بررسی بهینه سازی حذف اکسایشی گاز CO در نور مرئی با استفاده از کاتالیست های پروسکیتی نانوساختار بر پایه زئولیت های طبیعی
Parallel Title Proper
Investigation of optimization of oxidative removal of CO gas in visible light using nanostructured perovscite catalyst based on natural zeolits
First Statement of Responsibility
/آرزو نجفدخت
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: شیمی
Date of Publication, Distribution, etc.
، ۱۳۹۷
Name of Manufacturer
، میرزائی
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۱۱۰ص
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی - الکترونیکی
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
علوم و فناوری نانو( نانوشیمی)
Date of degree
۱۳۹۷/۱۱/۱۸
Body granting the degree
تبریز
SUMMARY OR ABSTRACT
Text of Note
مونوکسیدکربن یک گاز بیبو، بیرنگ و بیطعم است .که براثر ناقص سوختن کربن به وجود میآید .آلاینده گازی CO گونهای از گازهای خطرناک در میان گازهای خروجی از اگزوز وسایل نقلیه، نیروگاههای صنایع زغالسنگ و معدن، راکتور کارخانههای ذوب و غیره میباشد .که به دلیل میل ترکیبی بسیار بالای آن با هموگلوبین خون) تقریبا ۲۲۰ برابر اکسیژن (بسیار خطرناک است و همچنین باعث آسیب دیدن پوشش گیاهی، موجودات آبزی در اثر واکنش فوتوشیمیایی و درنتیجه دود مضر خطرناک و بارانهای اسیدی میشود .روشهای مختلفی برای حذف این ترکیبات وجود دارد که از میان آنها روشهای اکسایش پیشرفته تحول زیادی را در این زمینه به وجود آورده است .اکسیدهای فلزی مختلط که ترکیبات اکسیژندار دو یا چند فلزی با نسبت مشخص میباشند .به دلیل خواص اکسایش-کاهش و تحرک بالای اکسیژن سطحی، به عنوان نسل جدیدی از کاتالیستهای نانو ساختار فعال در فرایند اکسایش-کاهش در نظر گرفته میشوند .فوتوکاتالیستها شرایط ملایمتری با انرژی پایین بخصوص در حضور نور خورشید یا سایر انرژیهای نوری قابلدسترس به دست میدهند .کاتالیستها و نوع پایهی به کار رفته نقش مهمی در فرآیند حذف اکسایشی مونوکسید کربن دارد به گونهای که یافتن کاتالیستها با کارایی و انتخابگری بالا، با فعالیت در گستره وسیعی از دماها با طول عمر زیاد و قیمت مناسب توجه بسیاری را به خود معطوف ساخته است .در این کار پژوهشی از فوتوکاتالیستهای پروسکیتیxO۳- LaMnxNi۱،y)O۳ +(x- LaMnxCryNi۱بر روی پایههای زئولیت کلینوپتیلولیت و زئولیت A۴ و TiO۲ وگرافن اکسید وAl۲O۳ - با قابلیت فعالیت در نورمرئی استفاده میشود .این فتوکاتالیستها به روش سل-ژل خود احتراقی تهیه شدند و در ادامه مطالعات میزان حذف گازCO درفوتوراکتور ناپیوسته به وسیله دستگاه کروماتوگرافی گازی (GC) بررسی شد .در ادامه ویژگی اکسیدهای فلزی مختلط سنتز شده به روشهای XRD و SEMوEDX تعیین شد .هدف از انجام این پروژه حذف حداکثری گازCO در حداقل زمان ممکن و با حداقل انرژی است .و درادامه فرایند بهینه سازی شد تا مقدار بهینه در طراحی آزمایش ها حاصل گردد .سپس تاثیر پارامترهای مختلف از قبیل :افزایش دما، تعداد لام، میزان رطوبت، دور فن بررسی شد
Text of Note
Carbon monoxide is an odorless, colorless and tasteless gas that creates due to incomplete carbon combustion. CO gaseous pollutant is a kind of dangerous gases among vehicles exhaust gases, coal and mine power plants, reactors for melting plants and so on that due to the high combination trend with blood hemoglobin (approximately 220 times oxygen) is very dangerous. Also it caused to damage to vegetation, aquatic organisms through photochemical reactions and dangerous harmful smoke and acid rains. There are different methods for removing of these combinations that among them advanced oxidation methods has created considerable transition in this field. Mixed metal oxides, which are two or multi-metal oxygenated compounds with special ratio, are considered as a new generation of active nanostructured catalysts in the oxidation-reduction process. Photocatalysts provide more refined conditions with low-energy, especially in the presence of sunlight or other available light-emitting energies. The catalyst and type of the used base plays an important role in the oxidative removal process of carbon monoxide so that finding of catalyst with high efficiency and selectivity with high shelf life and affordable prices at wide temperature range has been attracted many attention. In this research work, LaMnxNi1-xO3 and LaMnxCryNi1-(x + y)O3 provskite photocatalysts are used on the basis of zeolite clinopitolite, zeolite 4A, TiO2, graphene oxide and Al2O3- with activity in the visible light. These photocatalysts were prepared by self-combustion sol-gel and in the following studies, the amount of CO removal in the discontinuous photoreactor was investigated by gas chromatography device (GC). After that the features of synthesized mixed metal oxides was determined by SEM and XRD methods. The goal of this project is to the maximum remove of CO gas in the least possible time and with minimal energy. And in the process, the process was optimized to provide optimal value for the design of the experiments. Then, the effect of different parameters such as temperature rise, lame numbers, humidity rate, and stirrer speed was investigated
PARALLEL TITLE PROPER
Parallel Title
Investigation of optimization of oxidative removal of CO gas in visible light using nanostructured perovscite catalyst based on natural zeolits