• Home
  • Advanced Search
  • Directory of Libraries
  • About lib.ir
  • Contact Us
  • History

عنوان
بهبود ساختار مبدل‮‭dc - dc‬به منظور افزایش بهره ولتاژ و کاهش تنش ولتاژ دو سر کلید با قابلیت استفاده در سیستم‌های فتوولتائیک

پدید آورنده
/توحید جلیل زاده

موضوع

رده

کتابخانه
University of Tabriz Library, Documentation and Publication Center

محل استقرار
استان: East Azarbaijan ـ شهر: Tabriz

University of Tabriz Library, Documentation and Publication Center

تماس با کتابخانه : 04133294120-04133294118

NATIONAL BIBLIOGRAPHY NUMBER

Number
‭۱۵۹۰۱پ‬

LANGUAGE OF THE ITEM

.Language of Text, Soundtrack etc
per

TITLE AND STATEMENT OF RESPONSIBILITY

Title Proper
بهبود ساختار مبدل‮‭dc - dc‬به منظور افزایش بهره ولتاژ و کاهش تنش ولتاژ دو سر کلید با قابلیت استفاده در سیستم‌های فتوولتائیک
First Statement of Responsibility
/توحید جلیل زاده

.PUBLICATION, DISTRIBUTION, ETC

Name of Publisher, Distributor, etc.
: مهندسی برق و کامپیوتر
Date of Publication, Distribution, etc.
، ‮‭۹۵‬

NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.

Text of Note
چاپی

DISSERTATION (THESIS) NOTE

Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی برق - قدرت
Date of degree
‮‭۱۳۹۵/۰۶/۰۹‬
Body granting the degree
تبریز

SUMMARY OR ABSTRACT

Text of Note
در این پایان‌نامه، ابتدا توضیح مختصر درباره سیستم‌های فتوولتائیک ارائه می‌شود .تغییرات ولتاژ و جریان خروجی پانل خورشیدی تحت تاثیر تغییرات دما و تابش منجر به کاهش بهره آن می‌شود و به همین دلیل تعقیب نقطه حداکثر توان سلول‌های فتوولتائیک اهمیت دارد .به همین منظور از مبدل‌های‮‭dc - dc‬به عنوان ادوات واسط میان بار خروجی و پانل خورشیدی استفاده می‌شود .مبدل‌هایی که ریپل جریان ورودی کم‌تری داشته باشند مناسب‌تر هستند چرا که باعث افزایش طول عمر پانل خورشیدی می‌شوند .از طرفی به دلیل پایین بودن ولتاژ خروجی پانل مبدل‌های‮‭dc - dc‬با بهره ولتاژ بالاتر مورد توجه قرار می‌گیرند .به همین منظور چند مبدل‮‭dc - dc‬مرسوم ارائه شده و مزایا و معایب هر کدام معرفی می‌شوند .با استفاده از روش کنترل‌کننده فیدبک مبدل‌های‮‭dc - dc‬مرسوم کنترل می‌شوند و در نتیجه با کنترل چرخه کاری مبدل‌های‮‭dc - dc‬بیان شده حداکثر توان از پانل ورودی استخراج می‌شود .دو مبدل‮‭dc - dc‬پیشنهادی با بهره ولتاژ بالاتر، تنش ولتاژ کم‌تر در دو سر کلید و ریپل جریان ورودی کم‌تر با قابلیت استخراج حداکثر توان از پانل ارائه می‌شوند .در ساختار پیشنهادی اول از ترکیب مبدل‌های افزاینده دو برابر کننده و ‮‭Sepic‬ مرسوم و در ساختار پیشنهادی دوم از ترکیب مبدل‌های افزاینده مرسوم و‮‭lift - Sepic self‬با گسترش به طبقه برای افزایش بهره ولتاژ، کاهش تنش ولتاژ دو سر کلید و کاهش ریپل جریان ورودی استفاده شده است .در بخش شبیه‌سازی از یکی از روش‌های مرسوم و پر کاربرد ‮‭MPPT‬ به نام کنترل کننده فیدبک برای استخراج حداکثر توان از پانل خورشیدی استفاده شده است .در نهایت کل سیستم شامل مدار معادل خطی پانل خورشیدی، مبدل‌های‮‭dc - dc‬پیشنهادی و کنترل‌کننده ‮‭MPPT‬ در محیط نرم‌افزار ‮‭PSCAD/EMTDC‬ شبیه‌سازی می‌شوند
Text of Note
In this thesis, at first a brief description is introduced about photovoltaic systems. The variations of output voltage and output current of solar panel in presence of variations of temperature and irradiance leads to decrease in its gain. therefore maximum power point tracking of photovoltaic cells is important. For this reason, dc-dc converters are used as interface devices between load and a solar panel. Converters that have lower input current ripple are more suitable because they increase the lifetime of solar panel. On the other hand, due to the low output voltage of the panel, dc-dc converters with higher voltage gain are taken into consideration. For this reason, some conventional dc-dc converters are presented and their advantages and disadvantages are introduced. By using feedback controller method, conventional dc-dc converters are controlled and thus with controlling the duty cycle of dc-dc converters maximum power point is extracted from panels. Two proposed dc-dc converters with higher voltage gain, lower voltage stress on the switch and lower input current ripple with the capability of extracting maximum power point are introduced. The first proposed topology, are combined of the conventional double boost and sepic converters and the second proposed topology are combined of the conventional boost and sepic self-lift converters with expanding to n stages. The proposed topologies have been used to increase voltage gain, decrease voltage stress on the switch and input current ripple. In simulation section, feedback controller method has been used to extract the maximum power from the solar panel. Finally, the entire system such as equivalent linear circuit of solar panel, the two proposed dc-dc converters and MPPT controller are simulated under PSCAD/EMTDC software environment

PERSONAL NAME - PRIMARY RESPONSIBILITY

جلیل زاده، توحید

PERSONAL NAME - SECONDARY RESPONSIBILITY

بابایی، ابراهیم، استاد راهنما
صباحی، مهران، استاد راهنما

ELECTRONIC LOCATION AND ACCESS

Public note
سیاه و سفید

نمایه‌سازی قبلی

Proposal/Bug Report

Warning! Enter The Information Carefully
Send Cancel
This website is managed by Dar Al-Hadith Scientific-Cultural Institute and Computer Research Center of Islamic Sciences (also known as Noor)
Libraries are responsible for the validity of information, and the spiritual rights of information are reserved for them
Best Searcher - The 5th Digital Media Festival