استفاده از خاکستر فرار برای جذب CO۲ از دودکش فرایندهای احتراقی
[پایاننامه]
Use of Fly Ash for Surface Adsorption of CO۲ From Flue Gas Combustion Processes
/فرشته محمودی برمس
: مهندسی شیمی
، ۱۴۰۱
۸۱ص.
:
زبان: فارسی
زبان چکیده: فارسی
چاپی - الکترونیکی
مصور، جدول، نمودار
کارشناسی ارشد
مهندسی شیمی- فرایندهای جداسازی
۱۴۰۱/۰۶/۰۱
صنعتی سهند
جذب و ذخیرهCO ۲ (CCS) به عنوان بخش مهمی از تلاشهای جهانی برای مبارزه با گرمایش جهانی از طریق کاهش انتشار گازهای گلخانهای در نظر گرفته میشود .برای جداسازی گازCO ۲ روشهای متعددی ارائه شده است که به دلیل امکان استفاده مجدد و عدم ایجاد خوردگی، اقتصادیترین آنها میتواند استفاده از جاذبهای جامد باشد .در این پژوهش از خاکستر فرار به عنوان جاذب و منبع سیلیس برای سنتز جاذبهای سیلیکاییSiO ۲ وMCM -۴۱ استفاده شد .سیلیس با استفاده از روش انحلال قلیایی استخراج شد .در این روش برای سنتز این جاذبها از روش رسوبدهی باCO ۲ به دلیل زمان کم سنتز و به کارگیریCO ۲ در سنتز استفاده شد .برای بررسی اثرات حجم حفرات، متوسط قطر حفرات و سطح ویژه با هدف بارگذاری بیشتر آمین و افزایش ظرفیت جذبCO ۲، در سنتزSiO ۲ از سورفکتنت CTAB استفاده شد وMCM-۴۱ حاصل شد .با توجه به تمایل بالای آمینها به جذبCO ۲، از عاملدار کردن جاذبهای سنتز شده با آمینهای TEPA و DEA استفاده شد .جاذبها با درصدهای مختلفی از TEPA عامل دار شد و بعد از بدست آوردن مقدار آمین بهینه، تاثیر استفاده از ترکیب TEPA با DEA مورد بررسی قرار گرفت .بالاترین میزان جذبCO ۲، تحت شرایط گاز دودکش شبیه سازی شده( ۱۵ حجمیCO ۲ و ۸۵ حجمیN ۲) مربوط به جاذبSiO ۲ که توسط ۵۰ وزنی آمین( ۲۸ وزنی TEPA و ۲۲ وزنی DEA) عاملدار شده بود، ۱۹۸ میلیگرم بر گرم جاذب محاسبه شد .سپس تغییرات میزان جذبCO ۲ با زمان، تاثیر مقدار جاذب بر ظرفیت جذب، تمایل جاذب به جذبN ۲ و چرخه جذب و واجذب جاذب در پنج مرحله مورد بررسی قرار گرفت .در کل جاذب اصلاح شده با ۵۰ وزنی آمین( ۲۸ وزنی TEPA و ۲۲ وزنی DEA) به دلیل کاهش ممانعت فضایی گروه-های عاملی عملکرد بهتری نشان داده است.
CO2 capture and storage (CCS) is considered an important part of global efforts to combat global warming by reducing greenhouse gas emissions. Several methods have been proposed for the separation of CO2 gas, and due to the possibility of reuse and the absence of corrosion, the most economical of them can be the use of solid absorbents.In this study, fly ash used as an adsorbent and silica source for the synthesis of SiO2 and MCM-41 adsorbents. Silica was extracted using alkaline dissolution method. CO2-assisted precipitation method was used for the synthesis of these adsorbents due to the short synthesis time and the use of CO2 (in line with the purpose of the research) in the synthesis. To investigate the effects of pore volume, average pore diameter and specific surface area with the aim of loading more amine and increasing CO2 adsorption capacity, surfactant CTAB was used in the synthesis of SiO2 and MCM-41 was obtained. Due to the highest level of amines for CO2 absorption, functionalization of synthesized adsorbents with TEPA and DEA amines is used. The adsorbents were functionalized with different percentages of TEPA, and after obtaining the optimum amount of amine, the effect of using the combination of TEPA with DEA was investigated. The highest amount of CO2 adsorption, 198 mg/g of the adsorbent, was obtained under simulated flue gas conditions (15 by volume of CO2 and 85 by volume of N2), which corresponds to the SiO2 adsorbent functionalized with 50 by weight of amine (28 by weight TEPA and 22 by weight of DEA).Then, the change of the amount of CO2 adsorption with time, the effect of the amount of adsorbent on the capacity, the adsorption of the adsorbent to the adsorption of N2 and the adsorption and desorption cycle of the adsorbent were investigated in five stages.
ba
Use of Fly Ash for Surface Adsorption of CO۲ From Flue Gas Combustion Processes
خاکستر فرار
جذب CO۲
سنتز Sio۲
سنتز MCM-۴۱
Fly ash, CO2 adsorption, SiO2 synthesis, MCM-41 synthesis, amine, TEPA, DEA