بازآرایی شبکههای توزیع جهت افزایش حد بارگذاری با لحاظ کردن تلفات توان راکتیو شبکه
[پایان نامه]
جواد رضایی
صنعتی سهند
۱۴۰۱
۱۱۶ص.
مصور، جدول، نمودار
CD
کارشناسی ارشد
مهندسی برق- سیستمهای قدرت
۱۴۰۱/۰۹/۰۱
این پایان نامه یک روش دومرحلهای برای بهینهسازی شبکه توزیع از طریق بازآرایی در جهت کاهش تلفات اکتیو و راکتیو، بهبود پروفیل ولتاژ و افزایش حد بارگذاری بحرانی است. ابتدا در شبکه مورد مطالعه، جایابی و مقداردهی خازن با تابع هدف کاهش تلفات اکتیو شبکه انجام داده و سپس روش دو مرحلهای بازآرایی را در شبکه خازنگذاری شده اعمال میکنیم. چهارچوب اصلی روش دو مرحلهای برای بازآرایی، از دو مرحله اصلی تشکیل میشود. در مرحله اول با استفاده تلفات توان راکتیو، کلیدهایی برای باز شدن انتخاب کرده و ذخیره میشوند. در مرحله دوم با استفاده از کلیدزنی و تغییر آرایش سیستم با تابع هدف کاهش تلفات اکتیو، کلیدهایی برای باز شدن انتخاب و همانند مرحله قبل ذخیره میشوند. نهایتا، از بین کلیدهای منتخب برای باز شدن هر دو مرحله، کلیدهایی به عنوان کلیدهای نهایی برای باز شدن در شبکه برگزیده میشوند. این روش با استفاده از چهار الگوریتم ژنتیک(GA)، الگوریتم بهینهسازی ازدحام ذرات(PSO)، الگوریتم جستجوی هارمونی بهبود یافته(IHS) و الگوریتم جستجوی فاخته(CSA) اجرا شده و نتایج با یکدیگر مقایسه گردیده است تا بهترین الگوریتم برای اجرای روش انتخاب شود. این روش با استفاده از نرم افزار متلب مدل سازی شده و در شبکه تست 33 باسه IEEE پیاده سازی شده است.
Feeder reconfiguration is commonly used in the distribution system for real loss minimization. However, in the stressed system condition, loadability limit enhancement is an important issue. This aspect has not been paid much attention in the literature. Metaheuristic methods can solve this problem at a high computational cost. In this view, an efficient two-stage reconfiguration with capacitors placement is proposed for the same. Before starting the two-stage reconfiguration, Placement and initialization of the capacitor in the network. in the capacitive network, two-stage reconfiguration is performed. In the first stage of two-stage algorithm, an efficient reactive power loss minimization-based reconfiguration plan is obtained. In the second-stage Optimization algorithms are used for reconfiguration with loadability enhancement. This method is implemented with four algorithms (Genetic Algorithm (GA), Particle Swarm Optimization Algorithm (PSO), improved harmony search algorithm (IHS), Cuckoo Optimization Algorithm (CSA)). It is important to note that this algorithm is used only when system load is near the critical load; otherwise, the conventional real power loss minimization reconfiguration plans can be used. Results for a 33-bus balanced test distribution system confirm the potential of the proposed method
Distribution networks reconfiguration for loadability limit enhancement by reactive power loss considering
الگوریتمهای بهینه سازی
بازآرایی، شبکههای توزیع
کاهش تلفات
الگوریتمهای بهینه سازی، بازآرایی، شبکههای توزیع، کاهش تلفات، خازنگذاری، حد بارگذاری
Optimization Algorithms, reconfiguration, distribution system, capacitors placement, loadability limit