طراحی و ساخت کربن فعال مغناطیسی عامل دار از هسته زیتون برای حذف فنول از فاضلاب صنعتی
[پایاننامه]
Design and construction of the functionalized magnetic activated carbon for removal of phenol from industrial wastewater
/فاطمه خرم
: مهندسی شیمی
، ۱۳۹۸
۱۰۱ص.
:
زبان: فارسی
زبان چکیده: فارسی
چاپی - الکترونیکی
مصور، جدول، نمودار
کارشناسی ارشد
مهندسی شیمی- محیط زیست
۱۳۹۸/۱۱/۰۱
صنعتی سهند
در پژوهش حاضر، جاذب مغناطیسی بر پایه کربن فعال ساخته شده از هسته زیتون به عنوان پسماند کشاورزی در دسترس، به روش فعالسازی شیمیایی با فعالسازهای مختلف از جمله اسید فسفریک، هیدروکسید پتاسیم و کلرید روی تحت اتمسفر گاز نیتروژن در کوره استوانهای انجام گرفت .جاذبهای سنتز شده جهت حذف آلایندههای فنول و متیلن بلو مورد آزمایش قرار گرفت .طبق نتایج به دست آمده بین جاذبهای سنتز شده، جاذب فعالسازی شده با کلرید روی بیشترین قدرت جذب برای حذف فنول و متیلنبلو از خود نشان داد .این جاذب جهت مغناطیسی کردن و عاملدار شدن انتخاب شد .برای عاملدار شدن سطح کربن فعال با به کارگیری محلول اوره و همچنین روشهای مختلف سنتز انجام شد .اما در هیچ یک از موارد تاثیر قابل ملاحظهای مشاهده نشد .در ادامه برای جداسازی آسان نانو جاذبها از محلول فرآیند روش همرسوبی با هیدرازین برای سنتز نانو جاذبهای مغناطیسی به کار گرفته شد .آنالیزهای ساختار شناسی مختلفی شاملXRD ،BET ،IR- FT،VSM ،TEM ، TGA و FESEM برای مطالعه ساختار نمونههای سنتز شده مورد ارزیابی قرار گرفتند .نتایج آزمونهای ساختار شناسی بیانگر توزیع مناسب نانو ذرات کامپوزیت هسته-پوسته کربن فعال مغناطیسی با اندازهای کمتر از ۳۰ نانومتر بودهاند .همچنین آنالیز VSM قدرت مغناطیسی مناسب نانو کامپوزیتهای هسته-پوسته سنتز شده را در حدودemu/g ۲۸/۳۲ نشان داد .سطح فعال نمونههای کربن فعال غیر مغناطیسی و کربن فعال مغناطیسی به ترتیب ۶۲۲/۸۵ و ۴۷۲/۰۴ متر مربع بر گرم با بهکارگیری آنالیز BET گزارش شد .با استفاده از ایزوترم لانگمویر حداکثر ظرفیت جذب جاذب سنتز شده برای حذف آنیون فنول ۳۹/۱۹ و کاتیون متیلن بلو ۲۱۰ میلیگرم بر گرم بود که با توجه به مراجع موجود و قابل دسترس برای حذف فنول، مقدار قابل ملاحظهای بود که قابلیت رقابت با جاذبهای سنتز شده تاکنون را دارد .در ضمن مطالعات سینتیکی نشان داد که رفتار سینیتیکی جاذبهای سنتز شده برای حذف آلایندههای ذکر شده از مدل شبه درجه دوم پیروی میکند که نشان دهنده جذب سطحی فیزیکی الکتروستاتیکی بوده است.
In the present study, magnetic adsorbents based on activated carbon made from olive kernels as available agricultural wastes were chemically activated by various activators such as phosphoric acid, potassium hydroxide and zinc chloride under atmospheric nitrogen gas in a Tiopi furnace. The synthesized adsorbents were tested to remove phenol and methylene blue. According to the results obtained between the synthesized adsorbents, the zinc chloride activated adsorbent showed the highest adsorption capacity for the removal of phenol and methylene blue. This adsorbent was then selected to magnetize and functionalize. To make the activated carbon surface operational, urea solution was used as well as different methods of synthesis. But in no case was there a significant effect. Subsequently, for easy separation of the nanosorbents from the cohesive process solution, hydrazine was synthesized for magnetic nanosorbent synthesis. Different structural analyzes including XRD, BET, FT-IR, VSM, TEM, TGA and FESEM were evaluated to study the structure of the synthesized samples. The XRD, FESEM, and BET structural results indicate the proper distribution of the formed iron oxide crystals on the surface of the activated carbon and indicate magnetic particle size less than 30 nm. The VSM analysis also proved the appropriate magnetic strength of the synthesized adsorbent, which is 28.32 emu/g. The active levels of ACZ and MACZ were reported 622.85 and 472.04 m2/g, respectively, using BET analysis.
ba
Design and construction of the functionalized magnetic activated carbon for removal of phenol from industrial wastewater
کربن فعال
نانو جاذب مغناطیسی
جذب سطحی
فنول
هسته زیتون
Activated Carbon, Nano-magnetic Adsorbent, Adsorption, Phenol, Olive Stone