NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
در رشته مهندسی نانوفناوری
Date of degree
۱۳۹۲/۱۰/۲۵
Body granting the degree
تبریز
SUMMARY OR ABSTRACT
Text of Note
در این پایان نامه ابتدا شرح مختصری در مورد فیبر نوری ارائه می شود و سپس اثر تشعشعات پر انرژی بر انواع فیبر نوری مورد بررسی قرار می گیرد.وقتی که فیبرهای نوری در مقابل تشعشع هسته ای وکیهانی واقع می شوند تغییراتی در خواص نوری آنها انجام می گیرد که می تواند موجب افت عملکرد سیستم شود .سیستم های بسیاری از هواپیماها تا تاسیسات زمینی وجود دارند که می توانند از فیبر نوری بهره بگیرند .هر سیستم باید میزان تحمل تابش مشخصی داشته باشد که زیر آن مقدار برای یک حداقل دوره زمانی بتواند به کار خود ادامه دهد .همچنین سیستم هایی وجود دارند که به احتمال زیاد در آینده نزدیک در آنها فیبرهای نوری مورد استفاده قرار گیرند .بنابراین ارزیابی فیبرهای نوری موجود برای کاربردپذیری آنها در سیستم های نظامی و غیره که ممکن است در معرض تابش پرانرژی باشند لازم است .نفوذ تشعشع به داخل مواد نه تنها به خود مواد، بلکه به نوع تشعشع نیز بستگی دارد .تغییرات حاصل از تابش در انتقال و ارسال فیبرها در این تحقیق مورد مطالعه قرار می گیرد .برای تعیین اینکه آیا ناحیه طول موجی وجود دارد که در آن اتلافصهای عبوری ناشی از تابش، کمینه شوند ، اندازه گیری های انتقال طیفی روی فیبرها قبل و بعد از پرتودهی انجام میصشوند.فیبرهای نوری مورد نظر در این پایان نامه به طور کلی به چهارنوع فیبرهای شیشه ای نوع تجاری وفیبرهای سیلیکائی مذاب و کم اتلاف وفیبرهای پلاستیکی وفیبرهای با ناخالصی سریم تقسیم بندی شده اند .اثرات تابش مشاهده شده برای هر نوع فیبر متفاوت می باشد .بدین سبب نتایج هر تست تابش بر اساس نوع فیبردر پایان نامه گزارش می شود
Text of Note
waste, plastic fibers and fibers with cerium impurities are enumerated. Radiation effects observed are different for each type of fiber. Thus, radiation test results are reported based on fiber type in the letters -type glass fibers, silica fibers melt and low-energy radiation is necessary. Radiation penetrates into the material not only material, but also depends on the type of radiation. Changes in the radiative transfer and sending fibers to be studied in this research. To determine whether there is a wavelength region where the transmission loss due to radiation can be minimized, spectral transmission measurements are performed on the fiber before and after irradiation. Optical fibers used in this thesis are generally Four, commercial-This thesis first presents a brief description of the optical fiber and the effects of high energy radiation on various kinds of optical fiber placed. When optical fibers are against nuclear radiation actually do change their optical properties, which can lead to system performance degradation. There are many systems for aircraft and ground installations can take advantage of optical fiber. Each system must have a certain level of radiation tolerance under that amount for a minimum period of time to be able to continue to work. There are also systems in the near future are likely to be used in optical fibers. Therefore, assessment of existing optical fibers for their usability in military systems, etc. that may be exposed to high