عنوان

Polymer/carbon blend electrodes and polyphosphonate membranes for PEM fuel cells

Number

TLpq304063387

.Language of Text, Soundtrack etc

انگلیسی

Title Proper

Polymer/carbon blend electrodes and polyphosphonate membranes for PEM fuel cells

General Material Designation

[Thesis]

First Statement of Responsibility

X. Xu

Subsequent Statement of Responsibility

I. Cabasso

Name of Publisher, Distributor, etc.

State University of New York College of Environmental Science and Forestry

Date of Publication, Distribution, etc.

1993

Specific Material Designation and Extent of Item

236

Dissertation or thesis details and type of degree

Ph.D.

Body granting the degree

State University of New York College of Environmental Science and Forestry

Text preceding or following the note

1993

Text of Note

Solvent cast porous electrodes made of conductive catalytic carbon and thermoplastic polymer blends and polyphosphonate proton transfer membranes for polymer electrolyte membrane (PEM) fuel cell have been developed and studied. Fundamental characteristics of these components and their electrochemical performances are reported. Phase inversion technique was employed to produce novel porous fuel cell electrodes with controlled morphology. The influence of the structure on: both electrochemical active layer and gas diffusion layer of the electrode, as well as the catalyst distribution were extensively studied. Electron Microscopy techniques were used to reveal the relationship between structural parameters and electrochemical performance. This study suggests that the gases accessibility to the maximum number of the reaction sites, that have both ionic and electronic conductivity, determine the electrode efficiency. Carbons with different sizes and surface properties were studied. Carbon blends were utilized to alter the structure and surface properties of the electrodes. A current of greater than 600 mA/cm2 at 500 mV, usd50\sp\circ\rm C,usd usd{\sim}1usd atm (atmospheric pressure) with Pt catalyst surface concentration of electrode usd{\sim}0.1usd mg/cm2 was generated in fuel cell with this porous electrode. Thermal properties of carbon/polymer blends were also studied. The crystallization behavior of polyvinylidene fluoride and glass transition temperature of polysulfone in presence of carbon were examined. The results of this study suggest that carbon has significant impact on the structure and thermal properties of these thermoplastic polymers. The relevant properties of poly(dimethyl phenylene oxide phosphonic acid) ion exchange membrane usd\rm (PPOP\sb{n}H),usd such as ionic conductivity, water content, ion charge density, dependence of temperature, and thermal stability, have been evaluated in this study. The usd\rm PPOP\sb{n}Husd membranes display a good stability at the elevated temperature usd({\sim}150\sp\circ\rm C).usd These membranes were tested in PEM fuel cell at low temperature usd({<}100\sp\circ\rm C).usd Preliminary results suggest that the usd\rm PPOP\sb{n}Husd can be a good candidate as a proton transfer membrane for the PEM fuel cell.

Applied sciences

Chemical engineering

Energy

Polymers

Polymers

Pure sciences

I. Cabasso

X. Xu

Electronic name

p

[Thesis]

276903

a

Y