عنوان

Design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates /

(Number (ISBN

1598298615

(Number (ISBN

9781598298611

Erroneous ISBN

1598298607

Erroneous ISBN

9781598298604

Number

b778253

Title Proper

Design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates /

General Material Designation

[Book]

First Statement of Responsibility

Li Yang, Amin Rida, and Manos M. Tentzeris.

Place of Publication, Distribution, etc.

San Rafael, Calif. (1537 Fourth Street, San Rafael, CA 94901 USA) :

Name of Publisher, Distributor, etc.

Morgan & Claypool Publishers,

Date of Publication, Distribution, etc.

©2009.

Specific Material Designation and Extent of Item

1 online resource (viii, 81 pages) :

Other Physical Details

illustrations

Series Title

Synthesis lectures on RF/microwaves ;

Volume Designation

# 1

Text of Note

Series from website.

Text of Note

Title from PDF title page (viewed June 3, 2009).

Text of Note

Includes bibliographical references (pages 79-81).

Text of Note

Radio frequency identification introduction -- History of radio frequency identification (RFID) -- Challenges in RFID tag design -- The cost of RFID tag -- Tag performance -- RFID/sensor integration -- Flexible organic low cost substrates -- Paper: the ultimate solution for lowest cost environmentally friendly RF -- Substrate -- Dielectric characterization of the paper substrate -- Dielectric constant measurements -- Dielectric loss tangent measurements -- Cavity resonator method -- Liquid crystal polymer: properties and benefits for RF applications -- Inkjet-printing technology and conductive ink -- Benchmarking RFID prototypes on organic substrates -- RFID antenna design challenges -- RFID antenna with serial stub feeding structures -- Design approach -- Antenna circuit modeling -- Measurement results and discussion -- Effect on antenna parameters when placed on common packaging materials -- Bowtie T-match RFID antenna -- Design approach -- Results and discussion -- Monopole antenna -- Design approach -- Results and discussion -- Antenna gain measurement -- Conformal magnetic composite RFID tags -- Inkjet-printed RFID-enabled sensors -- Active RFID-enabled sensor -- Passive RFID-enabled sensor.

0

Text of Note

This book presents a step-by-step discussion of the Design and Development of Radio Frequency Identification (RFID) and RFID-enabled Sensors on Flexible Low Cost Substrates for the UHF Frequency bands. Various examples of fully function building blocks (design and fabrication of antennas, integration with ICs and microcontrollers, power sources, as well as inkjet-printing techniques) demonstrate the revolutionary effect of this approach in low cost RFID and RFID-enabled sensors fields. This approach could be easily extended to other microwave and wireless applications as well. The first chapter describes the basic functionality and the physical and IT-related principles underlying RFID and sensors technology. Chapter two explains in detail inkjet-printing technology providing the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic substrates such as Liquid Crystal Polymer (LCP) or paper-based substrates. Chapter three demonstrates several compact inkjet-printed UHF RFID antennas using antenna matching techniques to match IC's complex impedance as prototypes to provide the proof of concept of this technology. Chapter four discusses the benefits of using conformal magnetic material as a substrate for miniaturized high-frequency circuit applications. In addition, in Chapter five, the authors also touch up the state-of-the-art area of fully-integrated wireless sensor modules on organic substrates and show the first ever 2D sensor integration with an RFID tag module on paper, as well as the possibility of 3D multilayer paper-based RF/microwave structures. The authors would like to express our gratitude to the individuals and organizations that helped in one way or another to produce this book. First to the colleagues in ATHENA research group in Georgia Institute of Technology, for their contribution in the research projects. To the staff members in Georgia Electronic Design Center, for their valuable help. To Jiexin Li, for her continuous support and patience. To Amir Mortazawi, our series editor, for his guidance. Also, the book would not have been developed without the very capable assistance from Joel D. Claypool, and other publishing professionals at Morgan & Claypool Publishers.

Source for Acquisition/Subscription Address

Safari Books Online

Stock Number

CL0500000329

Title

Design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates.

International Standard Book Number

1598298607

Radio frequency identification systems-- Mathematical models.

POLITICAL SCIENCE-- Political Freedom & Security-- Civil Rights.

POLITICAL SCIENCE-- Political Freedom & Security-- Human Rights.

Radio.

POL-- 004000

POL-- 035010

Number

Edition

Class number

Book number

Li, Yang.

Rida, Amin.

Tentzeris, Manos M.

Date of Transaction

20201203114810.0

Cataloguing Rules (Descriptive Conventions))

pn

Electronic name

[Book]

Y