تأثیر تعداد و نوع آند در حفاظت کاتدی با اعمال جریان (آندهای چدنی و آند گرافیتی)
General Material Designation
[پایاننامه]
Parallel Title Proper
Effect of type and number of anodes in applied flow cathodic protection(of cast iron anodes and graphite anode)
First Statement of Responsibility
/مهرداد صداقت مهر
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: مهندسی مواد
Date of Publication, Distribution, etc.
، ۱۳۹۹
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۱۱۴ص.
Other Physical Details
:
GENERAL NOTES
Text of Note
زبان: فارسی
Text of Note
زبان چکیده: فارسی
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی - الکترونیکی
NOTES PERTAINING TO PHYSICAL DESCRIPTION
Text of Note
مصور، جدول، نمودار
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی مواد- خوردگی و حفاظت از مواد
Date of degree
۱۳۹۹/۱۱/۰۱
Body granting the degree
صنعتی سهند
SUMMARY OR ABSTRACT
Text of Note
در این پژوهش، تاثیر تعداد و نوع آندهای چدنی و آند گرافیتی در حفاظت کاتدی با اعمال جریان مورد بررسی قرار گرفت .ترکیب خاک با استفاده از آنالیز شیمیایی ده اکسید به دست آمد که بیانگر خاک با ترکیب رسی و با درجه خورندگی بالا بود .برای اندازهگیری مقاومت خاک از روش چهار میخ ونر استفاده شد که مقاومت خاک در حدود.cm ۳۰۰۰ به دست آمد .برای اندازهگیری پتانسیل OCP از الکترود مرجع مس سولفات مس استفاده شد .حفاظت کاتدی با اعمال جریان با استفاده از آندهای چدنی( نوع N و C) و آند گرافیتی انجام گرفت .در هر مرحله با اعمال ولتاژهای مختلف، پتانسیل حفاظت، جریان عبوری از سیستم، مقاومتکل و تعداد آند اندازهگیری شد .در نهایت با محاسبه میزان مقاومتکل که برای هر سیستم مقدار ایدهآل مقاومتکل ۲ می باشد، نتیجهگیری مناسب درمورد به کارگیری هریک از آندهای ذکرشده انجام گرفت که آند چدنی نوع C کارایی بهتری نسبت به آند چدنی نوع N و آند گرافیتی داشته است .
Text of Note
In this research, the effect of the number and type of cast iron and graphite anodes on cathodic protection by applying current was investigated. Soil composition was obtained by chemical analysis of ten oxide which indicated a soil with a clay composition and a high degree of corrosion. To Measure soil resistance, the four- nail wener method was used, which obtained soil resistance of about 3000.cm. Cu/CuSO4 reference electrode was used to measure the OCP potential. Control electrode. Cathodic protection was performed by applying current using cast iron anode(type N and C) and graphite anodes. At each stage, by applying different voltages, the protection potential, the current passing through the system, the total resistance and the number of anodes were measured. Finally, by calculating the total resistance, which is ideal value of the total resistance 2 for each system, a suitable conclusion was made about the use of each of the mentioned anodes that type C cast iron anode had better performance than cast iron anode type N and graphite anode.
ba
PARALLEL TITLE PROPER
Parallel Title
Effect of type and number of anodes in applied flow cathodic protection(of cast iron anodes and graphite anode)
TOPICAL NAME USED AS SUBJECT
آند چدنی نوع C
آند چدنی N
آندگرافیتی
آنالیز شیمیایی ده اکسید
مقاومت کل
UNCONTROLLED SUBJECT TERMS
Subject Term
Cast iron anode, graphite anode, soil composition, protection potential, Current passing through the system, calculated resistance
Subject Term
آند چدنی نوع C، آند چدنی N، آندگرافیتی، آنالیز شیمیایی ده اکسید، مقاومت کل
PERSONAL NAME - PRIMARY RESPONSIBILITY
صداقت مهر، مهرداد
PERSONAL NAME - SECONDARY RESPONSIBILITY
پروینی احمدی، نقی، استاد راهنما
ORIGINATING SOURCE
Country
ایران
Date of Transaction
20230913
LOCATION AND CALL NUMBER
Call Number
مواد ،۷۰۶۴۴،۱۳۹۹
ELECTRONIC LOCATION AND ACCESS
Host name
تأنایرج لامعا اب یدتاک تظافح رد دنآ عون و دادعت ریث )یتیفارگ دنآ و یندچ یاهدنآ(.pdf