عنوان

Advances in Polymer Blends and Alloys Technology, Volume II

(Number (ISBN

1351468235

(Number (ISBN

9781351468237

Title Proper

Advances in Polymer Blends and Alloys Technology, Volume II

General Material Designation

[Book]

Place of Publication, Distribution, etc.

Boca Raton :

Name of Publisher, Distributor, etc.

Routledge,

Date of Publication, Distribution, etc.

2018.

Specific Material Designation and Extent of Item

1 online resource (216 pages)

Text of Note

Cover; Half Title; Title Page; Copyright Page; Table of Contents; Mechanical Behaviour of Blends of Polystyrene with Styrene-Isoprene-Styrene (SIS) and Ethylene-Propylene Rubber (EPR); Effect of the Molecular Structure of in situ-Generated Ethylene-Propylene Copolymers on the Impact Properties of Polypropylene; Degradation During Blending of ABS/PC and Its Impact Strength Variation; Blends of Styrene-Maleic Anhydride Copolymer with ABS; Continuous Graft-Copolymerization Process Using a Two-Stage Type Twin Screw Extruder

Text of Note

Mechanical, Dynamic Mechanical Properties and Morphology of Modified Folyphenylene Oxide BlendsPolymer Emulsion Blends as Adhesives for Flexible Packaging; Determination of the Chain Configuration in Polymer Blends Using Fluorescence Anisotropy Measurement; Miscible Blends of Polybutadiene and Polyisoprene; Polyurethane-Polyvinyl Chloride Interpenetrating Polymer Network; Engineering Rheology in the Design and Fabrication of Industrial Polyblends

0

8

Text of Note

From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11).

Title

Advances in Polymer Blends and Alloys Technology, Volume II.

International Standard Book Number

9780877626701

Polymers.

Polymers.

Number

Edition

Class number

Finlayson, Kier.

Finlayson, Kier.

Date of Transaction

20200822180319.0

Cataloguing Rules (Descriptive Conventions))

pn

Electronic name

[Book]

Y