عنوان

Materials for transportation technology

(Number (ISBN

3527301240

(Number (ISBN

3527606025

(Number (ISBN

9783527301249

(Number (ISBN

9783527606023

Number

b563627

Title Proper

Materials for transportation technology

General Material Designation

[Book]

First Statement of Responsibility

P.J. Winkler (editor).

Place of Publication, Distribution, etc.

[Germany]

Name of Publisher, Distributor, etc.

Deutsche Gesellschaft für Materialkunde ; Weinheim ; Chichester ; New York : Wiley-VCH

Date of Publication, Distribution, etc.

©2000.

Specific Material Designation and Extent of Item

(xi, 372 pages) : illustrations

Text of Note

On cover: FEMS.

Text of Note

--; SI-SIC LigaFill(r) Foams and Related Net-like Structures --; New Lightweight and Low-cost Materials for Spaceborne Applications. --; J. Adler, G. Standke, Fraunhofer Institute, IKTS, Dresden (D). Study of the Hot- and Warm Workability of the 2618 Aluminium Alloy. --; F. Bardi, M. Cabibbo, P. Cavaliere, E. Evangelista, S. Spigarelli, INFM/University of Ancona (I). --; Modeling of Cyclic Stress-Strain Behavior and Life Prediction of Near- Titanium Alloy IMI 834 under Thermomechanical Fatigue Conditions. --; H.J. Maier, Universität Paderborn (D). --; H.-J. Christ, R.G. Teteruk, Universität Siegen (D). --; High Temperature Al-0.3Li-1Mg Alloys Reinforced With Ultra Fine TiO2 Additions. --; T. Gerique, CENIM-CSIC (E). --; A. Shakesheff, DERA (UK). --; M. De Sanctis, L. Lazzeri, A. Solina, R. Valentini, University of Pisa (D). --; Kinetics and Thermodynamics of Hydrogen Absorption in b-Titanium Alloys. --; H.-J. Christ, M. Decker, K. Prü[beta]er, Universität Siegen (D). --; III. Rail and Ships. --; Deformation and Lifetime Behaviour of Cyclic Loaded Rail and Wheel Steels. --; B. Denne, K.-H. Lang, D. Löhe, Universität Karlsruhe (D). --; Thermal Fatigue of a Railway Wheel. --; B. Al Taweel, S. Pommier, B.B. Viet, SNCF, Gentre de Levalbis, Levallois-Perret (F). --; F. Demilly, Valdunes (F). --; RIMLoC-Process for Particle Reinforced Al-Metal-Matrix-Composites for Wear Resistant Light-Weight-Components. --; M. Dette, Gerhard-Mercator-Universität-GH Duisburg (D). --; O. Brandt, D. Brungs, A. Ke[beta]er, Honsel AG, Meschede (D) --; L. Schlenk, Knorr-Bremse Systeme für Schienenfahrzeuge GmbH, München (D) --; Microstructure and Properties of an Ordered and a Disordered Ship Propeller Bronze --; J. Eberlein, R. Kaps, Mecklenburger Metallguss Waren (D). --; G. Benki[beta]r, G. Winkel, Universität Rost.

