بررسی تطبیقی شدت جزایر حرارتی بر اساس هندسه شهری (مطالعه موردی :محلات کوی ولیعصر و شنب غازان شهر تبریز)
/فاطمه امان زاده فرد
: برنامهریزی و علوم محیطی
، ۱۳۹۹
، راشدی
۸۰ص
چاپی - الکترونیکی
کارشناسی ارشد
سنجش از دور و سیستم اطلاعات جغرافیایی گرایش مطالعات شهری و روستایی
۱۳۹۹/۰۴/۱۰
تبریز
گسترش شهرنشینی و پیشرفت فعالیتهای صنعتی از یک سو و افزایش جمعیت از سوی دیگر باعث ایجاد تغییراتی در خرد اقلیم مناطق شهری میشود که یکی از این تغییرات، تشکیل جزایر حرارت شهری است .پدیده جزیره حرارتی عبارت از گرمای اضافی در سطح زمین و اتمسفر نواحی شهری در مقایسه با حومه آن صمیباشد .به دلیل افزایش شتابان روند شهرنشینی و همچنین فعالیتهای صنعتی و ساخت و سازهای عظیم ساختمانی، این پژوهش با هدف توسعه شبیهسازی و محاسبه حداکثر شدت جزایر حرارت شهری (UHImax) با توجه به شرایط هندسه شهری در مناطق کوی ولیعصر و شنب غازان تبریز انجام شد .روش این تحقیق مبتنی بر معادله عددی -نظری Oke میباشد .جهت انجام این کار، ابتدا هندسه محلات مورد نظر با توجه به شعاع ۲۰ متری در کوی ولیعصر و ۱۵ متری در شنب غازان از محور معابر به بلوکهای مجزایی تقسیمبندی و سپس نسبت عرض معابر و ارتفاع بناها (H/W) در نرمصافزار Arcgis محاسبه و در پایان بر اساس معادلهOke ، UHImax محاسبه و شبیهسازی گردید .نتایج حاصل از این شبیه-سازی نشان داد که در مناطق کوی ولیعصر و شنب غازان شهر تبریز هر چه بناها بلندمرتبهصتر و عرض معابر کمتر باشد میزان شدت جزیره حرارتی بیشصتر، و هر قدر عکس این شرایط حاکم باشد مقدار شدت جزیره حرارتی نیز کمصتر خواهد بود .همچنین زمانی که نسبتH/W ، در کوی ولیعصر بین ۲۵/۰ تا ۳۲/۰ است، حداکثر شدت جزیره حرارتی در محدوده ۹/۱ تا ۹/۲ درجه سانتیصگراد باقی میصماند .اما وقتی که نسبت H/W در محدوده ۴۳/۰ تا ۲۳/۱ قرار داشته باشد، ارزش حاصل از حداکثر جزیره حرارتی بین ۴ تا ۲/۸ درجه خواهد بود .در منطقه شنب غازان نیز زمانی که نسبت H/W بین ۱۹/۰ تا ۳۸/۰ است، حداکثر شدت جزیره حرارتی در محدوده۸/۰ تا ۶/۳ درجه سانتیصگراد باقی میصماند .اما وقتی که نسبت H/W در محدوده ۴۵/۰ تا ۸۵/۰ متفاوت است، ارزش حاصل از حداکثر جزیره حرارتی بین ۲/۴ تا ۸/۶ درجه خواهد بود .نتایج دیگر این مدل نشان داد که درکوی ولیعصر، از میان ۱۰ بلوک، بلوک D با ۹/۱ درجه و بلوک H با ۲/۸ درجه سانتیصگراد دارای کمصترین و بیشصترین مقدار شدت جزیره حرارتی میصباشد .در منطقه شنب غازان نیز از میان بلوکصها، بلوک G با ۸/۰ درجه کمترین و بلوک B با ۸/۶ درجه بیشترین شدت جزیره حرارتی را به خود اختصاص دادهصاند .بنابراین میصتوان اذعان نمود که با توجه به عرض معابر و ارتفاع ساختمانصها در کوی ولیعصر و منطقه شنب غازان به ترتیب بلوک D و G استاندارترین و بلوک H و B غیر استاندارترین پیکربندی را در این مناطق دارا میصباشند .برآورد حاصل از مدل رگرسیون نیز نشان داد که عرض معابر با ۹۱/۰ در کوی ولیعصر و ۹۲/۰ در شنب غازان نسبت به ارتفاع ساختمان با ۶/۰ در کوی ولیعصر و ۵/۰ در شنب غازان اثر بیشصتری در تغییرات شدت جزیره حرارتی دارد .همچنین نتایج حاصل از دمای سطح زمین در مناطق مورد مطالعه نیز نشان داد که کوی ولیعصر در دو فصل زمستان و تابستان به ترتیب بیشترین و کمترین دما را دارد در حالی که دمای سطح زمین در هر دو فصل زمستان و تابستان در منطقه شنب غازان تفاوت چندانی نداشته و دمای سطح زمین در این منطقه در سطح پایینی قرار دارد
C had the lowest and highest heat island intensity. Among the blocks in Ghazan, G block with 0.8 degrees and B block with 6.8 degrees had the highest intensity of heat island. Therefore, it can be stated that due to the width of the passages and the height of the buildings in Valiasr Cui and Shaban area of Ghazan, block D and G have the most standard configuration and block H and B have the most non-standard configuration, respectively. Estimation of the regression model also showed that the widths of passages with 0.91 in Valiasr Cui and 0.92 in Ghazan sunset compared to building height with 0.6 in Valiasr Cui and 0.5 in Ghazan sunset had more effect on intensity changes. The island has heat. Also the results of ground surface temperature in the study areas showed that Vali Asr had the highest and lowest temperatures in winter and summer respectively, while the ground surface temperature in both winter and summer in Shaban area of Ghazan was significantly different. And the surface temperature in the area is below freezing.░C and the H block with 8.2░C. But when the H/W ratio is in the range of 0.45 to 0.85, the maximum thermal island value will be between 4.2 and 6.8 degrees. Other results of this model showed that among the 10 blocks, the D block with 1.9░C. But when the H/W ratio is in the range of 0.43 to 1.23, the value of the maximum heat island will be between 4 and 8.2 degrees. Also in the Ghazan Shab region, when the H/W ratio is between 0.19 to 0.38, the maximum heat island remains in the range of 0.8 to 3.6░The expansion of urbanization and the development of industrial activities on the one hand, and the increase in population on the other, cause changes in the micro-climate of urban areas. One of these changes is the formation of urban heat islands. The phenomenon of thermal island is the excess heat at the surface and atmosphere of urban areas compared to its suburbs. Due to accelerated urbanization process as well as industrial activities and massive construction, this study aimed to develop simulation and calculation of UHImax intensity according to urban geometry conditions in Valiasr and Shaban regions of Tabriz. The methodology of this research is based on Oke's theoretical numerical equation. To do this, firstly, the geometry of the desired neighborhoods is divided into separate blocks according to the radius of 20 m in Valiasr alley and 15 m in the Ghazan branch from the axis of the passageways and then in the Arcgis software. Finally, UHImax was calculated and simulated based on the Oke equation. The results of this simulation showed that the higher the height and the lower the width of the passageways, the higher the thermal island intensity, and the higher the thermal island intensity, the higher the buildings height and the lower the width of the passageways. It will also be less. Also, when the H / W ratio is in the range of 0.25 to 0.32, the maximum heat island remains in the range of 1.9 to 2.9