عنوان
پدید آورنده
موضوع
رده
کتابخانه
محل استقرار
شماره کتابشناسی ملی
شماره
TLpq2457959260
زبان اثر
زبان متن نوشتاري يا گفتاري و مانند آن
انگلیسی
عنوان و نام پديدآور
عنوان اصلي
Magnetically Tuned 3D-Printed Antenna Arrays
نام عام مواد
[Thesis]
نام نخستين پديدآور
Alhassoon, Khaled A.
نام ساير پديدآوران
Daryoush, Afshin
وضعیت نشر و پخش و غیره
نام ناشر، پخش کننده و غيره
Drexel University
تاریخ نشرو بخش و غیره
2020
مشخصات ظاهری
نام خاص و کميت اثر
283
یادداشتهای مربوط به پایان نامه ها
جزئيات پايان نامه و نوع درجه آن
Ph.D.
کسي که مدرک را اعطا کرده
Drexel University
امتياز متن
2020
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
3D additive printing technology has been employed recently for manufacturing of a wide variety of radio frequency (RF) circuits; particularly it is very attractive for composite manufactured structures in conformal (non-planar) shapes, such as magnetically tuned antenna arrays for both civilian and military applications. Low cost 3D additive printing of ferromagnetic materials and its tuning using applied external magnetic field eliminates the loading effects of electrical control on the antenna radiation pattern. Composite substrates using low-loss dielectric material filaments Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) combined with ferromagnetic nanoparticle powders (FeCo, NiFe2O4, and ZnFe2O4) and metallic microstrip traces (copper and Ti3C2Tx as 2D MXene) is used to realize magnetically tuned radiating elements. Design modeling of 3D printed magnetically tuned antennas depends on accurate RF properties of 3D printed composite substrates in term of complex permittivity, complex permeability, and metal conductivity. Primary efforts are made by extracting RF characteristics of composite substrate in terms of filling factor (10% - 100%), printing patterns (rectilinear, triangular, ...), and metallic layer thicknesses. Accurate extractions are presented using curve fitting of simulated to measured scattering parameters of custom designed circuits. The extraction was performed over broadband (1-10GHz) using microstrip transmission line (TL) and narrowband using annular ring resonator (ARR) (2.4GHz and 5.4GHz) and metallic cavity resonator (2.4GHz). A statistical analysis of three samples of each category is performed to have an accurate extraction process. According to our extraction, the ABS filament had lower loss tangent than PLA. The complex permittivity of ABS filaments with triangular pattern and 10% infill had an average value of 1.3 6
موضوع (اسم عام یاعبارت اسمی عام)
موضوع مستند نشده
Electrical engineering
موضوع مستند نشده
Electromagnetics
موضوع مستند نشده
Materials science
موضوع مستند نشده
Nanotechnology
موضوع مستند نشده
Operations research
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )
مستند نام اشخاص تاييد نشده
Alhassoon, Khaled A.
مستند نام اشخاص تاييد نشده
Daryoush, Afshin
دسترسی و محل الکترونیکی
نام الکترونيکي
مطالعه متن کتاب وضعیت انتشار
فرمت انتشار
p
اطلاعات رکورد کتابشناسی
نوع ماده
[Thesis]
کد کاربرگه
276903
اطلاعات دسترسی رکورد
سطح دسترسي
a
تكميل شده
Y
