International Union of Theoretical and Applied Mechanics.
1 (Chairmen: D. C. Drucker, K. Kawata) --; Analyses of high velocity tension of bars of finite length of bcc and fcc metals with their own constitutive equations --; Dynamic deformation of materials and structures under explosive loadings --; 2 (Chairmen: L. E. Malvern, K. Tanaka) --; Deformation maps in the region of high dislocation velocity --; Dislocation configurations due to plate impact --; Experimental studies on the behaviour of dislocations in copper at high rates of strain --; Dislocation concepts in the mechanics of rapid deformation of metals --; 3 (Chairmen: U. S. Lindholm, J. Shioiri) --; Some results on the dynamic deformation of copper --; Dynamic strength of Ti-alloys and Al-alloys --; Steady state deformation and dynamic restoration processes during high strain rate and high temperature deformation in metals and alloys --; 4 (Chairmen: W. Goldsmith, T. Hayashi) --; Impact failure mechanisms in fiber-reinforced composite plates --; Computer simulation of dislocation groups dynamics under applied constant stress and its application to yield problems of mild steel --; Computer modeling of microscopic failure processes under dynamic loads --; Calculation of spall damage accumulation in ductile metals --; Observation of atomic behavior in crystal during shock compression by flash X-ray diffraction --; The influence of high-rate deformation on structure and properties of materials in the presence of stress concentrators --; 5 (Chairmen: W. Johnson, T. Nakamura) --; On the behaviour of the process region at a fast running crack tip --; Crack propagation in plastics due to impact --; Loads and crack velocities during dynamic fracture --; 6 (Chairmen: K. B. Broberg, S. Kawashima) --; Approximate calculations of spall and cratering in high speed impact --; Fracture and void development in hemi-spherical ended Perspex rods due to stress waves from detonators --; Spallation resulting from high-velocity impacts --; Micro-dynamical effects in high speed loading of porous metals --; Wave propagation and dynamic response analysis of rate dependent materials --; 7 (Chairmen: L. W. Morland, H. Fukuoka) --; Plane wave propagation in anisotropic jointed media --; Behavior of materials under dynamic combined stresses of torsion and tension --; An analysis of elastic-plastic waves by the continuum theory of dislocations --; Recent results in micromechanics --; On supersonic and transonic impact of solids --; Identification of dynamic properties and wave propagation in viscoelastic bars --; Results for the single ricochet of spherical-ended projectiles off sand and clay at up to 400 m/sec --; An experimental study on the penetration of rigid projectiles into epoxy resin targets --; 8 (Chairmen: E. H. Lee, K. Kiyota) --; On the transient response of long beams subjected to high velocity transverse impact --; High speed deformation of shells --; Shock and vibration characteristic of solid rocket vehicles --; 9 (Chairmen: M. Stelly, T. Jimma) --; Some phenomena at the interface in hypervelocity impact of metals and its application to lamination of metal plates --; A fundamental study on head impact problem by finite element method --; High velocity impact of mild steel cylinder --; Dynamic frictional effects as measured from the split Hopkinson pressure bar --; Activities of the research committee of shock-resistant structures for automobile --; Discussion.