Text of Note

Machine derived contents note: I. Automotive. --; Iridium Alloy for Spark Plug Electrodes. --; B. Kempf, Degussa-Hüls AG, Hanau-Wolfgang (D). --; M. Graff, Universittät Darmstadt (D). --; J. Breme, Universität des Saarlandes (D). --; Fatigue Boundarie's Increase in a Mechanical Component. --; M. Marcantoni, E. Quadrini, University of Ancona (I). --; Intermetallic TiAl(Cr, Mo, Si) Alloys for Lightweight Engine Parts- Structure and Properties. --; G. Frommeyer, S. Knippscheer, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf (D). --; Carbon --; a Key Material in Future Motive Power Engineering. --; D. Kehr, J. Metz, R. Wolf, Schunk Kohlenstofftechnik GmbH (D). --; Characteristics of Cast and Welded Aluminium Nodes. --; J. Ødegård, M. Polanco, H. Sund, F. Syvertsen, SINTEF Materials Technology, Trondheim (N). --; Processing and Corrosion Control of a Magnesium Body Structure Element. --; G. Laudien, H. Schreckenberger, Volkswagen AG, Wolfsburg (D). --; Near-net-shape Magnesium-Structural Components for Automotive Applications. --; R. Heller, A. Mertz, R. Vomhof, K. Wei[beta]. --; 3-Dimensional Shaped Aluminium Foam Sandwiches. --; J. Baumeister, Fraunhofer-Institut Bremen (D). --; H. Gers, Honsel AG, Meschede (D). --; F. Baumgärtner, Schunk Sintermetalltechnik, Gie[beta]n (D). --; W. Seeliger, Wilhelm Karmann GmbH, Osnabrück (D). --; Eutectic Microstructural Evolution of a Thixoformed AZ91 after Solution Heat Treatment. --; V. Ezersky, M. Talianker, Ben-Gurion University of the Negev, Beer-Sheva (IL). --; F. Bardi, M. Cabibbo, E. Evangelista, S. Spigarelli, University of Ancona (I). --; Influence of Roller Burnishing on Surface Properties of Mg-Alloys: Roughness, Hardness, Residual Stresses, Corrosion. --; V. Kaese, M. Niemeyer, Tai Phan-tan, J. Röttger, H.K. Tönshoff, J. Winkler, University of Hannover (D). --; Near Net Shape Cast Sheet for Automotive Applications. --; L. Katgerman, W.H. Kool, E.N. Straatsma, Delft University of Technology (NL). --; Development of a Highly Ductile Die Casting Alloy of the Type AlMg3. --; R. Klos, H. Koch, Aluminium Rheinfelden GmbH (D). --; Innovative Casting Process of Lighter Steel Components For The Transport Industry (Brite/Euram III "ICARO" project). --; M. Corazzola, A. Fuganti, Centro Ricerche Fiat (I). --; Mathematical Modeling of Residual Stresses in Weld Simulated Specimen of Aluminum Alloy AA 6082. --; R. Aune, Ø. Gundersen, Z. Zhang, SINTEF Materials Technology, Trondheim (N). --; Pyrolysis-GC/MS in Damage Analysis of Polymers. --; P. Schwarzer, T. Tolksdorf, Volkswagen AG, Wolfsburg (D). --; Ultralight and Wear Resistant Ceramic Brakes. --; T. Henke, W. Krenkel, R. Renz, German Aerospace Center (DLR), Stuttgart (D). --; Porous Metal Fiber Components --; POMFICO. --; O. Delverdier, ATECA (F). --; H. Baur, M. Hartweg, K. Lempenauer, DaimlerChrysler AG, Ulm (D). --; O. Andersen, G. Stephani, Fraunhofer Institut (IFAM), Dresden (D). --; Extension of the Life Time of Thin Foils Made of Fe-Cr-Al Alloys. --; M. Juez-Lorenzo, V. Kolarik, Fraunhofer-Institut (ICT), Pfinztal (D). --; J. Klöwer, A. Kolb-Telieps, Krupp VDM, Werdohl (D). --; TiAl Automotive Valves --; Fabrication and Properties. --; V. Güther, A. Otto, 5 GfE Metalle und Materialien GmbH, Nürnberg (D). --; H. Baur, R. Joos, DaimlerChrysler AG, Ulm (D). --; O. Berg, M. Lohmann, Mahle Motorventile GmbH, Bad Homburg (D). --; G. Frommeyer, S. Knippscheer, Max-Planck-Institut, Düsseldorf (D). --; N. Eberhardt, H. Kestler, Plansee AG, Reutte/Tirol (A). --; Experimental Evaluation of Residual Stresses in the Aluminium Alloy AA 6082 by Use of the Satoh Test. --; R. Aune, Ø. Gundersen, SINTEF Materials Technology, Trondheim (N). --; Semi-Solid-Metal Casting 1 Thixocasting:, Determination of the Flow Characteristics of Semi-Solid Aluminium Albys. --; M. Fehlbier, O. Klaassen, P.R. Salun, Gie[beta]rei-Institut, RWTH Aachen (D). --; Short Fatigue Crack Problem in a Steel. --; C. Kaynak, Middle East Technical University, Ankara (TR). --; Processing of Natural Fibres