Design and Performance Evaluation of Building Integrated Solar Technology for Greywater Recycling and Thermal Gain
نام عام مواد
[Thesis]
نام نخستين پديدآور
Kagey, Henry
نام ساير پديدآوران
Hermanowicz, Slawomir W
وضعیت نشر و پخش و غیره
تاریخ نشرو بخش و غیره
2019
یادداشتهای مربوط به پایان نامه ها
کسي که مدرک را اعطا کرده
Hermanowicz, Slawomir W
امتياز متن
2019
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
Developing sustainable building technologies to confront the growing pressure of essential resource scarcity is an important task for civil and environmental engineers in the 21st century. This dissertation describes the design, experimentation, and performance modeling of a multi-physics, building integrated, solar-powered panel system for on-site greywater recycling and thermal gain for interior climate conditioning. The hybrid CORE (Cylindrical Optical Reactive Cylinders) panel type is novel in itself, using wave-guides to support titania photocatalyst and distribute UV light for inactivation and mineralization of contaminants, which has not been studied to date, particularly in a multi-scale format. Several research directions are detailed, from determining the potential for interception mechanics in the cylinder bank of waveguides, to the use of mathematical optimization for performance analysis. In chapter II, Finite Element Analysis on the micro-scale is used to develop a new correlation for particle capture of cylinder banks in non-creeping laminar flow. In chapter III laboratory experimentation on a CORE prototype is detailed in order to estimate reaction rates under solar conditions and determine the efficacy of the optical waveguides for stimulating mass transfer in a turbid medium. In chapter IV the NSGA-II algorithm for multi-objective optimization is employed to assess the influence of multiple parameters on the mass and heat transfer performance of the panel. A novel correlation for particle interception in cylinder banks at moderate flow is given, as well as a simplifying rule of thumb for engineering design purposes. However, it is also shown that particle interception does not contribute meaningfully to disinfection in the CORE panel. The reaction rate for the CORE panel type is determined in the lab: the results show pseudo-zero order kinetics and an over all slow reaction proportional to the Reynolds number on the order of 1e-4. A correlation for reaction potential of individual cylinders developed via Chilton- Colburn analogy from Žukauskas' work on heat transfer in cylinder banks is shown to compare well with the experimental results, matching exactly at Re 350. It is also shown that the photocatalytic response is predominantly due to the effect of waveguide UV transmission. The performance evaluation of the CORE panel in the pilot scale simulation in Berkeley, CA. using the NSGA-II genetic algorithm for the multi-objective studies on efficiency and output showed tendency for maximizing cylinder diameter and thus solid fraction, tilt generally pushed towards a 45 tilt from the vertical, and that CORE could function with a relatively thin over all profile of about 5cm. The maximum daily output of recycled greywater for a 1m2 panel over a year was 87L, a relevant contribution to reuse of an individual's daily grey water production. The panel system functions best as building added system on the roof, but could function as building integrated with specific modifications to the catalyst to increase photosensitization. Further research is required in the direction of multi-parameter optimization both to incorporate more parameters and design constraints (such as the effect of flow rate and solid fraction on energy return) and as a design tool to estimate context dependent design requirements.
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )