Optimization of Computed Tomography Calibration Curve for Proton Therapy Treatment Planning
نام عام مواد
[Thesis]
نام نخستين پديدآور
Ghasemi Ghonchehnazi, Maryam
نام ساير پديدآوران
Shang, Charles
وضعیت نشر و پخش و غیره
نام ناشر، پخش کننده و غيره
Florida Atlantic University
تاریخ نشرو بخش و غیره
2019
يادداشت کلی
متن يادداشت
60 p.
یادداشتهای مربوط به پایان نامه ها
جزئيات پايان نامه و نوع درجه آن
M.S.
کسي که مدرک را اعطا کرده
Florida Atlantic University
امتياز متن
2019
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
The accuracy of proton dose computation in the treatment planning system relies on the conversion from the Hounsfield units (HU) of each voxel in the patient CT scan to the proton stopping power ratio (SPR). The aim of this study is to investigate the potential improvement in determining proton SPR using single energy computed tomography (SECT) to reduce the uncertainty in predicting the proton range in patients. Factors which may cause CT number variations in the calibration curve have been examined. The HU-SPR calibration curve was determined based on HU of human body tissues using the stoichiometric method. The uncertainties in SPR were divided into two major categories: The inherent uncertainty, and the CT number uncertainty. The root mean square errors of the inherent uncertainties were estimated 0.02%, 0.61% and 0.26% for lung tissues, soft tissues (excluding Thyroid), and bone tissues, respectively. The total uncertainties due to the inherent uncertainty and CT imaging errors were estimated 1.50%. The average calibration curve of two sized phantoms (head and body) were used in the treatment planning system to mitigate beam hardening effect through the attenuating media. A higher accuracy of the SPR prediction using the stoichiometric method is suggested through comparison with the predicted SPRs that derived from the direct calibration approach.
اصطلاحهای موضوعی کنترل نشده
اصطلاح موضوعی
Applied physics
اصطلاح موضوعی
Nuclear physics
اصطلاح موضوعی
Physics
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )