Advances in rock-support and geotechnical engineering /
[Book]
Shuren Wang, Paul C. Hagan, Chen Cao
xi, 410 pages :
illustrations ;
24 cm
Includes bibliographical references and index
Machine generated contents note: 1. Rock Testing -- 1. Instability Characteristics of a Single Sandstone Plate -- 2. Instability Characteristics of Double-Layer Rock Plates -- 3. Rupture and Energy Analysis of Double-Layer Rock Plates -- 4. Double-Layer Rock Plates With Both Ends Fixed Condition -- 5. Viscoelastic Attenuation Properties for Different Rocks -- 6. Cutting Fracture Characteristics of Sandstone -- 7. Energy Dissipation Characteristics of Sandstone Cutting -- 8. Fracture Properties on the Compressive Failure of Rock -- References -- Further Reading -- 2. Rockbolting -- 1. Mathematical Derivation of Slip Face Angle -- 2. A Mechanical Model for Cone Bolts -- 3. Effect of Introducing Aggregate Into Grouting Material -- 4. Optimizing Selection of Rebar Bolts -- 5. Poisson's Ratio Effect in Push and Pull Testing -- 6. Study on Rockbolting Failure Modes -- 7. Steel Bolt Profile Influence on Bolt Load Transfer -- 8. Tensile Stress Mobilization Along a Rockbolt -- References --
Note continued: 1. Three-Dimensional Deformation Effect and Optimal Excavated Design -- 2. Stability Analysis of Three-Dimensional Slope Engineering -- 3. Fracture Process Analysis of Key Strata in the Slope -- 4. Parameters Optimization of the Slope Engineering -- 5. Key Technologies in Cut-and-Cover Tunnels in Slope Engineering -- 6. Potential Risk Analysis of a Tailings Dam -- 7. A New Landslide Forecast Method -- References -- Further Reading -- 6. Mining Geomechanics -- 1. Analytical Analysis of Roof-Bending Deflection -- 2. Analytical Solution of the Roof Safe Thickness -- 3. Catastrophe Characteristics of the Stratified Rock Roof -- 4. Pressure-Arch Analysis in Coal Mining Field -- 5. Analysis of Accumulated Damage Effects on the Roof -- 6. Tunnel and Bridge Crossing the Mined-Out Regions -- 7. Pressure-Arch Analysis in Horizontal Stratified Rocks -- 8. Pressure-Arch in a Fully Mechanized Mining Field -- References -- Further Reading
Note continued: Further Reading -- 3. Grouted Cable -- 1. Load Transfer Mechanism of Fully Grouted Cable -- 2. Theoretical Analysis of Load Transfer Mechanics -- 3. Impacting Factors on the Design for Cables -- 4. Mechanical Properties of Cementitious Grout -- 5. Anchorage Performance Test of Cables -- 6. Axial Performance of a Fully Grouted Modified Cable -- 7. Sample Dimensions on Assessing Cable Loading Capacity -- References -- Further Reading -- 4. Tunnel Engineering -- 1. Construction Optimization for a Soft Rock Tunnel -- 2. Water Inrush Characteristics of Roadway Excavation -- 3. Lining Reliability Analysis for Hydraulic Tunnel -- 4. Disturbance Deformation of an Existing Tunnel -- 5. Energy Dissipation Characteristics of a Circular Tunnel -- 6. Pressure-Arch Evolution and Control Technique -- 7. Skewed Effect of the Pressure-Arch in a Double-Arch Tunnel -- References -- Further Reading -- 5. Slope Engineering --