عنوان

Carpentry and joinery.

(Number (ISBN

0080476406

(Number (ISBN

1423742443

(Number (ISBN

9780080476407

(Number (ISBN

9781423742449

Erroneous ISBN

0750665041

Erroneous ISBN

9780750665049

Number

b741969

Title Proper

Carpentry and joinery.

General Material Designation

[Book]

Volume Designation

Volume 2.

Edition Statement

3rd ed. /

Statement of Responsibility Relating to Edition

Brian Porter and Christoper Tooke.

Place of Publication, Distribution, etc.

Boston :

Name of Publisher, Distributor, etc.

Elsevier Butterworth-Heinemann,

Date of Publication, Distribution, etc.

2005.

Specific Material Designation and Extent of Item

1 online resource (xiii, 211 pages) :

Other Physical Details

illustrations

Text of Note

Includes index.

Text of Note

Previous edition: London: Arnold, 1991.

Text of Note

Cover -- Contents -- Foreword by W.R. Rose -- Foreword by David R. Winson -- Preface -- Acknowledgements -- CHAPTER ONE SITE SETTING-OUT -- 1.1 Linear measurement -- 1.1.1 Measuring tapes -- 1.1.2 Laser digital distance metres -- 1.1.3 Sloping sites -- 1.1.4 Transferring measurements -- 1.2 Straight lines -- 1.2.1 Builder's line -- 1.2.2 Chalk line -- 1.2.3 Straight edges -- 1.3 Right angles -- 1.3.1 Right angles using a 3:4:5 ratio -- 1.3.2 Builder's square -- 1.3.3 Optical site square -- 1.3.4 Application of squaring methods -- 1.3.5 Profile boards -- 1.4 Angles other than right angles -- 1.4.1 Regular polygons -- 1.4.2 Angle measuring devices -- 1.5 Circles, arcs, and segments -- 1.6 Datums -- 1.7 Levelling -- 1.7.1 Traditional spirit level -- 1.7.2 Digital spirit level -- 1.7.3 Water level -- 1.7.4 The 'Comp-Mark' electronic level -- 1.7.5 'Cowley' automatic level -- 1.7.6 Laser levels -- 1.7.7 Auto rotating laser level -- 1.8 Vertical setting-out -- 1.8.1 Plumb-bob -- 1.8.2 Plumb-bob and rule -- 1.8.3 Spirit level (Plumb stick) -- CHAPTER TWO FENCES AND HOARDING -- 2.1 Fences -- 2.1.1 Laws on fencing -- 2.2 Hoarding -- 2.2.1 Encroachment onto a public footpath -- 2.2.2 Observation windows -- 2.2.3 Fan hoarding -- 2.3 Signboards -- 2.4 Posts -- 2.5 Weathering and maintenance -- CHAPTER THREE FORMWORK (TEMPORARY WORK) -- 3.1 Design -- 3.1.1 Loads on formwork -- 3.2 Pre-cast work (mould boxes) -- 3.3 In situ formwork (shuttering) -- 3.3.1 Form (shutter) support and formwork hardware -- 3.3.2 Sheeting (sheathing) and form lining -- 3.3.3 Preparing forms for concrete -- 3.3.4 Column formwork -- 3.3.5 Walls -- 3.3.6 Suspended floor and roof formwork -- 3.3.7 Edge treatment -- 3.3.8 Beam formwork -- 3.3.9 Striking formwork -- CHAPTER FOUR TURNING PIECES AND ARCHED CENTRES UP TO 1-M SPAN -- 4.1 Methods of setting-out geometric arch shapes -- 4.1.1 Semicircular arch -- 4.1.2 Segmental arch -- 4.1.3 Equilateral arch -- 4.1.4 Drop arch -- 4.1.5 Lancet arch -- 4.2 Determining the length of radii by calculation to form an arc -- 4.3 Turning pieces -- 4.4 Centres -- 4.5 Centre construction -- 4.6 Erecting centres -- 4.7 Easing and striking -- CHAPTER FIVE GROUND FLOORS -- 5.1 Construction of floors -- 5.1.1 Floor joists -- 5.1.2 Levelling -- 5.1.3 Constructional hearths (solid fuel and oil-burning appliances) -- 5.1.4 Door openings -- 5.1.5 Split levels -- 5.2 Concrete floors incorporating timber -- 5.3 Thermal insulation -- 5.4 Flooring (decking) -- 5.4.1 Laying floor boards -- 5.4.2 Chipboard flooring -- 5.4.3 Access to s.

0

Title

Carpentry and joinery. Volume 2.

International Standard Book Number

0750665041

Carpentry.

Joinery.

Carpentry.

Joinery.

TECHNOLOGY & ENGINEERING-- Construction-- Carpentry.

TEC-- 005010

Number

Edition

Class number

Book number

Porter, Brian,1938-

Tooke, Christopher.

Date of Transaction

20201204024614.0

Cataloguing Rules (Descriptive Conventions))

pn

Electronic name

[Book]

Y