DEMAND RESPONSE AND EXCHANGE POWER, HEAT, AND COOL IN THE GRID-CONNECTED MICROGRIDS
General Material Designation
Dissertation
First Statement of Responsibility
WAJDI KAMIL SUKKAR ALMAGED
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
Electrical and Computer Engineering
Date of Publication, Distribution, etc.
1402
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
77p.
Other Physical Details
cd
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
M.S.
Discipline of degree
ELECTRICAL ENERGY MANAGEMENT
Date of degree
1402/01/30
SUMMARY OR ABSTRACT
Text of Note
Recently, the role of microgrids in grids has been unprecedentedly expanded, especially in the last decade. Hence, planning for microgrids has become an important topic among researchers. Therefore, a new approach of modeling and planning for a grid-connected microgrid is offered in this research. In this regard, a microgrid with CCP, CHP, and CCHP units and some of the most important components, including Gas Turbines (GTs), Heat Boilers (HBs), Heat Exchangers (HXs), Absorption Chillers (ACs), Photovoltaics (PVs), Wind Turbines (WT), batteries, and cooling, thermal, and power loads is assumed. Then, the planning of the microgrid is modeled as an optimization problem and some metaheuristic algorithms, including PSO, GA, and TLBO, are employed to solve it. Finally, the results are analyzed and compared to specify the pros and cons of the different methods. In this respect, PSO is selected as the best method, before GA then TLBO algorithm.
Text of Note
اخیراً نقش ریزشبکه ها در شبکه ها به ویژه در دهه اخیر به طور بی سابقه ای گسترش یافته است. از این رو، برنامه ریزی برای ریزشبکه ها به یک موضوع مهم در میان محققان تبدیل شده است. بنابراین، رویکرد جدیدی از مدلسازی و برنامهریزی برای یک ریزشبکه متصل به شبکه در این تحقیق ارائه شده است. در این راستا، یک ریزشبکه با واحدهای CCP، CHP و CCHP و برخی از مهمترین اجزا از جمله توربینهای گاز (GTs)، دیگهای حرارتی (HBs)، مبدلهای حرارتی (HX)، چیلرهای جذبی (AC)، فتوولتائیک (PV) )، توربین های بادی (WT)، باتری ها و بارهای خنک کننده، حرارتی و قدرتی در نظر گرفته شده است. سپس، برنامهریزی ریزشبکه بهعنوان یک مسئله بهینهسازی مدلسازی میشود و برخی از الگوریتمهای فراابتکاری از جمله PSO، GA و TLBO برای حل آن استفاده میشوند. در نهایت، نتایج تجزیه و تحلیل و مقایسه می شوند تا مزایا و معایب روش های مختلف مشخص شود. از این نظر، PSO به عنوان بهترین روش، قبل از الگوریتم GA و سپس TLBO انتخاب شده است.
OTHER VARIANT TITLES
Variant Title
پاسخگویی بار و تبادل توان، گرما و سرما با شبکه اصلی متصل به ریزشبکه ها