Development of Customized Distribution Automation System (DAS) for Secure Fault Isolation in Low Voltage Distribution System.
General Material Designation
[Book]
First Statement of Responsibility
M M Ahmed
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
INTECH Open Access Publisher
Date of Publication, Distribution, etc.
2010
SUMMARY OR ABSTRACT
Text of Note
In this research project, a Customized SCADA based RTU for service substation and customer service substation is developed by using the open loop concept for the distribution networks. Currently, the SCADA system in the low distribution system implemented by TNB only focuses on alarm monitoring. SSO has to operate the control functions at the HMI side. The operator needs to analyze the situation and to make appropriate actions. In this research, a Customized SCADA is built to provide automatic fault isolation for low distribution system. The objective of the research is to provide an HMI for SCADA that is capable to build interfaces with I/O devices and fault isolation method. The contribution of this research includes developing a complete fault isolation algorithm based on an open loop distribution system. Service Substation Panel, Customer Service Substation Panel and Customer Panel have been built to validate the proposed methodology. In this chapter, the proposed methodology is summarized with the experimental results and conclusion based on the results is also highlighted. The HMI is capable to communicate with the I/O devices. An HMI for SCADA is developed in this research by using an embedded Ethernet controller as the converter to communicate with the I/O devices. In addition to the automation, the controller retrieves the data from.