• الرئیسیة
  • البحث المتقدم
  • قائمة المکتبات
  • حول الموقع
  • اتصل بنا
  • نشأة

عنوان
Optimization of Truss Structures Using Harmony Search Algorithm

پدید آورنده
Mirza, Mohammad

موضوع
Civil engineering

رده

کتابخانه
کتابخانه مطالعات اسلامی به زبان های اروپایی

محل استقرار
استان: قم ـ شهر: قم

کتابخانه مطالعات اسلامی به زبان های اروپایی

تماس با کتابخانه : 32910706-025

TL53364

انگلیسی

Optimization of Truss Structures Using Harmony Search Algorithm
[Thesis]
Mirza, Mohammad
Kim, Sanghun

Temple University
2020

95 p.

M.S.C.E.
Temple University
2020

The design of many engineering systems can be a complex process, which means many possibilities and factors must be considered during problem formulation. The process of searching for a design that meets both performance and safety standards with reliable impact is the goal of structural optimization. Structural optimization is an approach whereby the structural design is subjected to being optimized in terms of weight while maintaining all design constraints such as stress, strain, and stability. Structural design optimization problems involve searching for the minimum of the stated objective function, usually the weight of the structure and constructability. Trusses are triangular frame works in which the members are subjected to essentially axial forces due to externally applied load at the joints only. Truss structures can be optimized by varying the structure's size, shape, and topology. Although combining these three prototypes of optimization can ultimately a yield better result, the underlying mathematical model becomes complicated. Over the last decade, new optimization strategies based on metaheuristic algorithms have been devised to obtain the optimal design for structural systems. Harmony search (HS) is a metaheuristic algorithm proposed by Geem et al., inspired by the observation that the aim of music is to search for a perfect state of harmony. In this research, the implementation of HS algorithm has been applied to optimize the size of truss structures that results in the weight reduction of the truss members. The results obtained with HS were compared to those obtained from the original sizes before optimization, to verify the influence on the optimal design of truss structures subjected to stresses, deflections, vertical and lateral displacements, and buckling constrains.

Civil engineering

Mirza, Mohammad

Kim, Sanghun

Temple University

 مطالعه متن کتاب 

p

[Thesis]
276903

a
Y

الاقتراح / اعلان الخلل

تحذیر! دقق في تسجیل المعلومات
ارسال عودة
تتم إدارة هذا الموقع عبر مؤسسة دار الحديث العلمية - الثقافية ومركز البحوث الكمبيوترية للعلوم الإسلامية (نور)
المكتبات هي المسؤولة عن صحة المعلومات كما أن الحقوق المعنوية للمعلومات متعلقة بها
برترین جستجوگر - پنجمین جشنواره رسانه های دیجیتال