عنوان

Metal, ceramic and composite materials :

168015687X

3038269220

9781680156874

9783038269229

b582940

Metal, ceramic and composite materials :

[Book]

selected, peer reviewed papers from the 2015 International Conference on Metal, Ceramic and Composite Materials (ICMCCM-2015), January 24-25, 2015, Shanghai, China

Edited by Christian Coddet.

Zurich

Trans Tech Publishers

2015

(183 p. :) il.

Advanced Materials Research, 1102.

Dynamic Mechanical Thermal Analysis of Arenga Pinnata Fibre Reinforced Epoxy Composites: Effects of Alkaline Treatment.

Metal, Ceramic and Composite Materials; Preface, Committee and Sponsors; Table of Contents; Chapter 1: Metal Materials, Alloys and Heat Treatment of Metals; Effect of Heat Treatment on the Creep Properties of Zr-1Nb-0.12O Nuclear Cladding Tubes; Mechanical Performance and Ductility of Cu/Al/Cu Clad Metals; Study of Co-Mn/TiO2 SCR Catalyst at Low Temperature; Hot Deformation and Cracking during Compression of 21-4N Steel; The 6N01 Aluminum Components by Orthogonal Design Optimization. Effect of Heat Treatment on Galvanic Corrosion of Cu/Al/Cu Clad Soaked in 3.5% NaCl Brine Solution; Relation between the Betti Number of Fatigue Fracture Surfaces and Stress Intensity Factors of Low Carbon Steel (JIS, S45C); Chapter 2: Ceramic Materials and Processing of Ceramics; High Thermal Stability of Mo/Si3N4/Mo/Si3N4/SiO2 Multilayer Solar Selective Coatings; Validation of a Novel Approach for CO2/N2 Gas Separations by Means of a Hybrid Ceramic Membrane; Chapter 3: Composites, Advanced Materials and Nano Materials; Baddeleyite Type Monoclinic Zirconium Oxide Nanocrystals Formation. Effects of Selenization Conditions on the Properties of Cu-In-Ga-Se Thin Films Prepared by Pulsed Laser Deposition; Effect of Nano-Oxide Addition on Mechanical Properties of Alumina-Mullite-Zirconia Composites; Hydrogen Separation Using Inorganic Membranes; Magnesium Phosphate/Polybutylene Succinate Composite for Bone Repair; Characterisation of Inorganic Composite Ceramic Membrane for Lactic Acid Esterification Processes; Fatigue Life of Arenga Pinnata/Epoxy Composites; Preparation and Electrical Properties of Graphene/PEK-c Films. Estimation for the Si-O Structures Based on the Homology Concept; Chapter 4: Mechanical Behavior and Characterization of Materials, Technologies in Materials Engineering; Penetration Performance of Shaped Charge Jets Using Insensitive Munition: Simulative and Experimental Studies; Encapsulation of Lanthanide [Beta]-diketone Hybrids in Organic Oligomer Poly(ethylene glycol) 400; Relationship between Solid Lubricant Layer and Friction Coefficient of PPS Races-PTFE Retainer Hybrid Thrust Bearings under Dry Condition; An Image Analyzing Method by a Homology Concept for Fracture Surfaces. Emission Factors for Dioxin for Coal Burning, Secondary Smelting and Alloying of Aluminum, and Cement Kiln Processes; Effect of Shot Peening Coverage on Fatigue Strengths of Steels and Aluminum Alloy; Patch Designing for Damaged Metallic Structure Repaired with Adhesively Bonded Composite Patch; Application of the Betti Number to Prior Austenite Grain Size Analysis of Repeatedly Quenched Steel Based on the Homology Method; Effect of Heat Treatment on the Mechanical Properties and Interface Structure of 3-ply Ti/Cu/Ti Clad Composite.

Collection of selected, peer reviewed papers from the 2015 International Conference on Metal, Ceramic and Composite Materials (ICMCCM-2015), January 24-25, 2015, Shanghai, China. The 34 papers are grouped as follows: Chapter 1: Metal Materials, Alloys and Heat Treatment of Metals; Chapter 2: Ceramic Materials and Processing of Ceramics; Chapter 3: Composites, Advanced Materials and Nano Materials; Chapter 4: Mechanical Behavior and Characterization of Materials, Technologies in Materials Engineering.

Edited by Christian Coddet.

Christian Coddet

[Book]

Y