یکی از شیوههای نوین مهار سازههای فولادی استفاده از مهاربندهای کمانش ناپذیر در سیستم جانبی این سازهها میباشد که اخیرا مورد توجه قرار گرفته است .تحقیق حاضر به مطالعه رفتار مهاربندهای کمانش ناپذیر میپردازد که در بخش اول این تحقیق، مقایسهای بین پارامترهایی از قبیل مقادیر انرژی و حداکثر جابجایی طبقات و حداکثر تنش ایجاد شده در سازه برای قابهای سه بعدی۳ ،۶ ، ۹ و ۱۲ طبقه دارای حالات مهاربندی قطری و K در قالب اعمال شتابنگاشتهای زلزلههای طبس و Elcentro و Loma Prieta و انجام تحلیل تاریخچه زمانی، صورت گرفته است و در بخش دوم نیز مقادیر شکلپذیری مهاربندهای کمانش ناپذیر برای قابهای دو بعدی۳ ،۶ ، ۹ و ۱۲ طبقه با حالات قرارگیری مهاربندها بصورتهای قطری،X ، V معکوس و K با انجام تحلیل استاتیکی افزاینده غیرخطی تعیین شده است .تحقیقات اخیر بیانگر این واقعیت است که شکلپذیری مهاربندها به عوامل مختلفی بستگی دارد و تعیین دقیق این پارامتر مستلزم انجام پژوهشهای گسترده میباشد .در این تحقیق تأثیر ارتفاع سازه و نوع مهاربندی بر شکلپذیری در نظر گرفته شده است .نتایج نشان میدهد که در قابهای دو بعدی، با افزایش ارتفاع سازه، شکلپذیری افزایش مییابد .همچنین حالت مهاربندی V معکوس، در تمامی حالات بیشترین مقدار شکلپذیری را دارا میباشد و پس از آن به ترتیب حالات مهاربندی X و K و قطری قرار میگیرند .بهجز سازه ۳ طبقه که در آن مقدار شکلپذیری در حالت مهاربندی قطری اندکی از مقدار شکلپذیری در حالت K بیشتر میباشد .در قابهای سه بعدی، حداکثر تنش ایجاد شده در سازه و جابجایی طبقات در حالت مهاربندیK ، بیشتر از حداکثر تنش ایجاد شده و جابجایی طبقات در حالت مهاربندی قطری میباشد
متن يادداشت
One of the modern methods of inhibition of steel structures is using of buckling restrained braces in the system of integral side structures, which has recently been considered.resent research pays to study and compare the behavior of buckling restrained braces and usual braces.In the first part of this study, a comparison between parameters such as energy absorption and stories displacement and the maximum stress in the structure for 3D frames 3, 6, 9 and 12 story with buckling restrained brace systems for two brace arrangement such as diagonal and K bracing in the tabas and Elcentro and Loma Prieta accelerograms earthquakes and time - history analysis has been done.In the second part, ductility of buckling restrained braces for 2D frames 3 , 6 , 9 and 12 story with the diagonal and X and K and invert V bracing placement and with pushover nonlinear static analysis is determined.Recent research indicates the fact that ductility of braces depends on many factors and accurate determination of this parameter requires extensive research to done. In this study the effect of the structure height and type of bracing effect on the ductility is consideredResults show that in the 2D frames, with increasing on the height of structures, ductility increases. Also, the second type of bracing in all states, have the highest ductility and then third and fourth and first type of bracing respectively are. Except for three story structure in which the ductility of the fourth bracing type is slightly higher than the amount of ductility in first bracing type.In the 3D frames, in general, story displacement and maximum stress in the structures of the K bracing for the buckling restrained brace system is higher than the structures with the diagonal bracing type
موضوع (اسم عام یاعبارت اسمی عام)
موضوع مستند نشده
Buckling Restrained Braces
موضوع مستند نشده
Ductility
موضوع مستند نشده
Time - History analysis
موضوع مستند نشده
Nonlinear Static Pushover Analysis
موضوع مستند نشده
Ultimate Displacement
موضوع مستند نشده
Maximum stress
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )