عنوان

Advances in Cryogenic Engineering

شابک

9781475705379

شابک

9781475705393

شماره

b403754

عنوان اصلي

Advances in Cryogenic Engineering

نام عام مواد

[Book]

ساير اطلاعات عنواني

Proceedings of the 1959 Cryogenic Engineering Conference University of California, Berkeley, California September 2-4, 1959 /

نام نخستين پديدآور

edited by K. D. Timmerhaus.

محل نشرو پخش و غیره

Boston, MA :

نام ناشر، پخش کننده و غيره

Imprint: Springer,

تاریخ نشرو بخش و غیره

1960.

عنوان فروست

Advances in Cryogenic Engineering,

مشخصه جلد

5

شاپا ي ISSN فروست

0065-2482 ;

متن يادداشت

Applications and Techniques -- A-0 Cryogenic Engineering Advances in the Space Age -- A-1 Air Core Cryogenic Magnet Coils for Fusion Research and High-Energy Nuclear Physics Applications -- A-2 Design of Large Cryogenic Magnet Coils -- A-3 Cryogenic Experience with the 72-Inch Bubble Chamber -- A-4 Large-Scale Production, Handling, and Storage of Liquid Hydrogen -- A-5 A Study of the Hazards in the Storage and Handling of Liquid Hydrogen -- A-6 Test Equipment and Procedures Used in the Development of Liquid Oxygen-Hydrogen Rocket Engines -- A-7 Practical Storage and Distribution of Liquid Hydrogen and Helium -- Missile Technology -- B-1 Handling Liquid Fluorine in Rocket Applications -- B-2 Handling Liquid Hydrogen on a Pilot-Plant Scale -- B-3 Cryogenic Tankage for Space Flight Applications -- B-4 Transfer of Liquid Hydrogen through Uninsulated Lines -- B-5 Flexibility Considerations for the Design of Cryogenic Transfer Lines -- B-6 Facilities for Testing Rocket Engine Components Using Cryogenic Fluids as Propellants -- Insulation -- C-1 Externally Bonded and Sealed Insulation for Liquid-Hydrogen-Fueled Rocket Tanks -- C-2 Flat Panel Vacuum Thermal Insulation and the Super-Dewar Flask -- C-3 Metal Powder Additives in Evacuated-Powder Insulation -- C-4 Effect of Condensation on Conventionally Insulated Cryogenic Tanks -- C-5 A Study of Condensing-Vacuum Insulation -- C-6 Low-Temperature Insulating Systems -- Superinsulation -- D-1 Development of High-Efficiency Insulation -- D-2 Multiple-Layer Insulation -- D-3 Engineering Aspects of Heat Transfer in Multilayer Reflective Insulation and Performance of NRC Insulation -- D-4 Characteristics and Applications of Some Superinsulations -- D-5 Cryogenic Insulation Development -- Heat Transfer -- E-1 Heat Transfer to Helium II for Big Differences of Temperature between Heated Wall and Superfluid Helium Bath -- E-2 Transient Phenomena Associated with the Pressurization of Liquid Nitrogen Boiling at Constant Heat Flux -- E-3 Recent Developments of the Reversing Exchanger -- E-4 Design, Construction, and Testing of a Helium-to-Hydrogen Heat Exchanger -- E-5 Boiling Heat Transfer to Liquid Hydrogen from Flat Surfaces -- E-6 Nucleate- and Film-Boiling Studies with Liquid Hydrogen -- Design and Application -- F-1 On the Evacuation of Plastic Foams to Reduce Their Thermal Conductivity -- F-2 The Venturi Tube as a Liquefied-Gas Flow Measuring Device -- F-3 High-Pressure Liquid-Hydrogen and -Helium Pumps -- F-4 A Volumetric Flowmeter for Liquid Oxygen -- F-5 Results of Flowmeter Calibration in Liquid Hydrogen -- F-6 Crew Compartment Environmental Control Utilizing Cryogenic Fluids -- Liquefaction and Refrigeration -- G-1 A Closed Infrared Detector Cooling System -- G-2 Miniature Joule-Thomson Refrigeration Systems -- G-3 Continuous Refrigeration between 4.2 and 1°K -- G-4 The Liquefaction of Natural Gas -- G-5 Design, Construction, and Performance of a Laboratory-Size Helium Liquefier -- G-6 A New Low-Temperature Gas Expansion Cycle: Part I -- G-6 A New Low-Temperature Gas Expansion Cycle: Part II -- Mechanical Properties -- H-1 The Strength of Ten Structural Adhesives at Temperatures Down to -424° F -- H-2 The Behavior of High-Magnesium-Content Aluminum Alloys at Room and Liquid-Nitrogen Temperatures -- H-3 Some Mechanical Properties of Magnesium Alloys at Low Temperatures -- H-4 Mechanical Properties of High-Strength 301 Stainless Steel Sheet at 70, -320, and -423° F in the Base Metal and Welded Joint Configurations -- H-5 The Low-Temperature Mechanical Properties of Some Selected Austenitic Manganese Steels -- H-6 The Tensile and Impact Properties of Plate and Welds of Aluminum Alloy 5083-H113 between 75 and -320°F -- Fluid Phenomena -- J-1 Single-Phase Flow Tests with Liquid Hydrogen -- J-2 Gas-Pressurized Transfer of Liquid Hydrogen -- J-3 A Survey of Stratification in a Cryogenic Liquid -- J-4 Transient Phenomena Associated with the Pressurized Discharge of a Cryogenic Liquid from a Closed Vessel -- J-5 Pressure-Temperature Histories of Liquid Hydrogen under Pressurization and Venting Conditions -- J-6 An Experimental Study Concerning the Pressurization and Stratification of Liquid Hydrogen -- J-7 Temperature Distribution in Liquid and Vapor Phases of Helium in Cylindrical Dewars -- J-8 Measuring Vapor-Liquid Ratios during Flow by a Capacitance Method -- Processes and Data -- K-1 A Kinetics Study of Ortho-Para Hydrogen Conversion -- K-2 Refrigeration Below -100° C -- K-3 Effective Density of Boiling Liquid Oxygen -- K-4 Maximum-Rate Theory of Impact Sensitivity -- K-5 Composition and Analysis of Commercial Liquid Oxygen -- K-6 Experimental Large-Scale Equipment for Low-Temperature Distillation Tray Studies -- K-7 A Compilation and Correlation of the P-V-T Data of Normal Hydrogen from Saturated Liquid to 80° K -- K-8 The Cryogenic Data Center -- Additional Papers -- L-1 An Improved dc Power Regulator -- L-2 Vacuum Gaskets for Use at 20° K -- Author Index.

بدون عنوان

0

شماره استاندارد بين المللي کتاب و موسيقي

9781475705393

عنوان

Springer eBooks

موضوع مستند نشده

Science (General).

مستند نام اشخاص تاييد نشده

Timmerhaus, K. D.

مستند نام تنالگان تاييد نشده

SpringerLink (Online service)

تاريخ عمليات

20190301073500.0

نام الکترونيکي

نوع ماده

[Book]

تكميل شده

Y