عنوان

Theory and application of drilling fluid hydraulics

(Number (ISBN

9400953038

(Number (ISBN

9789400953031

Number

b593504

Title Proper

Theory and application of drilling fluid hydraulics

General Material Designation

[Book]

First Statement of Responsibility

written and compiled by EXLOG staff ; edited by Alun Whittaker.

Place of Publication, Distribution, etc.

Boston

Name of Publisher, Distributor, etc.

International Human Resources Development Corporation ; Dordrecht : D. Reidel Publishing Company, a member of the Kluwer Academic Publishers Group, [

Date of Publication, Distribution, etc.

1985] ©1985

Specific Material Designation and Extent of Item

(x, 203 pages) : illustrations

Series Title

EXLOG series of petroleum, geology, and engineering handbooks, 1.

Text of Note

1. Introduction --; Fundamental Properties of Fluids --; Density --; Hydrostatic Pressure --; Pascal's Law --; References --; 7. Fluid Flow: Principles, Models, & Measurement --; Fluid-Flow Principles --; Fluid Models --; Measurement of Fluid Flow Properties --; References --; 3. The Drilling Fluid --; Water-Based Muds --; Oil-Based Muds --; Mud Viscosity --; References --; The Mud Circulating System --; The Pumps --; The Drillstring --; The Bit --; The Annulus --; References --; 5. The Drillstring --; Laminar Flow --; Critical Velocity --; Turbulent Flow --; Transitional Flow --; Tool Joints --; References --; 6. Motor, Turbine, & Bit --; The Motor --; The Turbine --; The Bit Nozzles --; References --; 7. The Annulus --; Laminar Flow --; Turbulent Flow --; Transitional Flow --; References --; 8. Swab and Surge --; General --; References --; 9. Cuttings Transport --; General --; References --; 10. Optimizing the Hydraulics Program --; General --; References --; Appendix A: Nomenclature --; Appendix B: Units --; Appendix C: Key Equations --; Appendix D: Example Hydraulics Calcualtions --; Glosary.

Text of Note

The objectives of this book are (1) to serve as a reasonably comprehensive text on the subject of drilling hydraulics and (2) to provide the field geologist with a quick reference to drilling hydraulics calculations. Chapter 1 introduces the basic principles of fluid properties, and Chapter 2 presents the general principles of fluid hydraulics. Chapters 3 through 10 analyze specific hydraulic considerations of the drilling process, such as viscometric measurements, pressure losses, swab and surge pressures, cuttings transport and hydraulic optimization. References are presented at the end of each section. The units and nomenclature are consistent throughout the manual. Equations are given generally in consistent S.1. units; some common expressions are also given in oilfield units. Nomenclature is explained after every equation when necessary, and a comprehensive list of the nomenclature used is given in Appendix A. Units are listed in Appendix B. In Appendix C, all the important equations are given in both S.1. and oilfield units. Appendix D contains example hydraulics calculations. A glossary is included. THEORY AND APPLICATION OF DRILLING FLUID HYDRAULICS 1 INTRODUCTION To dri 11 a we 11 safely and succes sfull y depends upon a thorough unders tandi ng of drilling hydraulics principles. Thus, drilling hydraulics is a very impor­ tant subject with which all logging geologists should be familiar.

Drilling muds.

Class number

Book number

written and compiled by EXLOG staff ; edited by Alun Whittaker.

Alun Whittaker

EXLOG (Firm)

Electronic name

[Book]

Y