عنوان

Simulations for design and manufacturing :

شابک

9789811085185

شابک

9811085188

شابک اشتباه

9789811085178

شابک اشتباه

981108517X

عنوان اصلي

Simulations for design and manufacturing :

نام عام مواد

[Book]

ساير اطلاعات عنواني

select papers from AIMTDR 2016 /

نام نخستين پديدآور

edited by Uday S. Dixit, Ravi Kant.

محل نشرو پخش و غیره

Singapore :

نام ناشر، پخش کننده و غيره

Springer,

تاریخ نشرو بخش و غیره

2018.

نام خاص و کميت اثر

1 online resource (xxii, 292 pages) :

ساير جزييات

illustrations (some color)

عنوان فروست

Lecture notes on multidisciplinary industrial engineering,

شاپا ي ISSN فروست

2522-5022

متن يادداشت

Intro; Preface; About the AIMTDR Conference; Mission, Vision, Challenges and Direction of AIMTDR Conference; AIMTDR 2016 Conference: Objectives and Organization; Editorial Acknowledgements; Contents; About the Editors; 1 Study on the Delamination of GFRP Composites in Drilling: A Finite Element Model; 1 Introduction; 1.1 Mechanism of Drilling; 1.1.1 Thrust Force; 1.1.2 Torque; 1.1.3 Radial Components of the Cutting Forces; 1.2 Problems Associated with Drilling of FRPs; 1.2.1 Abrasive Tool Wear; 1.2.2 Thermal Softening of Matrix; 1.2.3 Matrix Cracking; 1.2.4 Fiber Pullout; 1.2.5 Fuzzing.

متن يادداشت

1.2.6 Delamination1.3 Delamination Mechanism; 1.3.1 Peel-Up Delamination Mechanism; 1.3.2 Pushout Delamination; 2 Literature Review; 2.1 Experimental Methods; 2.2 Analytical Methods; 2.3 Finite Element Method; 3 Finite Element Formulation; 3.1 Modeling of Twist Drill; 3.2 Workpiece Modeling; 3.3 Material Modeling; 3.3.1 Material Constitutive Relation for the Bulk Material; 3.3.2 Damage Modeling for FRP Composites; Tsai-Hill Criteria; Inter-Ply Failure: Delamination; Constitutive Behavior for Traction-Separation Modeling of Cohesive Zone; 3.4 User Subroutine "VUSDFLD"; 3.5 Mesh Generation.

متن يادداشت

1.5 Effect of Nozzle Position1.6 Experimental Techniques to Determine Droplet Size; 1.6.1 Optical Imaging Analyzers; 1.6.2 Laser Diffraction Analyzers; 1.6.3 Phase-Doppler Particle Analyzers (PDPA); 2 CFD Simulations for MQL Milling; 2.1 Numerical Modeling and Simulation of MQL; 2.2 CAD Model; 2.3 Grid Partitioning and Meshing; 2.3.1 Grid Partitioning; 2.3.2 Boundary Conditions; 2.4 Assumptions; 2.5 CFD Simulation; 2.5.1 Turbulence Model; 2.5.2 Discrete Phase Model (DPM); Governing Equations for DPM; 2.6 MQL Droplet Size Prediction; 2.7 Experimental Validation; 3 Experimentation.

متن يادداشت

3.1 Experimental Setup3.2 Experimental Results; 3.2.1 Effect of Air Pressure; 3.2.2 Effect of Flow Rate; 3.2.3 Effect of Droplet Size; 3.2.4 Effect of Wetting Area; 3.2.5 Micrograph Analysis; 4 Conclusions; References; 3 Finite Element Method and Experimental Study of Self-reacting Friction Stir Welding of Aluminium Alloy AA6061-T6; 1 Introduction; 2 Experimental Procedure; 3 Numerical Model; 3.1 Model Description; 3.2 Material Properties; 3.3 Boundary Conditions; 4 Results and Discussion; 5 Conclusions; References.

