عنوان

Analysis of machine elements using SOLIDWORKS® simulation 2017 /

شابک

1630570753

شابک

9781630570750

عنوان اصلي

Analysis of machine elements using SOLIDWORKS® simulation 2017 /

نام عام مواد

[Book]

نام نخستين پديدآور

John R. Steffen, Shahin S. Nudehi.

محل نشرو پخش و غیره

[Place of publication not identified] :

محل نشرو پخش و غیره

Mission, KS :

نام ناشر، پخش کننده و غيره

Sdc pubns,

نام ناشر، پخش کننده و غيره

SDC Publications,

تاریخ نشرو بخش و غیره

2017.

تاریخ نشرو بخش و غیره

2017.

تاریخ نشرو بخش و غیره

©2017

نام خاص و کميت اثر

1 volume (various pagings) :

ساير جزييات

illustrations ;

ابعاد

28 cm

متن يادداشت

"Based on: SOLIDWORKS® Simulation Premium 2017."

متن يادداشت

Order of authors reversed on cover and spine.

متن يادداشت

Includes bibliographical references and index.

متن يادداشت

Finite Element Analysis -- Nodes, Elements, Degrees of Freedom, and Equations -- SOLIDWORKS Simulation Elements -- Solid Elements -- Solid Element Degrees of Freedom -- Shell Elements -- Shell Elements Degrees of Freedom -- Beam and Truss Elements -- Meshing a Model -- Stress Calculations for Nodes and Elements -- Nodal Stress Values -- Element Stress Values -- Assumptions Applied to Linear Static Finite Element Analysis -- Static Loading -- Linear Material Behavior -- Small Deformations -- Closing Comments -- Introduction to the SOLIDWORKS Simulation User Interface -- Orientation and Set-up of SOLIDWORKS Work Environment -- Customizing the SOLIDWORKS Screen -- Orientation to the SOLIDWORKS Simulation Work Environment -- Property Managers and Dialogue Boxes -- Cautions and Other Facts You Should Know -- Learning Objectives -- Problem Statement -- Creating a Static Stress Analysis (Study) -- Assigning Material to the Model -- Applying Fixtures.

متن يادداشت

Apply Fixtures -- Reduce Model Size Using Symmetry -- Define Symmetry Restraints (Fixtures) -- Apply Fixtures to Eliminate Rigid Body Motion -- Use Contact Sets to Define a Shrink Fit -- Mesh the Model and Run the Solution -- Examination of Results -- Default Stress Plot -- Stress Plots in a Cylindrical Coordinate System -- Tangential (Circumferential or Hoop) Stress -- Radial Stress -- Verification of Results -- Stress Predicted by Classical Interference Fit Equations -- Stress Predicted by Finite Element Analysis -- Radial Stress Comparison -- Tangential Stress Comparison -- Quantifying Radial Displacements -- Generating a Report -- Exercises -- Learning Objectives -- Problem Statement -- Preparing the Model for Analysis -- Add Reference Planes -- Insert Split Lines -- Create the Assembly Model -- Cut Model on Symmetry Plane -- Create a Finite Element Analysis (Study) -- Assign Material Properties -- Assign Fixtures and External Loads.

متن يادداشت

Applying External Loads -- Meshing the Model -- Running the Solution -- Examination of Results -- Understanding Default Graphical Results -- Results Predicted by Classical Stress Equations -- Simulation Results for Stress in Y-Direction -- Using the Probe Tool -- Customizing Graphs -- Summary -- To Save Or Not To Save Files, That is the Question? -- Option 1-Close a File And Save Its Contents Using the Original File Name -- Option 2-Close a File And Save It Contents Using a Different File Name -- Option 3-Close a File without Saving Results -- Option 4-Re-open a SOLIDWORKS Simulation File Saved Using Option 1 or Option 2 -- Exercises -- Learning Objectives -- Problem Statement -- Creating a Static Analysis (Study) -- Setting up the Simulation Toolbar -- Assign Material Properties to the Model -- Applying Fixtures -- Applying External Load(s) -- Inserting Split Lines -- Applying Force to an Area Bounded by Split Lines -- Meshing the Model -- Solution.

متن يادداشت

Complete and Run the Initial Study -- Creating an Optimization Design Study -- Understanding Optimization Design Terminology -- Selecting and Specifying Design Parameters (Variables) -- Define Constraints and their Sensors -- Define the Stress Constraint and Sensor -- Define the Displacement Constraint and Sensor -- Define a Goal and its Sensor -- Overview of Results -- General Observations -- Local Trend Graphs -- Local Trend Graph of the Design Goal versus a Design Variable -- Local Trend Graph of a Constraint versus a Design Variable -- Closing Observations -- Exercises -- Learning Objectives -- Problem Statement -- Create a Buckling Analysis (Fixed-Free End Conditions) -- Assign Material Properties to the Model -- Apply Fixed-Free Fixture End Conditions to the Model -- External Loads -- Buckling Analysis Options -- Meshing the Model -- Solution -- Examination of Results -- Buckling Mode Shapes (Optional) -- Validity of Elastic Buckling Simulation.

