عنوان
پدید آورنده
موضوع
رده
TN871.2 .L96 2010eb
TN871
.
2
.
L96
2010eb
کتابخانه
محل استقرار
INTERNATIONAL STANDARD BOOK NUMBER
(Number (ISBN
1856178447
(Number (ISBN
9781856178440
Erroneous ISBN
9781856178433
NATIONAL BIBLIOGRAPHY NUMBER
Number
b712733
TITLE AND STATEMENT OF RESPONSIBILITY
Title Proper
Working guide to drilling equipment and operations /
General Material Designation
[Book]
First Statement of Responsibility
William C. Lyons.
EDITION STATEMENT
Edition Statement
1st ed.
.PUBLICATION, DISTRIBUTION, ETC
Place of Publication, Distribution, etc.
Boston :
Name of Publisher, Distributor, etc.
Gulf Pub./Elsevier,
Date of Publication, Distribution, etc.
2010.
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
1 online resource (xiv, 602 pages) :
Other Physical Details
illustrations
INTERNAL BIBLIOGRAPHIES/INDEXES NOTE
Text of Note
Includes bibliographical references and index.
CONTENTS NOTE
Text of Note
Front Cover; Working Guide to Drilling Equipment and Operations; Copyright Page; Table of Contents; Chapter 1. DRILLING MUDS AND COMPLETION SYSTEMS; 1.1 Functions of Drilling Muds; 1.2 Classifications; 1.3 Testing of Drilling Systems; 1.4 Completion and Workover Fluids; 1.5 Safety Aspects of Handling Brines; 1.6 Preventing Contamination; Chapter 2. DRILL STRING: COMPOSITION AND DESIGN; 2.1 Drill Collar; 2.2 Drill Pipe; 2.3 Drill String Inspection Procedure; Chapter 3. AIR AND GAS DRILLING; 3.1 Bottomhole Pressure; 3.2 Minimum Volumetric Flow Rate; 3.3 Drill Bit Orifices or Nozzles.
Text of Note
3.4 Injection Pressure3.5 Water Injection; 3.6 Saturation of Gas; 3.7 Eliminate Stickiness; 3.8 Suppression of Hydrocarbon Combustion; 3.9 Aerated Drilling (Gasified Fluid Drilling); 3.10 Stable Foam Drilling; 3.11 Completions Operations; 3.12 Compressor and Inert Air Generator Units; 3.13 Highly Deviated Well Drilling and Completions; 3.14 Downhole Motors; Chapter 4. DIRECTIONAL DRILLING; 4.1 Glossary of Terms used in Directional Drilling; 4.2 Dogleg Severity (Hole Curvature) Calculations; Chapter 5. SELECTION OF DRILLING PRACTICES; 5.1 Health, Safety and Environment; 5.2 Production Capacity.
Text of Note
5.3 Well Planning and Implementation5.4 Drilling Implementation; 5.5 Post-Run Evaluation; Chapter 6. WELL PRESSURE CONTROL; 6.1 Introduction; 6.2 Surface Equipment; 6.3 When and How to Close the Well; 6.4 Gas-Cut Mud; 6.5 The Closed Well; 6.6 Kick Control Procedures; 6.7 Maximum Casing Pressure; 6.8 Maximum Borehole Pressure; Chapter 7. FISHING OPERATIONS AND EQUIPMENT; 7.1 Causes and Prevention; 7.2 Pipe Recovery and Free Point; 7.3 Parting the Pipe; 7.4 Jars, Bumper Subs and Intensifiers; 7.5 Attachment Devices; 7.6 Fishing for Junk; 7.7 Abandonment; 7.8 Wirelines.
Text of Note
Chapter 11. ENVIRONMENTAL CONSIDERATIONS FOR DRILLING OPERATIONS11.1 Introduction; 11.2 Well Site; 11.3 Environmental Regulations; 11.4 Site Assessment and Construction; 11.5 Environmental Concerns While in Operation; Index.
Text of Note
Chapter 8. CASING AND CASING STRING DESIGN8.1 Types of Casing; 8.2 Casing Data; 8.3 Combination Casing Strings; 8.4 Running and Pulling Casing; Chapter 9. WELL CEMENTING; 9.1 Introduction; 9.2 Chemistry of Cements; 9.3 Cementing Principles; 9.4 Standardization and Properties of Cements; 9.5 Properties of Cement Slurry and Set Cement; 9.6 Cement Additives; 9.7 Primary Cementing; 9.8 Secondary Cementing; Chapter 10. TUBING AND TUBING STRING DESIGN; 10.1 API Physical Property Specifications; 10.2 Running and Pulling Tubing; 10.3 Preparation and Inspection before Running; 10.4 Packers.
0
8
8
8
8
SUMMARY OR ABSTRACT
Text of Note
Drilling technology has evolved in order to get at the increasingly harder to find oil, and in a more environmentally friendly way. Successful drilling operations require blending many technologies. Drilling equipment and procedures have a unique language that must be conquered in order to understand drilling operations. Working Guide to Drilling Equipment and Operations provides a fundamental, basic knowledge of the intricacies of drilling fluid, drilled solids management, drill bits, drill string design, directional drilling, cementing, casing, hydraulic optimization, and a discus.
ACQUISITION INFORMATION NOTE
Source for Acquisition/Subscription Address
OverDrive, Inc.
Stock Number
2D947A4C-0BBB-42CA-922C-F4F80FBDBC30
OTHER EDITION IN ANOTHER MEDIUM
Title
Working guide to drilling equipment and operations.
International Standard Book Number
9781856178433
TOPICAL NAME USED AS SUBJECT
Gas well drilling-- Equipment and supplies.
Oil well drilling-- Equipment and supplies.
Engineering & Applied Sciences.
Gas well drilling-- Equipment and supplies.
Mechanical Engineering.
Metallurgy & Mineralogy.
Oil well drilling-- Equipment and supplies.
TECHNOLOGY & ENGINEERING-- Mining.
(SUBJECT CATEGORY (Provisional
TEC-- 026000
DEWEY DECIMAL CLASSIFICATION
Number
622
.
338190284
Edition
22
LIBRARY OF CONGRESS CLASSIFICATION
Class number
TN871
.
2
Book number
.
L96
2010eb
PERSONAL NAME - PRIMARY RESPONSIBILITY
Lyons, William C.
ORIGINATING SOURCE
Date of Transaction
20201208031332.0
Cataloguing Rules (Descriptive Conventions))
pn
ELECTRONIC LOCATION AND ACCESS
Electronic name
مطالعه متن کتاب [Book]
Y
