تهیه نانوذرات از مشتقات سلولز به روش رسوب نانومتری
General Material Designation
[پایاننامه]
Parallel Title Proper
Preparation of nanoparticles from cellulose derivatives via nanoprecipitation method
First Statement of Responsibility
/امیر حسنزاده
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: مهندسی پلیمر
Date of Publication, Distribution, etc.
، ۱۴۰۱
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۸۵ص.
Other Physical Details
:
GENERAL NOTES
Text of Note
زبان: فارسی
Text of Note
زبان چکیده: فارسی
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی - الکترونیکی
NOTES PERTAINING TO PHYSICAL DESCRIPTION
Text of Note
مصور، جدول، نمودار
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی پلیمر- فراورش
Date of degree
۱۴۰۱/۰۶/۰۱
Body granting the degree
صنعتی سهند
SUMMARY OR ABSTRACT
Text of Note
سلولز فراوانترین پلیمر تجدیدپذیر به دلیل در دسترس بودن، غیرسمی، هزینه پایین، سازگاری با محیط زیست، زیست تخریبپذیری، پایداری حرارتی و شیمیایی خوب بسیار مورد توجه بوده است .در این میان نانوذرات بر پایه مشتقات سلولز نیز قابلیت بالقوهای برای استفاده در زمینههای زیست پزشکی مانند سامانههای رهایش کنترل شده، تصویربرداری تومور و در حسگرها دارند .رسوب نانومتری از جمله روشهای تولید نانوذره از پلیمرهای پیش ساخته است که قابلیت تولید نانوذرات با ابعاد زیر ۱۰۰ نانومتر بدون استفاده از مواد فعال سطحی را دارد .علاوه بر این مراحل انجام این روش ساده، با مصرف انرژی کم و ارزان، تکرارپذیر، و قابلیت محصور کردن مولکولهای هدف را دارد .این موارد باعث شده است که رسوب نانومتری یک انتخاب مناسب در کاربردهای پزشکی باشد .در تحقیق حاضر پس از سنتز استات سلولز توسیله، نانوذرات این پلیمر و استات سلولز به روش رسوب نانومتری تهیه شد .اثر مشخصههای موثری همچون نوع پلیمر( تغییر درجه جانشینی گروههای استیل و توسیل)، نوع حلال( استون، تتراهیدروفوران، و مخلوط حلالی استون/فرمآمید)، نسبت حجمی غیرحلال به محلول، اثر روش افزدون اجزاء بر اندازه و شکل نانوذرات تهیه شده بررسی شد .برای تحلیل نتایج مشخصه برهمکنش پلیمر-حلال به روش گرانرویسنجی محلول رقیق تعیین شد .همچنین نمودار فازی تجربی و نظری سامانه ترسیم شد .نتایج نشان داد که استات سلولز توسیله با حلال استون در کنار روش افزودن محلول به غیرحلال کوچکترین نانوذرات با ابعادی در حدود ۵۵ نانومتر را بوجود آوردند.
Text of Note
Due to its availability, non-toxicity, low cost, environmental compatibility, biodegradability, and superior thermal and chemical stability, cellulose is the most abundant renewable polymer. A variety of biomedical applications, from controlled release systems to tumor imaging, may benefit from nanoparticles based on cellulose derivatives. Preformed polymers can be delayered into nanoparticles with a diameter of less than 100 nm using the nanoscale deposition process. Nanoprecipitation has become a popular medical technology for these reasons. This research used the nanoprecipitation method to prepare nanoparticles of cellulose acetate and this polymer after synthesizing cellulose acetate. The effect of effective characteristics such as the type of polymer (change in the degree of substitution of acetyl and tosyl groups), the type of solvent (acetone, tetrahydrofuran, and acetone/formamide solvent mixture), checked out the volume ratio of non-solvent to the solution, the effect of the addition method on the size and shape of prepared nanoparticles. Analyzing the results involved measuring the viscometric properties of dilute solutions to determine the characteristics of polymer-solvent interaction. Further, an experimental and theoretical phase diagram of the system was drawn, and the results indicated that cellulose acetate in combination with the acetone solvent and the method of adding the solution to the non-solvent produced the smallest nanoparticles, which measured approximately 55 nm in size.
ba
PARALLEL TITLE PROPER
Parallel Title
Preparation of nanoparticles from cellulose derivatives via nanoprecipitation method