متن يادداشت

Create a Buckling Analysis Using Fixed-Fixed End Conditions -- Assign Material Properties to the Model -- Prepare the Model for Assignment of Fixed-Fixed End Conditions -- Assign Fixed-Fixed Fixture to Top End of Model -- External Loads -- Buckling Analysis Options -- Meshing and Running the Model -- Examination of Results -- Validity of Elastic Buckling Simulation -- Create a Buckling Analysis Using Pinned-Pinned End Conditions -- Assign Material Properties to the Model -- Prepare the Model for Assignment of Pinned-Pinned End Conditions -- Pinned-Pinned Fixture -- External Loads -- Meshing and Running the Model -- Examination of Results -- Buckling Mode Shapes -- Validity of Elastic Buckling Simulation -- Create a Buckling Analysis assuming an Eccentrically Loaded Pin with Pinned-Pinned End Conditions -- Pinned-Pinned Fixture -- External Loads -- Meshing and Running the Model -- Examination of Results -- Summary -- Exercises.

متن يادداشت

Examination of Results -- Analysis of von Mises Stresses Within the Model -- Verification of Results -- Results Predicted by Classical Stress Equations -- Comparison with Finite Element Results -- Assessing Safety Factor -- Alternate Stress Display Option -- Determining Reaction Forces -- Is it Significant That the Model is Not in Equilibrium? -- Soft Springs Can Be Applied Where Other Restraints are not Appropriate -- Important Caution Regarding Strength and Safety Factor -- Logging Out of the Current Analysis -- Exercises -- Learning Objectives -- Problem Statement -- Create a Static Analysis (Study) -- Defeaturing the Model -- Assign Material Properties to the Model -- Apply Fixtures and External Loads -- Mesh the Model -- Solution -- Examination of Results -- Stress Plots -- Creating a "Copy" of a Plot -- Displacement Plot -- Creating New Studies -- Basic Parts of the Graphical User Interface.

متن يادداشت

Results Comparison (Tangential Stress = sigma1 on Cylindrical Surface) -- Other Meaningful Results Comparisons -- Guidance for Determining Symmetry Fixtures -- Application of Symmetry Fixtures -- Closing Observations -- Log Out of the Current Analysis -- Thick Wall Pressure Vessel -- Problem Statement -- Defining the Study -- Assign Material Properties -- Define Fixtures and External Loads -- Create a Duplicate Study -- Mesh the Model-Default Size Standard Mesh -- Mesh the Model-Fine Size Standard Mesh -- Solution -- Results Analysis -- Displacement Analysis -- von Mises Stress Analysis -- Tangential Stress Analysis -- Adjusting Stress Magnitude Display Parameters -- Using Section Clipping to Observe Stress Results -- Exercises -- Learning Objectives -- Problem Statement -- Interference Check -- Create a Static Analysis (Study) -- Assign Material Properties to the Model -- SOLIDWORKS Default Connection Definition -- Defeature and Simplify the Model.

متن يادداشت

Study Using High Quality Elements and COARSE Mesh Size -- Study Using High Quality Elements and DEFAULT Mesh Size -- Study Using High Quality Elements and FINE Mesh Size -- Study Using High Quality Elements and MESH CONTROL -- Summary -- Results Analysis -- Create Multiple Viewports -- What Can Be Learned from this Example? -- Other Uses of the Copy Feature -- Solution Convergence -- Comparison of Classical and FEA Results -- Logging Out of the Current Analysis -- Exercises -- Learning Objectives -- Thin-Wall Pressure Vessel (Using Shell Elements) -- Problem Statement -- Understanding System Default Settings -- Creating a Static Analysis Using Shell Elements -- Converting a Solid Model to a Shell Model -- Open a New Simulation Study -- Assign Material Properties -- Define Shell Thickness -- Assign Fixtures and External Loads -- Restraints Applied Using Reference Geometry -- Pressure Load Applied -- Mesh the Model -- Solution -- Results Analysis.

متن يادداشت

Symmetry and Immovable Restraints -- Connections Define Contact Conditions -- Apply a Directional Load -- Mesh the Model and Run the Solution -- Results Analysis -- Von Mises Stress -- Iso Clipping -- Animating Stress Results -- Displacement Results -- Contact Pressure/Stress -- Exercises -- Learning Objectives -- Problem Statement -- Create a Static Analysis (Study) -- Assign Material Properties to the Model -- Apply External Loads and Fixtures -- Traditional Loads and Fixtures -- Define Bolted Joint Restraints -- Define Local Contact Conditions -- Mesh the Model and Run Solution -- Results Analysis for the Downward External Load -- von Mises Stress -- Bolt Forces (for Downward Load) -- Define a New Study with the Applied Force Acting Upward -- Results Analysis for the Upward External Load -- von Mises Stress -- Bolt Forces (for Upward Load) -- Bolt Clamping Pressure -- Summary -- Exercises -- Learning Objectives -- Problem Statement.

بدون عنوان

0

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

بدون عنوان

8

متن يادداشت

"Analysis of Machine Elements Using SOLIDWORKS Simulation 2017 is written primarily for first-time SOLIDWORKS Simulation 2017 users who wish to understand finite element analysis capabilities applicable to stress analysis of mechanical elements. The focus of examples is on problems commonly found in an introductory, undergraduate, Design of Machine Elements or similarly named courses."--Back cover.

موضوع مستند نشده

SolidWorks.

موضوع مستند نشده

SolidWorks.

موضوع مستند نشده

Computer-aided design.

موضوع مستند نشده

Machine design.

موضوع مستند نشده

Computer-aided design.

موضوع مستند نشده

Machine design.

شماره

ويراست

مستند نام اشخاص تاييد نشده

Steffen, John R.

مستند نام اشخاص تاييد نشده

Nudehi, Shahin S.

تاريخ عمليات

20200823051418.0

قواعد فهرست نويسي ( بخش توصيفي )

rda

نام الکترونيکي

نوع ماده

[Book]

تكميل شده

Y