عنوان

Characterization of minerals, metals, and materials 2013

(Number (ISBN

1118605640

(Number (ISBN

9781118605646

Number

dltt

Title Proper

Characterization of minerals, metals, and materials 2013

General Material Designation

[Book]

Other Title Information

proceedings of a symposium /

First Statement of Responsibility

sponsored by the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals & Materials Society) ; edited by Jiann-Yang Hwang ... [et al.].

Place of Publication, Distribution, etc.

Hoboken, N.J. :

Name of Publisher, Distributor, etc.

TMS,

Date of Publication, Distribution, etc.

[2013]

Text of Note

"Held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013."

Text of Note

Includes bibliographical references and indexes.

Text of Note

Characterization of advanced materials. A comparison between the properties of SnO₂:F thin films prepared by using different doping compounds : HF and NH₄F / S. Ikhmayies -- Ab-initio calculations of the optical properties of [delta]-NbN single crystal / S. Ikhmayies, B. Hamad, and J. Khalifeh -- Photoluminescence of n-type CdS thin films / S. Ikhmayies -- Photoluminescence of P-type CdTe thin films / S. Ikhmayies -- Structural and electronic properties of [delta]-NbN single crystal : first principles calculations / S. Ikhmayies, B. Hamad, and J. Khalifeh -- Electrochemical characterization of lead-calcium alloy in agitated zinc electrowinning electrolyte / M. Mohammadi, F. Mohammadi, and A. Alfantzai -- Effects of rare earth Pr on the mechanical and electrochemical properties of Pb-based alloys / L. Jiang ... [et al.] -- Synthesis and characterization of Pb free piezoelectric ceramics - barium zirconate titanate - barium calcium titanate / P. Praveen ... [et al.] -- Characterization of high performance alloys. CHaracterizing primary dendritic microstructures to quantify the processing-structure-property relationship in single crystal nickel-based superalloys / M. Tschopp ... [et al.] -- Creep cavitation and fracture in single crystal superalloy / J. Zhao, J. Li, and S. Liu -- SCW corrosion resistance of candidate stainless steels / J. Li ... [et al.] -- High-cycle fatigue behavior of three ferrite stainless steels at 800°C / T. Liu ... [et al.] -- Characterization of minerals. A minimum pollution, low energy process for the recovery of cobalt and copper from complex sulphide minerals / Y. Hara -- Characteristics and non-isothermal crystallization kinetics of spinels in vanadium slag containing high content of chromium / H. Fang ... [et al.] -- Characterization and dry high intensity magnetic separation of Aswan iron ore / M. Sadawy -- Experiment study on sintering process optimization of high chromium vanadium-titanium magnetite / Y. Zhang ... [et al.] -- Physiochemical properties of slags generated during the copper converting process / H. Zhang ... [et al.] -- Reduction mechanisms of copper, cobalt and iron during low temperature recovery from mineral sulphide concentrates / Y. Hara -- Microwave dielectric characterization of silicon dioxide / Z. Peng ... [et al.] -- The effect of temperature on dielectric permitivity and microwave absorption properties of anthracite in microwave field / C. Liu ... [et al.] -- Recovery of high grade SnO₂ from cassiterite ore by microwave pretreatment, leaching and precipitation / G. Onyedika ... [et al.] -- Research on a novel technology of interactive roast of complex low-grade bismuth sulfide ore and pryolusite / Z. Wang ... [et al.] -- Characterization of soft materials. Comparison between HDPE/clay and HDPE/piassava fiber/clay treated by electron-beam radiation / A. Ortiz ... [et al.] -- Investigation on the thermal conductivity of inorganic-filler/resin composite / K. Monden -- Weibull analysis of the elastic modulus of bamboo fiber of the specimen dendrocalmus giganteus / L. Martins ... [et al.] -- Characterization of tensile properties of jute fiber reinforced epoxy composites / I. da Silva ... [et al.] -- Composite based on poly(vinyl alcohol), starch and sugarcane bagasse ashes / D. Jacomo ... [et al.] -- Tensile behavior of epoxy composites reinforced with continuous and aligned ramie fibers / A. Bevitori ... [et al.] -- Tensile strength of epoxy matrix composites reinforced with giant bamboo fibers (dendrocalmus giganteus) / L. Martins ... [et al.] -- Surface, joint, and processing of metals. A route to fracture prediction of spot welded boron steel in automotive applications / N. Raath ... [et al.] -- Coating characterization in CrN deposited by magnetron sputtering method on AISI 316 steel / I. Hilerio ... [et al.] -- Characterization for extraction applications. Co-intensification of bio-oxidizing as-bearing gold ores / L. Qian ... [et al.] -- Effect of copper and ammonia on consumption of thiosulfate in gold leaching solutions / J. Tao ... [et al.] -- Composition control of the precursor of fibrous Ni-Co alloy powders by coordinated coprecipitation / J. Zhan, C. Zhang, and Y. Yao -- The contrastive studies of microwave and conventional roasting CuCI residue from zinc hydrometallurgy / L. Shuaidan ... [et al.] -- Organophilization of a Brazilian kaolin clay / C. Matos ... [et al.] -- Indium extraction process from sulfuric pressure leaching solution for vacuum furnace germanium slag / H. Cao ... [et al.] -- Research on desilication technology from acid leaching of high-grade silic stone coal / Q. Zhao ... [et al.] -- Reformulation of a roofing tiles body / C. Vieira and S.N. Monteiro.

