اتصال ستون فلزی به صفحه پای ستون یکی از اتصالات مهم در سازههای فولادی است .این اتصال در طراحی، گیردار یا مفصل کامل فرض میشود .رفتار واقعی این نوع اتصالات نیمه صلب است .در این پایانصنامه با استفاده از روش اجزای محدود و نرمافزارABAQUS ، تأثیر عواملی مانند ضخامت صفحه ستون، تعداد، قطر و آرایش میلمهارها، ابعاد لچکیها و بار محوری ستون بر گیرداری اتصال پای ستون، سختی دورانی اولیه و مقاومت نهایی خمشی ابتدا تحت بارگذاری یکنواخت و سپس چرخهای بررسی شد .طبق این پژوهش، رفتار اتصال نیمهصلب ارزیابی شد و تغییر در تعداد و آرایش میلمهارها نسبت به تغییرات سایر پارامترها بر رفتار چرخهای اتصال و به طور خاص بر مقدار مقاومت نهایی، سختی دورانی اولیه و مدول گیرداری اتصال، تأثیر بیشتری از خود نشان داد .سپس با استفاده از نرمافزار MATLAB برنامهای به منظور دستیابی به نحوه توزیع تنش زیر کفستون نوشته شد و شکل توزیع تنش زیر کفستون بر خلاف فرض توزیع تنش مستطیلی، به صورت سهمیگون نمایان شد
Steel column connection to column base plate is one of the primary connections in steel structures. This connection is assumed completely pinned or fully-rigid in design. Behavior of this connection is semi-rigid in reality. Using a commercial finite element software namely ABAQUS, the effect of different parameters such as thickness of the base plate, number, diameter and arrangement of anchor bolts, gusset dimensions and value of the axial load on rigidity of the connection, initial rotational stiffness and ultimate bending capacity is studied both for monotonic and cyclic loading patterns. Based on results, the effect of number and arrangement of anchor bolts significantly affects the ultimate load, initial rotational capacity and rigidity of the connection in hysteresis loading in comparison to other parameters. Subsequently, MATLAB software is used to obtain the stress distribution at the underside of the base plate. Surprisingly, a parabolic stress distribution was observed as opposed to commonly held rectangular distribution