with Hybrid-Technology. --; L. Frormann, G. Ziegmann, Institut für Polymerwerkstoffe und Kunststofftechnik, Clausthal-Zellerfeld (D). --; II. Aerospace. --; Laser Welding of 6xxx series Aluminum Alloys. --; G.N. Haidenmenopoulos, A.D. Zervaki, University of Thessaly, Volos (GR). --; Characterisation of Mechanical Properties and Corrosion Performance of Friction Stir Welded AA6013 Sheet. --; G. Biallas, R. Braun, C. Dalle Donne, G. Staniek, DLR --; Deutsches Zentrum für Luft- und Raumfahrt, Köln (D). --; Thermal Decomposition of Quasi-crystalline Phases and Mechanical Properties after Hot Extrusion of Rapidly Solidified Al-6.5Fe-1.5V. --; M. Lieblich, CENIM-CSIC, Madrid, (E). --; R. Dashwood R. Tongsri, Imperial College, London (UK). --; M. De Sanctis, A. Solina, R. Valentini, University of Pisa (I). --; 3D Textile Reinforcements for High-Performance Rotors. --; G. Archodoulakis, C. Herzberg, W. Hufenbach, L. Kroll, A. Langkamp, H. Rödel, Technische Universität Dresden (D). --; Design and Manufacture of 3D-Braided Textiles as a Reinforcement for Composites. --; H. Langer, DaimlerChrysler, Ottobrunn, Munich (D). --; A.K. Pickett, Engineering Systems International GmbH, Eschborn (D). --; M. Schneider, B. Wulfhorst, Institut für Textiltechnik der RWTH Aachen (D). --; Advanced Materials for RTM-Processing --; Characterization and Application of Non Crimp Fabrics (NCF). --; C. Kissinger, P. Mitschang, M. Neitzel, Institut für Verbundwerkstoffe GmbH, Kaiserslautern (D). --; Advances in Aerospace Materials and Structures. --; C.J. Peel, Defence Evaluation and Research Agency, Farnborough Hants (UK). --; Non-Destructive Imaging Techniques for Damage Evaluation of Smart Materials. --; T. Benziger, A. Hilbig, F. Michel, G. Mook, J. Pohl, University of Magdeburg (D). --; Microstructure and Mechanical Properties of Screw Press Forged Ti-17 Alloy. --; W. Horvath, M. Ortmayr, E.A. Werner, Technische Universität München (D). --; Microstructure and Mechanical Properties of Thermomechanically Processed Ti-25V-15Cr-xAl alloys. --; D. Rugg, W. Voice, Rolls-Royce Plc, Derby (UK). --; P.A. Blenkinsop, Y.G. Li, M.H. Loretto, The University of Birmingham, Edgbaston (UK). --; The Relationship between Thermomechanical Treatment and the Mechanical Properties of Ti-17. --; W. Horvath, Böhler Schmiedetechnik GmbH & Co KG, Kapfenberg (A). --; M. Ortmayr, E.A. Werner, TU-München (D). --; A New Tantalum Strengthened Alloy for Flying Gasturbines. --; U. Brill, Krupp VDM GmbH, Altena (D). --; Microstructure and Mechanical Properties of Power Beam Weld Superalloys during Cyclic Deformation. --; A. Fischer, T. Spirowski, S. Wei[beta] Universität GH Essen (D). --; Determination of the Microstructural Response of Titanium Alloys to Fabrication Processing for the Novel Design of Future Aeroengine Components. --; P.A. Blenkinsop, P. Bowen, A.R. Coleman, The University of Birmingham, Edgbaston (UK). --; Test Methods and Vibration Monitoring of Samples and Blades of Aircraft Enginges with Cracks. --; T. Khristenko, A. Roytman, Zaporozhye State University (UA). --; Physical Aging of Titanium/FM-5 Polyimide Adhesive Structural Laminates: Nanoindentation Measurement of the Interface Properties. --; J.D. Holbery, Centre Suisse d'Electronique et de Microtechnique SA, Neuchâtel (CH). --; R.M. Fisher, University of Washington, Seattle (USA). --; Platinum Base Alloys for High Temperature Space Applications. --; A. Behrends, B. Fischer, D. Freund, R. Völkl, University of Applied Science Jena (D). --; D. Lupton, J. Merker, W.C. Heraeus GmbH & Co KG, Hanau (D). --; Repair of (Gamma)TiAl Alloys by Diffusion-Brazing Technique. --; C. Colin, Y. Bienvenu, S. Tarral, Centre des Matériaux ENSMP Evry (F). --; J.F. Clément, J.P. Ferté, J.P. Henrion, SNECMA Evry (D).

Motor vehicles -- Materials -- Congresses.

Motor vehicles -- Materials.

Space vehicles -- Materials -- Congresses.

P.J. Winkler (editor).

Deutsche Gesellschaft für Materialkunde.

Federation of European Materials Societies.

P J Winkler

Electronic name

[Book]

Y