عنوان

Machinability of Engineering Materials

(Number (ISBN

9400966318

(Number (ISBN

9400966334

(Number (ISBN

9789400966314

(Number (ISBN

9789400966338

Number

b593724

Title Proper

Machinability of Engineering Materials

General Material Designation

[Book]

First Statement of Responsibility

by B. Mills, A.H. Redford.

Place of Publication, Distribution, etc.

Dordrecht

Name of Publisher, Distributor, etc.

Springer Netherlands

Date of Publication, Distribution, etc.

1983

Text of Note

1 The Concept of Machinability --; 1.1. Introduction --; 1.2. Definition of Machinability --; 2 Fundamental Aspects of the Machining Process --; 2.1. Mechanics of Metal Cutting --; 2.2. Tool Wear --; 2.3. Surface Finish --; 2.4. Chip Formers --; 2.5. The Action of Cutting Fluids --; References --; 3 The Assessment of Machinability --; 3.1. Types of Machinability Test --; 3.2. Short Machinability Tests --; 3.3. Non-Machining Tests --; 3.4. Machining Tests --; 3.5. Combination of Machining Parameters --; 3.6. Machinability Assessment for Processes Other than Single Point Turning --; 3.7. Machinability Assessment Relating One Process to Another --; 3.8. On-Line Assessment of Tool Wear --; References --; 4 Tool Materials --; 4.1. Historical Background --; 4.2. Requirements of Tool Materials --; 4.3. High-Speed Steels --; 4.4. Cemented Carbides --; 4.5. Cast Cobalt Alloys --; 4.6. Ceramic Cutting Tool Materials --; 4.7. Diamond --; References --; 5 Workpiece Materials --; 5.1. Introduction --; 5.2. Ferrous Materials --; 5.3. Titanium Alloys --; 5.4. Nickel-Based Alloys --; 5.5. Aluminium Alloys --; 5.6. Magnesium and its Alloys --; 5.7. Copper and its Alloys --; References --; 6 The ISO Machinability Test --; 6.1. Introduction --; 6.2. Reference Work pieces --; 6.3. Reference Tool Materials and Tool Geometries --; 6.4. Reference Cutting Fluids --; 6.5. Cutting Conditions --; 6.6. Tool Life Criteria and Tool Wear Measurements --; 6.7. Tool Wear Measurement --; 6.8. Equipment --; 6.9. Tool Life Test Procedure --; 6.10. Evaluation of Tool Life Data --; 7 The Effect of Machinability Data on Metal Removal Performance and Economics --; 7.1. Introduction --; 7.2. Criteria of Performance --; 7.3. Economics of Turning Operations --; 7.4. Machining for Minimum Cost --; 7.5. Machining for Maximum Production --; 7.6. Machining for Maximum Profit --; 7.7. Machinability Data Applied to Milling --; 7.8. Reliability of Machinability Data --; Reference --; Appendix 1 Analysis to Determine Cutting Temperatures in Single Point Metal Cutting --; Appendix 2 Analyses for Two Short Absolute Machinability Tests --; A2.1 The Variable-Rate Machining Test --; A2.2 The Step Turning Test.

Text of Note

In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future. Thus, there will continue to be a requirement for the development of improved cutting tool materials, workpiece materials, cutting fluids and testing methods; collectively this activity can be described as improving machinability. Machinability is a parameter which in many ways is vague, sometimes qualitative and very often misunderstood. The purpose of this text is to give a broad understanding of the concept, methods of assessment and ways of improving machinability to the manufacturing engineer, the metallurgist and the materials scientist. The text should also be of interest to those engaged in research in manufacturing engineering and metal cutting. The text, of necessity, does not attempt to give detailed information about the machining characteristics of a wide range of tool and workpiece materials. It is felt that this is beyond the scope of the book and is best left to other sources, such as machinability data banks and the Machining Handbook*, whose main objective is to present this kind of information. It is hoped that the reader will be able to progress logically from the fundamental aspects of the metal cutting process to the sections on the more specific topics of machinability including machinability testing and the properties of tool and workpiece materials which affect their machining performance.

Physical Sciences & Mathematics.

Science (General)

Sciences - General.

Class number

Book number

by B. Mills, A.H. Redford.

A H Redford

B Mills

Electronic name

[Book]

Y