Removal of nitrate from aqueous medium by electrochemical reduction method
First Statement of Responsibility
/علی عبدوی دارابی
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: مهندسی شیمی
Date of Publication, Distribution, etc.
، ۱۳۹۷
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۱۰۲ص.
Other Physical Details
:
GENERAL NOTES
Text of Note
زبان: فارسی
Text of Note
زبان چکیده: فارسی
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی - الکترونیکی
NOTES PERTAINING TO PHYSICAL DESCRIPTION
Text of Note
مصور، نمودار
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی شیمی
Date of degree
۱۳۹۷/۱۱/۰۱
Body granting the degree
صنعتی سهند
SUMMARY OR ABSTRACT
Text of Note
در این پژوهش از روش احیای الکتروشیمیایی جهت تصفیهی محلول آبی سنتزی حاوی نیترات، استفاده شده است .الکترود آند مورد استفاده، الکترود DSA تجاری بر پایه تیتانیم با پوشش مخلوط اکسید فلزی و الکترود کاتد، آهن گالوانیزه میباشد .آزمایشها در راکتور ناپیوسته به حجم ۲۵۰ میلیلیتر انجام شد .هر آزمایش، به مدت ۲۴۰ دقیقه به طول انجامید و اثر پارامترهای ولتاژ، pH و غلظت سدیم کلرید بر روی عملکرد سیستم بررسی شد .الکترولیت مورد استفاده، سدیم سولفات بوده که در همهی آزمایشها با غلظت ثابت به محلول اضافه میشد .به دلیل اینکه در فرآیند الکتروشیمیایی جهت حذف نیترات، آمونیاک محصول نهایی می باشد، از سدیم کلرید استفاده شد تا انتخاب پذیری به سمت نیتروژن مولکولی تغییر کند .بهینهسازی نتایج با در نظر گرفتن کمترین میزان آمونیاک باقی مانده در محلول، کمترین هزینهی فرآیند و کمترین زمان فرآیند همراه با بیشترین درصد حذف نیترات، در حضور کمترین غلظت سدیم کلرید انجام شد و تحت این شرایط، درصد بهینهی حذف نیترات ( ۸۵/۳) در مدت زمان ۱۳۸/۱ دقیقه حاصل شد و میزان آمونیاک باقیمانده، صفر میلیگرم بر لیتر اندازهگیری گردید .هزینهی فرآیند نیز در شرایط بهینه، ۰/۷۴۶ کیلووات ساعت بر گرم نیترات حذف شده برآورد شد
Text of Note
In this study, for treatment of synthetic aqueous solution containing nitrate, electrochemical reduction method was used. The anodic electrode was commercial Dimensional Stable Anode (DSA) based on titanium coated with Mixed Metal Oxide (MMO) and the cathodic electrode was galvanized iron. All experiments were performed in a batch reactor with volume of 250 ml. Each experiment lasted 240 min and the influence of parameters such as voltage, pH and sodium chloride concentration on systems function was studied. The used Electrolite was sodium solphate that in all experiments with fixed concentration added to solution. Becauce in electrochemical process for removal of nitrate, Ammonia is the end product, sodium chloride was used to change the selectivity to molecular nitrogen. The optimization of results was performed cosidering the least remainder ammonia in solution, the least cost of process and the least time of process with the highest percent of removal of nitrate in present of the least concentration of sodium chloride. And in these conditions, the optimal percent (85.3 ) of removal of nitrate was reached at 138.1 min. And the remainder of ammonia was 0 mg/L. The cost of process in optimal conditions was 0.746 KWh/g NO3 removed.
ba
PARALLEL TITLE PROPER
Parallel Title
Removal of nitrate from aqueous medium by electrochemical reduction method