NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی برق گرایش الکترونیک- افزارهای میکرونانو
Date of degree
۱۳۹۵/۱۱/۲۰
Body granting the degree
تبریز
SUMMARY OR ABSTRACT
Text of Note
دراین پایان نامه پیش از بیان مقدمه ای درمورد آشکارسازها، آشکارساز از نوع چندرنگی بررسی خواهد شد .پس از معرفی و آشنایی با این آشکارسازها پارامترهایی همچون بازده کوانتومی،پاسخدهی، و سرعت پاسخ ، محدوده دینامیکی ، جریان الکتریکی، محدوده طول موج، و نویز برای ارزیابی آشکارساز ارایه می شود .همانطور که می دانیم آشکارسازها فوتون های ورودی را به جریان الکتریکی تبدیل می کند.جریان الکترونی حاصله تقویت شده و از یک قطعه که تعیین کننده صفر یا یک بودن اطلاعات است عبور می کند .صفر و یک بودن هر بیت به بالاتر یا پایین تر بودن جریان از جریان آستانه برای مدت زمانی خاص بستگی دارد به بیان دیگر در بازه زمانی مربوط به هر بیت، تصمیم گیری براساس وجود نور و یا عدم حضور نور انجام می گیرد .در این پایان نامه ابتدا آشکارسازهای نوری معرفی می گیرد و سپس یک آشکارساز نمونهOrganic - Nioاستفاده می شود تا در طول موج های NIR آشکارسازی نمایند .سپس با استفاده از روش های موجود در حوزه نانوفناوری سنسور شعله با سه طول موج IR و یک طول موج UV که بصورت همزمان آشکار می شوند طراحی می شود .روش ساخت استفاده شده در این پروژ مبتنی برفاز محلول است و نانوذرات متناظر برای ساخت سنسورمبتنی بر photo conductive برای آشکارسازی طراحی می شود .ورودی کنتاکتورهای شانه ای مناسب با مواد آلی پسیو می شود .ساختار بایستی طوری طراحی شود که همزمان چهارخروجی الکتریکی بوحود آید و سپس با قرائت خروجی ها تصمیم گیری برای وجود سیگنال گرفته شود .در این کار ابتدا آشکارساز برای تک تک طول موج ها طراحی و ساخته می شود و فاکتورهای و P و D که همان طور که توضیح داده شد، باید اندازه گیری شوند .وسپس هم پوشانی آنها برای آشکارسازی همزمان بررسی و با کمترین هم پوشانی به ساخت همه آنها اقدام خواهیم نمود .برای ایزولاسیون UV از IRاز لایه PMMA استفاده خواهد شد.در فرآیند اجرایی پایان نامه ابتدا محاسبات کار تئوری صورت گرفته و سپس اقدام به کار تجربی خواهد شد
Text of Note
In the present study, the multi-color detectors will be investigated. Parameters such as quantum efficiency, responsibility, response rate, dynamic range, electrical current, wave length range, and noise are presented for evaluation of the detectors. As it is clear, the detectors transform input photons to electric current. the Obtained Electric current is reinforced and passes through an external circuits. The output signal Being zero or one for a bit depends on the distant from critical current for a specific time. In other words, in a time period associated with each bit, decision is performed based on the presence of light or not. In the present thesis, firstly photo detectors introduced and a sample detector, Nio-Organic, was used to operation in NIR wavelengths . Afterwards, using the available methods in the field of Nano detectors technology, a flame detector including three IR wavelengths and one UV wavelength which are simultaneously working is designed. The present method in this research is based on solution phase; according Nano particles is designed to produce a photo conductive- based sensor pectinate contactors is suited to passive organic materials. Structure should be designed in a way that simultaneously produces four electrical output and then a decision is adopted for existence of signals. Firstly, detectors for each of the wave lengths is designed and fabricated and factors, Idrak, P, D are determined. To isolation of the UV layer from IR we used PMMA layer. During thesis preparation, firstly theoretical calculations are performed, later experimental works is conducted