Text of Note

Characterization of ferrous metals. Application of thermoelectric power technique to study the static strain ageing of heavily cold drawn steel / A. Lamontagne ... [et al.] -- Analysis of the welded 100-meter heavy rails for passenger dedicated lines being broken during the straightening process / R. Chao, J. Yu, and Z. Min -- Effect of continuous cooling rate on microstructural transformation of 60Si₂CrCAT spring steel / B. Zhou ... [et al.] -- Effect of centrifugal and gravity casting technique over metallographic and mechanical properties of spheroidal graphite iron / D. Gowda H.S., M. Pudukottah, and M. Herbert -- Inclusions removal by gas bubbles in steel continuous casting tundish / M. Zhu ... [et al.] -- Strength and ductility of ultrafine grained 304SS prepared by accumulative rolling and annealing / W. Xue ... [et al]. -- Characterization of nonferrous metal and alloys. Characterization of AA5754 alloy for identification of Barlat's YLD2000-2d yield criterion / O. DIon-Martin ... [et al.] -- Characterization technologies. Automated quantification of SiC-particles in solidified A356 aluminum using Imagepro® Plus 7.0 / R. Fritzsch ... [et al.] -- Quantitative x-ray fluorescence determination of elemental composition of micro-constituents smaller than the electron probe volume / A. Gesing ... [et al.] -- Three-dimensional duplex morphology of MnS-AIN and thermodynamic analysis / Y. Gong ... [et al.] -- Characterization of inorganic materials. Dissolution mechanism of lime in FeOx-SiO₂-V₂O₃-TiO₂ slag / R. Tang ... [et al.] -- Estimation of slag in ferrochromium / R. Kozicki, G. Wrightson, and E. Graham -- Improved thermal shock resistance of shaped alumina=chromia products / S. Breyner, T. Prietl, and K. Santowski -- Solidification characteristics of Fe-Mn alloy during near-rapid solidification / Y. Guo ... [et al.] -- The effect of work-hardening and heat treatment of mild-carbon steel on cyclic deformation behavior / G. Tober ... [et al.] -- Green materials. Study on the hydraulic ash-slag cementitious composites (HA-SC) solidification of dredged sludge / Z. Shu Jing and H. Xinghua -- Evaluation of sisal fibers components by infrared spectroscopy / A. Camposo ... [et al.] -- Tensile behavior of epoxy composites reinforced with continuous and thinner buriti fibers / G. Altoé ... [et al.] -- Influence of the red mud content in mechanical properties of natural fiber-reinforced polymer composites / M. Oliveira ... [et al.] -- Flexural mechanical characterization of polyester composites reinforced with continuous banana fibers / S. Monteiro ... [et al.] -- Characterization for environmental applications. LaCoO3 : the efficient catalyst to purify pollutant gases / F. Fazlollahi, H. Atashi, and M. Sarkari -- Characterization of the clay soil of the neighborhood codin, located in Campos (RJ), to produce soil-cement blocks / J. Alexandre, A. Azevedo, and G. Xavier -- Study of mortars used in the projection mechanized / G. Xavier, J. Alexandre, and A. Azevedo -- Study on treatment of coking wastewater by three-dimensional fluid bed electrode reactor combined with Fenton process / L. Zhang ... [et al.] -- Study on correlation between COD and TOC of industrial wastewater / S. Liu, G. Xue, and J. Zhou -- Photocatalytic activity of TiO₂-doped diopside / H. Yang ... [et al.] --

0

0

Materials-- Analysis, Congresses.

Materials-- Testing, Congresses.

Hwang, Jiann-Yang.

Minerals, Metals and Materials Society., Annual Meeting(142nd :2013 :, San Antonio, Tex.)

Minerals, Metals and Materials Society., Extraction and Processing Division.

Wiley Online Library (Online service)

Date of Transaction

20190629155223.0

Electronic name

[Book]

Y