متن يادداشت

3.5.1 Mass Scaling Analysis3.6 Interaction and Contact Definition; 3.7 Boundary Conditions and Loads; 4 Results and Discussion; 4.1 Effect of Feed Rate on Thrust Force and Torque; 4.2 Effect of Speed on Thrust Force and Torque; 4.3 Effect of Drill Point Angle on Thrust Force and Torque; 5 Conclusions; References; 2 Computational Fluid Dynamics Analysis of MQL Spray Parameters and Its Influence on MQL Milling of SS304; 1 Introduction; 1.1 Classification of MQL; 1.2 Mist Formation in MQL; 1.3 Effect of Pressure and Flow Rate Over Droplet Size; 1.4 Effect of Droplet Deposition Distance.

بدون عنوان

0

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

متن يادداشت

This book focuses on numerical simulations of manufacturing processes, discussing the use of numerical simulation techniques for design and analysis of the components and the manufacturing systems. Experimental studies on manufacturing processes are costly, time consuming and limited to the facilities available. Numerical simulations can help study the process at a faster rate and for a wide range of process conditions. They also provide good prediction accuracy and deeper insights into the process. The simulation models do not require any pre-simulation, experimental or analytical results, making them highly suitable and widely used for the reliable prediction of process outcomes. The book is based on selected proceedings of AIMTDR 2016. The chapters discuss topics relating to various simulation techniques, such as computational fluid dynamics, heat flow, thermo-mechanical analysis, molecular dynamics, multibody dynamic analysis, and operational modal analysis. These simulation techniques are used to: 1) design the components, 2) to investigate the effect of critical process parameters on the process outcome, 3) to explore the physics of the process, 4) to analyse the feasibility of the process or design, and 5) to optimize the process. A wide range of advanced manufacturing processes are covered, including friction stir welding, electro-discharge machining, electro-chemical machining, magnetic pulse welding, milling with MQL (minimum quantity lubrication), electromagnetic cladding, abrasive flow machining, incremental sheet forming, ultrasonic assisted turning, TIG welding, and laser sintering. This book will be useful to researchers and professional engineers alike.

منبع سفارش / آدرس اشتراک

Springer Nature

شماره انبار

com.springer.onix.9789811085185

عنوان

Simulations for design and manufacturing.

شماره استاندارد بين المللي کتاب و موسيقي

9789811085178

عنوان اصلي به زبان ديگر

AIMTDR 2016

موضوع مستند نشده

Manufacturing processes-- Simulation methods, Congresses.

موضوع مستند نشده

3D graphics & modelling.

موضوع مستند نشده

Manufacturing processes-- Simulation methods.

موضوع مستند نشده

Reliability engineering.

موضوع مستند نشده

TECHNOLOGY & ENGINEERING-- Industrial Engineering.

موضوع مستند نشده

TECHNOLOGY & ENGINEERING-- Industrial Technology.

موضوع مستند نشده

TECHNOLOGY & ENGINEERING-- Manufacturing.

موضوع مستند نشده

TECHNOLOGY & ENGINEERING-- Technical & Manufacturing Industries & Trades.

موضوع مستند نشده

Tool making.

موضوع مستند نشده

TEC-- 009060

موضوع مستند نشده

TEC-- 018000

موضوع مستند نشده

TEC-- 020000

موضوع مستند نشده

TEC-- 040000

موضوع مستند نشده

TGXT

شماره

ويراست

شماره رده

مستند نام اشخاص تاييد نشده

Dixit, Uday S.

مستند نام اشخاص تاييد نشده

Kant, Ravi

مستند نام تنالگان تاييد نشده

All India Manufacturing Technology Design and Research Conference(27th :2016 :, Pune, India)

تاريخ عمليات

20200823222725.0

قواعد فهرست نويسي ( بخش توصيفي )

pn

نام الکترونيکي

نوع ماده

[Book]

تكميل شده

Y