well on clioptilolite and good interaction among components was observed in the hydrothermal synthesized sample. Photocatalytic degradation of tetracycline indicated the highest degradation (88 ) was observed by the sample synthesized by hydrothermal method. Finally, the effect of operating parameters such as pH, tetracyclin concentration, and the amount of photocatalyst were also studied and finally the stability test of the selected sample was investigated.
ba
Investigation of effect of synthesis method on performance of CuO-ZnO/Clinoptilolite composite nanophotocatalysts for degradation of antibiotics form wastewater under visible light