عنوان

Pile design and construction rules of thumb

(Number (ISBN

0080559166

(Number (ISBN

661127328X

(Number (ISBN

9780080559162

(Number (ISBN

9786611273286

Erroneous ISBN

0750687630

Erroneous ISBN

9780750687638

Number

dltt

Title Proper

Pile design and construction rules of thumb

General Material Designation

[Book]

First Statement of Responsibility

Ruwan Rajapakse.

Place of Publication, Distribution, etc.

Burlington, MA :

Name of Publisher, Distributor, etc.

Elsevier/Butterworth-Heinemann,

Date of Publication, Distribution, etc.

c2008.

Text of Note

Includes bibliographical references and index.

Text of Note

Cover -- Table of Contents -- Preface -- PART 1: Introduction to Pile Selection -- Chapter 1 Site Investigation and Soil Conditions -- 1.1 Literature Survey -- 1.2 Site Visit -- 1.3 Subsurface Investigation -- 1.4 Soil Types -- 1.5 Design Parameters -- 1.6 Selection of Foundation Type -- Chapter 2 Pile Types -- 2.1 Timber Piles -- 2.2 Steel H-Piles -- 2.3 Pipe Piles -- 2.4 Precast Concrete Piles -- 2.5 Casing Removal Type -- 2.6 Precast Piles with Grouted Base -- 2.7 Mandrel-Driven Piles -- 2.8 Composite Piles -- 2.9 Fiber-Reinforced Plastic Piles (FRP Piles) -- Chapter 3 Selection of Pile Type -- CASE 1 -- CASE 2 -- CASE 3 -- PART 2: Design of Pile Foundations -- Chapter 4 Pile Design in Sandy Soils -- 4.1 Equations for End Bearing Capacity in Sandy Soils -- 4.2 Equations for Skin Friction in Sandy Soils -- 4.3 Pile Design Using the Meyerhof Equation (Correlation with SPT (N) -- 4.4 Modified Meyerhof Equation -- 4.5 Parameters that Affect the End Bearing Capacity -- 4.6 Critical Depth for Skin Friction (Sandy Soils) -- 4.7 Critical Depth for End Bearing Capacity (Sandy Soils) -- Chapter 5 Pile Design in Clay Soils -- 5.1 Shear Strength (Clays) -- 5.2 Cohesion in Clay Soils -- 5.3 End Bearing Capacity in Clay Soils (Different Methods) -- 5.4 Skin Friction in Clay Soils (Different Methods) -- 5.5 Bored Piles in Clay Soils -- 5.6 Case Study: Foundation Design Options -- 5.7 Maximum Allowable Pile Loads -- Chapter 6 Pile Design: Special Situations -- 6.1 Timber Pile Design -- 6.2 Case Study-Bridge Pile Design (Timber Piles) -- 6.3 Auger Cast Pile Design (Empirical Method) -- 6.4 Capacity of Grouted Base Piles -- 6.5 Case Study: Comparison between Bored Piles and Driven Piles -- 6.6 Case Study: Friction Piles -- 6.7 Open-End Pipe Pile Design-Semi-empirical Approach -- 6.8 Design of Pin Piles-Semi-empirical Approach -- 6.9 Recommended Guidelines for Pile Design -- 6.10 ASTM Standards for Pile Design -- 6.11 Case Study: Prestressed Concrete Piles -- 6.12 Driving Stresses -- 6.13 Maximum Allowable Driving Stresses -- 6.14 Uplift Forces -- 6.15 Load Distribution-Skin Friction and End Bearing -- Chapter 7 Design of Caissons -- 7.1 Design of Caissons -- 7.2 Construction Methodology of Caissons (Dry Method) -- 7.3 Caisson Inspection in Soil -- 7.4 Meyerhof Equation for Caissons -- 7.5 Caisson Design for Uplift Forces -- 7.6 Caisson Design in Sandy Soils -- 7.7 Belled Caisson Design -- 7.8 Settlement of Caissons -- Chapter 8 Design of Pile Groups -- 8.1 Introduction -- 8.2 Eccentric Loading on a Pile Group -- 8.3 Double Eccentricity -- 8.4 Pile Groups in Clay Soils -- Chapter 9 Pile Settlement -- 9.1 Pile Settlement Measurement -- 9.2 Stiffness of Single Piles -- 9.3 Settlement of Single Piles (Semi-empirical Approach) -- 9.4 Pile Settlement Comparison (End Bearing vs. Floating) -- 9.5 Critical Depth for Settlement -- 9.6.

0

Title

Pile design and construction rules of thumb.

International Standard Book Number

0750687630

Piling (Civil engineering)

TEC-- 063000

Rajapakse, Ruwan.

Knovel (Firm)

Date of Transaction

20110913074454.0

Electronic name

[Book]

Y