سامانه جمع آوری ومدیریت اطلاعات مبتنی برپروتکل هارت بی سیم
First Statement of Responsibility
سیدداود عبداله زاده
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
دانشگاه شهیدچمران اهواز، پردیس دانشگاهی، دانشکده مهندسی، گروه برق
Date of Publication, Distribution, etc.
۱۳۹۶
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۹۸ص.
Accompanying Material
همراه سی دی
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی برق (الکترونیک)
Date of degree
۱۳۹۶/۰۶/۱۰
SUMMARY OR ABSTRACT
Text of Note
نام خانوادگي : عبداله زاده نام: سیدداودشماره دانشجويي :9255539238عنوان پايان نامه : سامانه جمع آوری ومدیریت اطلاعات مبتنی برپروتکل هارت بی سیماستاد راهنما:دکترهومان کعبیاستاد مشاور:دکترابراهیم فرشیدیدرجه تحصيلي:کارشناسی ارشدرشته:برقگرايش:الکترونیکدانشگاه :شهیدچمران اهوازدانشكده:مهندسیگروه :برقتاريخ فارغ التحصيلي : تعداد صفحه:كليد واژه ها:شبکه های حسگر بی سیم،وایرلس هارتIEEE 802.15.4, بدون شک یکی از مهمترین موضوعاتی که در چند سال اخیر جهت ارسال داده در صنعت مطرح شده بحث ارتباط بی سیم است. درواقع WirelessHART جدیدترین ویرایش HART است که دسترسی آسان وایمن به داده ها را بدون هزینه های کابل کشی فراهم می سازد.دراین پایان نامه هدف ساخت یک دستگاه گیرنده بی سیم صنعتی مبتنی برپروتکل هارت بود که جهت انجام یک پروژه کاملاصنعتی ازتراشهLTP5901-WHM ومیکروLPC1768استفاده شد. تلاشهای زیادی جهت برقراری ارتباط میان دوماژول فرستنده وگیرنده صورت گرفت وبالاخره برقرای ارتباط وسپس برنامه نویسی آن انجام شد. بوسیله رابط JTAGبرنامه نویسی میکرونیزانجام وپایه های دیجیتال وآنالوگ ورودی وخروجی مشخص شدند.ماژول مورد نظر جهت برقراری ارتباط API با هر میکروپروسسوری از پروتکل HDLC استفاده می نماید. قالب تمامی داده ها در این پروتکل براساس RFC1662 کد می شود.تنهاچالش روبروکدتشخیص خطای FCSبودکه مانعی جهت تکمیل کامل کارگردید.نتیجه بدست آمده واقعاامیدوارکننده بودچون ایجادارتباط با ماژول ومیکرو وبرنامه نویسی هرکدام از آنهادرداخل کشورانجام گردیدودرصورت تکمیل پروژه کاربزرگی جهت بومی سازی این تجهیزات پرکاربردوگران قیمت انجام خواهدشد.
Text of Note
Name :seyeddavod Surname:abdollahzadeh Title : WirelessHART Field Communicator and Manager Supervisor/s: Dr. Homan Kaebi Advisor/s: Dr. Ebrahim Farshidi Degree: Master Degree University: shahid chamran university Department : Electrical EngineeringFaculty: Faculty of Engineering Graduating Date: Number of Pages:Keywords : WirelessHART, IEEE 802.15.4, wireless sensor network Abstract:Undoubtedly, one of the most important issues that has been raised in the industry over the past few years is wireless communication. In fact, WirelessHART is the latest HART editing, which provides easy access to data without cabling costs. The purpose of this thesis was to build an industrial wireless receiver based on the Hart Protocol. Which was used to carry out an industrial project of LTP5901-WHM and MICRO LPC1768. Many attempts were made to communicate between transmitter and receiver and Finally, the connection and programming followed. The JTAG interface was characterized by micronization programming , digital and analogue input and output formats. The module for communicating APIs to any microprocessor uses the HDLC protocol. The format of all data in this protocol is based on RFC1662. The single-faced problem was the fault detection of the FCS fault, Which prevented the complete completion of the task. The result was really promising Because communication with the module and micro-programming and programming of each of them was carried out within the country and if the project is completed, the localization of these high-end equipment will be done.